University of Lampung | LPPM-UNILA Institutional Repository (LPPM-UNILA-IR)

Library of Congress Subject Areas (791)
- T Technology (791)
  - TJ Mechanical engineering and machinery (791)

Group by: Creators | Item Type

Number of items at this level: 791.

Article

., Martinus and Aripta, Titin Putri and Ningarta, Ananda Dharma and ., Wahyu (2018) PEMBUATAN INSECT TRAP BERBASIS UAV (UNMANNED AERIAL VEHICLE). BAROMETER, 3 (1). pp. 78-82. ISSN 1979-889X

., Martinus and Juliardi, Arif and Adi, I Putu Dharma (2018) PEMBUATAN SISTEM KONTROL MOTOR DC UNTUK PROTOTIPE KENDARAAN LISTRIK RADEN INTAN 2. BAROMETER, 3 (2). pp. 122-124. ISSN 1979-889X

., Martinus and Susilo, Adi and Telaumbanua, Mareli and Muhammad, Meizano Ardhi (2020) RANCANG BANGUN SISTEM PENGHITUNG JUMLAH DAN MASSA BIJI KOPI BERBASIS MIKROKONTROLER PADA KONVEYOR SABUK. BAROMETER, 5 (2). pp. 267-271. ISSN 1979-889X

., Martinus and Suudi, Ahmad and Putra, Rahmat Dendi and Muhammad, Meizano Ardhi (2020) PENGEMBANGAN WAHANA UKUR KECEPATAN ARUS ALIRAN SUNGAI. BAROMETER, 5 (1). pp. 220-223. ISSN 1979-889X

., Martinus and Telaumbanua, Mareli and Andrianto, Rifqi Rahma and Muhammad, Meizano Ardhi and Ferbangkara, Sony (2021) Design and Construction of Duku Sorting System Based on Size Using Microcontroller on Conveyor Work. International Journal of Electronics and Communications System, 1 (2). ISSN ISSN: 2798-2610

Adi Sembiring, Janwira and Wardono, Herry and Eka Risano, A. Yudi (2020) Pemanfaatan Campuran Zeolit dan Arang Sekam Teraktifasi Fisik Sebagai Filter Udara Untuk Meningkatkan Akselerasi Mesin Sepeda Motor Bensin 4-Langkah. Jurnal Ilmiah Teknik Mesin, 8 (2). pp. 29-33. ISSN 2337 4780

Ahmad, Yonanda and Amrizal, Amrizal (2021) Karakteristik Kolektor Surya Pelat Datar Aliran Spiral Menggunakan Metode Simulasi CFD. Open Science and Technology, 1 (1). ISSN 2776-1681

Ahmad Yonanda, Yonanda and Amrizal, Amrizal Karakteristik Kolektor Surya Pelat Datar Aliran Spiral Menggunakan Metode Simulasi CFD. Open Science and Technology.

Ahmad Yonanda, Yonanda and Amrizal, Amrizal and Amrul, Amrul (2019) Simulasi Unjuk Kerja Termal Dan Pressure Drop Kolektor Surya Pelat Datar Aliran Serpentine Menggunakan Metode-CFD. Mechanical Jurnal Ilmiah Teknik Mesin, 10 (1). pp. 23-29. ISSN 2460-1888

Ahmad Yonanda, Yonanda and Amrizal, Amrizal and Harmen, Harmen and Akhmad Riszal, Riszal Photovoltaic (PV) thermal performance simulation using segmentation lapping fin passive cooling. Polimesin.

Ahmad Yonanda, Yonanda and Amrizal, Amrizal and Harmen, Harmen and Hadi, Prayitno Simulasi unjuk kerja kolektor surya hybrid PV/T berdasarkan jarak susunan pipa absorber berbentuk spiral. TURBO. ISSN p-ISSN: 2301-6663, e-ISSN: 2477-250X

Akbar, B.Rachmad and Wardono, Herry and Susila, M Dyan (2014) Pengaruh Variasi Jenis Air dan Temperatur Aktivasi dalam Campuran Fly Ash Bentuk Pelet terhadap Prestasi Mesin dan Emisi Gas Buang Sepeda Motor Bensin 4 Langkah. FEMA Jurnal Ilmiah Teknik Mesin, 2 (1). ISSN 2337-4780

Akhmad, Riszal (2019) Analysis Effect Ratio of Rotation Rotors and Tip Speed Ratio (TSR) On The Variations of Distance Rotors Counter Rotating Wind Turbine (CRWT). Journal of Physics: Conference Series, 1273 (012060). pp. 1-6. ISSN Print : 1742-6588 Online : 1742-6596

Akhyar Ibrahim, Gusri and Hamni, Arinal and Purnomo, Bagus and harun, suryadiwansa and Burhanuddin, Yanuar The machined surface of magnesium AZ31 after rotary turning at air cooling condition. Materials Science and Engineering, 344. ISSN 1757-899X

Akmal, Jamiatul (2005) An Assesment of The Maximum Stresses in The Intersecting Cylinders Subjected to Internal Pressure_SNMI UNTAR 2005. Prosiding Seminar Nasional Mesin dan Industri (SNMI) 2005. pp. 305-310. ISSN 979-95752-5-7

Akmal, Jamiatul (2012) Kaji Eksperimen untuk Distribusi Tegangan Geser Lapisan Adesif pada Sambungan Pipa Komposit. Proceeding Seminar Nasional Energi Terbarukan & Produksi Bersih 2012, - (-). pp. 299-303. ISSN 0016087403

Akmal, Jamiatul (2010) Mixed-Adhesive Technique on Joint Strength of Torque Loaded Tube Optimization. The 4th Indonesia Japan Joint Scientific Symposium 2010, 1 (1). 01C12-01C12. ISSN 2087-2577

Akmal, Jamiatul (2015) PERANCANGAN BALOK BETON PROFIL RINGAN UNTUK PEMASANGAN LANTAI BANGUNAN BERTINGKAT YANG EFEKTIF. Prosiding Seminar Nasional Tahunan Teknik Mesin ke-14 Banjarmasin. MT39-MT39. ISSN 978-602-73732-0-4

Akmal, Jamiatul (2015) Pengaruh Ovality terhadap Kekuatan dan Ekspansi Volume pada Tangki Toroidal dengan Beban Tekanan Internal (Internal Pressure). Mechanical Jurnal Ilmiah Teknik Mesin, 5 (2). pp. 43-47. ISSN 2087-1880

Akmal, Jamiatul (2013) Sambungan Adesif Model Tirus-Dalam untuk Pipa Komposit yang Mendapat Beban TekananInternal. Prosiding (edisi revisi) Seminar Nasional Tahunan Teknik Mesin XII, 2013 (-). pp. 847-853. ISSN ISBN 978-979-8510-61-8

Akmal, Jamiatul (2010) Studi Parameter dan Kondisi Anomali dalam Analisis Resiko Pipa Penyalur Bawah Laut. Prosiding Seminar Nasional Tahunan Teknik Mesin ke-9 UNSRI, - (-). pp. 387-397. ISSN 978-602-97742-0-7

Akmal, Jamiatul and Badaruddin, Mohammad and Ismoyo, Muh Kresna and Yuwono, Suripto D. (2019) Optimization of matrix compositions of Al2O3, SiO2, Caolin, and CaO on the mechanical properties of a geopolymer composite with short carbon fiber. IOP Conf. Series: Materials Science and Engineering, 602 (01207). pp. 1-7. ISSN 17578981

Akmal, Jamiatul and Lubis, Asnawi (2008) Experimental Method for the Determination of Stress Concentration Factors of Stepped-shafts of Circular-to-square Cross Section under Pure Torsion. Jurnal Teknik Mesin ITS, 8 (3). pp. 194-200. ISSN 1411-9471

Akmal, Jamiatul and Lubis, Asnawi and Tanti, Novri and Nuryanto, Nuryanto and Murti, Adam Wisnu (2021) The TLP 2-DOF as an alternative model for extreme wave application. Kapal: Jurnal Ilmu Pengetahuan dan Teknologi Kelautan, 18 (2). pp. 80-87. ISSN 2301-9069

Amrizal, Amrizal (2023) Effects of Fin Height, Fin Thickness and Reynolds Number on Heat Transfer Enhancement of Flat-Plate Thermal Collector: A Numerical Analysis. CFD Letters, 15 (4). pp. 53-63. ISSN 2180 - 1363

Amrizal, Amrizal Hybrid photovoltaic–thermal solar collectors dynamic modeling. Applied Energy. ISSN 2077-3528

Amrizal, Amrizal KARAKTERISTIK MATERIAL ABSORBER KOLEKTOR SURYA PELAT DATAR. Jurnal Material dan Energi Indonesia. ISSN 2087-748X (Unpublished)

Amrizal, Amrizal Pengaruh Jarak antar Pipa Absorber terhadap Unjuk Kerja Kolektor Surya PV/T Pelat Datar Menggunakan Metode CFD. Jurnal Rekayasa Mesin. ISSN 2540-7678

Amrizal, Amrizal Unjuk Kerja Termal dan Elektrikal Kolektor Photovoltaic/Thermal (PV/T) Berdasarkan Ketebalan Sirip Absorber. Jurnal Mechanical. ISSN 2087-1880

Amrizal, Amrizal A dynamic model based on the piston flow concept for the thermal characterization of solar collectors. Applied Energy. ISSN 2077-3528

Amrizal, Amrizal and Ahmad Yonanda, Yonanda Unjuk Kerja Termal dan Elektrikal Kolektor Photovoltaic/Thermal (PV/T) Berdasarkan Ketebalan Sirip Absorber. Jurnal Mechanical. ISSN 2087-1880

Amrizal, Amrizal and Amrul, Amrul (2019) Pengaruh Variasi Temperatur Fluida Masuk Terhadap Unjuk Kerja Kolektor Surya Hybrid Pv/T. Jurnal Mechanical, 10 (2). ISSN 2460 1888

Amrizal, Amrizal and Amrul, Amrul Unjuk Kerja Kolektor Surya Pelat Datar Aliran Paralel. Mechanical Jurnal Ilmiah Teknik Mesin. ISSN 2087-1880

Amrizal, Amrizal and Amrul, Amrul and Christian, Cahya Putra and Agung, Nugroho (2019) Pengaruh Variasi Temperatur Fluida Masuk Terhadap Unjuk Kerja Kolektor Surya Hybrid Pv/T. Mechanical Jurnal Ilmiah Teknik Mesin, 10 (2). ISSN 2087-1880

Amrizal, Amrizal and Amrul, Amrul and Herry, Wardono and Ahmad Yonanda, Yonanda Simulasi unjuk kerjakolektor surya PV/T berdasarkan bentuk penampang pipa absorber. Journal of Science and Applicative Technology.

Amrizal, Amrizal and Amrul, Amrul and Muhammad, Irsyad Performance Analysis of PV/T-TEC Collector for The Tropical Climate Conditions of Indonesia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences.

Amrizal, Amrizal and Yandi, P and Muhammad, Irsyad Performance comparison of single and double pass PV/T solar collectors integrated with rectangular plate fin absorber. IOP Conference Series: Materials Science and Engineering.

Amrul, Amrul The Influence of Municipal Solid Waste Components Composition on Main Parameters of Torrefaction to Produce High-Calorie Solid Fuel. Proceedings of the 5 International Conference on Cooling and Heating Technologies 2010. ISSN ISSN 0854 – 9346

Amrul, Amrul Studi Awal Kelayakan Ekonomi Pabrik Torefaksi Sampah Perkotaan Menjadi Bahan Bakar Padat Setara Batubara Skala Pilot Berkapasitas 25 Ton per Jam. Proceedings Seminar Nasional Energi Terbarukan dan Produksi Bersih 2012. ISSN ISSN: 0016087403

Amrul, Amrul A Study on Indonesian Municipal Solid Waste Potential for High Calorific Solid Fuel by Torrefaction Process. Proceedings of the International Conference on Fluid and Thermal Energy Conversion 2009. ISSN ISSN 0854 – 9346

Amrul, Amrul and Amrizal, Amrizal "Rancang Bangun dan Analsis Unjuk Kerja Reaktor Torefaksi Kontinu Tipe Tubular Dengan Sistem Pemanas Oil Jacket Terhadap Kinerja Turbin Cross-flow". Mechanical.

Amrul, Amrul and Amrizal, Amrizal Studi Eksperimental Sudut Nosel Dan Sudut Sudu Terhadap Kinerja Turbin Cross-flow. Mechanical Jurnal Ilmiah Teknik Mesin. ISSN 2087-1880

Amrul, Amrul and Muhammad, Fariz and Indra Mamad, Gandidi SIMULASI TERMAL REAKTOR TOREFAKSI KONTINU TIPE TUBULAR UNTUK PRODUKSI BAHAN BAKAR PADAT DARI SAMPAH KOTA. Prosiding Seminar Nasional Tahunan Teknik Mesin XVI tahun 2017. (In Press)

Andriyanto, Andriyanto and Muhammad, Irsyad and Agus, Sugiri and Amrizal, Amrizal Thermal Energy Storage Characteristics of Paraffin in Solar Water Heating Systems with Flat Plate Collectors. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences.

Angga, Darma P and Amrizal, Amrizal and Gusri, Akhyar Geometry Optimization of PV/T-TEG Collector under Different Operating Conditions Using CFD Simulation and Taguchi Method. ENGINEERING JOURNAL.

Ani, Handayani and Adi, Cifriadi and Aniek, Handayani and Muhammad, Chalid and Shirley, Savetlana and Marchel, Christwardana (2019) Effect of NR-g-cellulose coupling agent into NR-cellulose composite dispersibility and its physical properties. Materials Science and Engineering, 703. pp. 1-7.

Asep, Hermanto` and Yanuar, Burhanuddin and Irza, Sukmana (2016) Peluang dan tantangan aplikasi baut tulang mampu terdegradasi berbasis logam magnesium. Dinamika Teknik Mesin, 6 (2). pp. 93-98. ISSN 2502-1729

Badaruddin, Mohammad (2023) Effect of single and double quenching-tempering heat treatments on microstructures and tensile strength of AISI 4140 in annealing condition. AIP Conference Proceedings.

Badaruddin, Mohammad (2023) Increased toughness and low cycle fatigue in ASSAB 709 m steel through normalizing process. AIP Conference Proceedings 2689, 070044 (2023).

Badaruddin, Mohammad (2020) Similarity check result for An_experimental_investigation_of_the_mechanical_st. Construction and Building Materials, 232 (3). p. 117193. ISSN 0950-0618 (Unpublished)

Badaruddin, Mohammad and Akbari, Rizki and Harnowo, Supriadi (2019) Increasing of mild steel ST 41 grade hardness by carburizing treatment using an active carbon from coconut shell and CaCO3 catalyst from chicken eggshell. Prosiding SNTTM XVIII, 1 (1). pp. 1-6. ISSN 2623-0313

Badaruddin, Mohammad and Bakti, Bima and Prasetya, Budi and Sugiyanto, Sugiyanto (2021) Effect of austempering temperatures on surface hardness of AISI 4140 steel. IOP Conf. Series: Materials Science and Engineering, 1173 (1). pp. 1-7. ISSN 1757-899X

Badaruddin, Mohammad and Chaur, Jeng Wang and Herry, Wardono and Dwi, Asmi (2018) High temperature oxidation of low carbon steel with and without an Al coating in an atmosphere containing burning ethanol. AIP Conference Proceedings, 1983 (1063). 050002-1-050002-7. ISSN 978-0-7354-1699-4

Badaruddin, Mohammad and Chaur, Jeng Wang and Tarkono, Tarkono and Wardono, Herry and Asmi, Dwi (2016) High-temperature oxidation behavior of aluminized AISI 4130 steel. AIP Conference Proceedings, 1711 (040002). pp. 1-6. ISSN 0094-243X

Badaruddin, Mohammad and Kuncoro, Purnadi Sri and Suudi, Ahmad and Sugiyanto, Sugiyanto (2018) Low Cycle Fatigue Analysis of an Annealed AISI 4140 Steel. Seminar Nasional Tahunan Teknik Mesin 2018, 18. pp. 56-61. ISSN 2623-0313

Badaruddin, Mohammad and Kurniawan, Rio Dicki and Sugiyanto, Sugiyanto and Pambudi, Ambar (2020) IOP Conference Series: Materials Science and EngineeringPAPER • OPEN ACCESSLow Cycle Fatigue Properties of Aluminizing Coating on Cold-DrawnAISI 1018 Steel. Materials Science and Engineering,, 807. 012019. ISSN 1757-899X

Badaruddin, Mohammad and Risano, A.Yudi Eka and Wardono, Herry and Asmi, Dwi (2017) Hot-Corrosion of AISI 1020 Steel in a Molten NaCl/Na2SO4 Eutectic at 700°C. AIP Conference Proceedings, 1788. pp. 1-9. ISSN 978-0-7354-1452-5

Badaruddin, Mohammad and Risano, A.Yudi Eka and Wardono, Herry and Asmi, Dwi Hot-corrosion of AISI 1020 steel in a molten NaCl/Na2SO4 eutectic at 700°C. Hot-corrosion of AISI 1020 steel in a molten NaCl/Na2SO4 eutectic at 700°C, 1788 (1). 030066-1-030066-9. ISSN AIP Conference Proceedings 1788, 030066 (2017)

Badaruddin, Mohammad and Sugiri, Agus and Wang, Chaur Chaur (2020) An experimental investigation of the mechanical strength of cold-drawn AISI 1018 steel under high-temperature steady- and transient-state conditions. Construction and Bulding Materials, 232. p. 117193. ISSN 0950-0618

Badaruddin, Mohammad and Sugiyanto, Sugiyanto (2005) Efek Shot Peening Terhadap Korosi Retak Tegang (SCC) Baja Karbon Rendah dalam Lingkungan Air Laut. Jurnal Teknik Mesin, 7 (1). pp. 11-14. ISSN 1410-9867

Badaruddin, Mohammad and Sugiyanto, Sugiyanto (2020) Low Cycle Fatigue Properties of Aluminizing Coating on Cold- Drawn AISI 1018 Steel. IOP Conference Series: Materials Science and Engineering.

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Asmi, Dwi (2019) High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. Bulletin of Materials Science, 43 (1). 0-11. ISSN 0973-7669

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Asmi, Dwi (2020) High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. Bulletin of Materials Science volume, 43. p. 11. ISSN 0973-7669

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Asmi, Dwi (2019) The resistance of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850°C. Materials Research Express, 6 (8). pp. 1-8. ISSN 2053-1591

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Herry, Wardono Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. International Journal of Fatigue, 125. ISSN 406–417

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Herry, Wardono and Andoko, Andoko and Chaur, Jeng Wang and Abu, Khalid Rivai (2019) Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. andoko.ft@um.ac.id, 125. pp. 406-417. ISSN 0142-1123

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Herry, Wardono and Andoko, Andoko and Chaur, Jeng Wang and Rivai, Abu Khalid (2019) Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. International Journal of Fatigue, 125. pp. 406-417. ISSN 0142-1123

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Suudi, Ahmad (2013) Hot Corrosion of Aluminized 1020 Steel with NaCl Deposit. Advanced Materials Research, 789. pp. 463-466. ISSN 1662-8985

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Suudi, Ahmad (2012) Influence of water-vapor on the isothermal oxidation behavior of aluminized AISI 1020 steel at elevated temperatures. Procedia Engineering, 50. pp. 649-657. ISSN 1877-7058

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Wardono, Herry and Andoko, Andoko and Wang, Chaur Chaur and Rivai, Abu Khalid (2019) Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. International Journal of Fatigue, 125. pp. 406-417. ISSN 0142-1123

Badaruddin, Mohammad and Suharno, Suharno and Wijaya, Hanif Ari (2014) Isothermal Oxidation Behavior of Aluminized AISI 1020 Steel at the Temperature of 700 oC. Jurnal Teknik Mesin-Universitas Kristen Petra, 15 (1). pp. 15-19. ISSN 1410-9867

Badaruddin, Mohammad and Suudi, Ahmad (2011) Effect of Prestrain on Delayed Fracture of Stainless Steel 304. Jurnal Teknik Mesin ITS, 11 (3). pp. 173-179. ISSN 1411-9471

Badaruddin, Mohammad and Tomi, Riza and Zulhanif, zulhanif (2018) The effect of diffusion treatment on the mechanical properties of hot-dip aluminum coating on AISI P20 steel. AIP Conference Proceedings, 1983. 050004-1. ISSN 978-0-7354-1699-4

Badaruddin, Mohammad and Wang, Chaur Chaur and Saputra, Yudhistyra and Khalil, Abdul Rouf Amarulloh High Temperature Corrosion of Aluminized AISI 4130 Steel with the Different Composition of NaCl/Na2SO4 Deposits. Makara Journal of Technology, 19 (2). pp. 45-50. ISSN 2355-2786

Badaruddin, Mohammad and Wardono, Herry and Zulhanif, zulhanif and Supriadi, Harnowo and Salimor, Mario (2020) Experimental investigation of mechanical properties of cold-drawn AISI 1018 steel at high-temperature steady-state conditions. Journal of Materials Research and Technology, 9 (1). pp. 1-12. ISSN 2238-7854

Badaruddin, Mohammad and Yudi Eka Rosano, Ahmad and Suudi, Ahmad (2017) Peningkatan Efisiensi Termal Tungku Biomasa Untuk Proses Pengeringan Biji Kakao di Desa Wiyono Kabupaten Pesawaran Propinsi Lampung. Jurnal Sakai Sambayan, 11 (1). pp. 1-10. ISSN 2550-1089

Badaruddin, Mohammad and zulhanif, Zulhanif and Supriadi, Harnowo (2019) Low Cycle Fatigue Properties of Extruded 6061-T6 Aluminum Alloy. Journal of Physics: Conference Series, 1198 (3). pp. 1-6. ISSN 1742-6596 (In Press)

Badaruddin, Mohammmad and Sugiyanto, Sugiyanto (2005) Efek Shot Peening Terhadap Korosi Retak Tegang (SCC) Baja Karbon Rendah dalam Lingkungan Air Laut. Jurnal Teknik Mesin, Jurnal Keilmuaan dan Terapan Teknik Mesin, 7 (1). pp. 11-14. ISSN 1410-9867

Bonar, Asybel and Pasek, Ari Darmawan and harmen, harmen (2021) Design and performance analysis of 1KW ORC turboexpander with R245fa as working fluid. IOP Conference Series: Materials Science and Engineering, 1109 (012049). pp. 1-10.

Budiyanto, Prasetyo and Zulhendri, Zulhendri and Akmal, Jamiatul and Tanti, Novri and Suudi, Ahmad (2019) Perancangan mesin penghancur sekam padi dengan poros penggerak horisontal. Jurnal Teknik Mesin Indonesia, 14 (2). p. 37. ISSN 1907-350X

Burhanuddin, Yanuar (2003) Analisis ketelitian pemosisian machining center dengan sistem pengukuran ketelitian mesin perkakas berbasis laser interferometer. Jurnal Poros, 6 (4). pp. 249-259. ISSN 1410-6841

Burhanuddin, Yanuar (2018) Studi Sifat Mekanik Magnesium AZ31 Hasil Proses Pengecoran Tekan (Squeeze Casting). Jurnal Energi dan Manufaktur, 11 (1). pp. 1-5. ISSN 2541-5328

Burhanuddin, Yanuar and Che Haron, C.H and Ghani, J. A. and Ariffin, A.K and Ibrahim, G.A and Yasir, A. and El-Maghribi, N.H. (2008) The Effects of CBN Cutting Tool Grades on the Tool Life and Wear Mechanism When Dry Turning of Titanium Alloy. Asian International Journal of Science and Technology in Production and Manufacturing Engineering, 1 (2). pp. 105-110. ISSN 1906-151X

Burhanuddin, Yanuar and Wakhid, Nur and Sukmana, Irza and Tarkono, Tarkono and Yudi Eka Rosano, Ahmad (2018) Planning and Heating Analysis of Squeeze Casting Die Devices for Preparation of Basic Materials for Magnesium AZ31 Bone Bolts. Prosiding Seminar Nasional Tahunan Teknik Mesin (SNTTM) ke 17. pp. 124-130. ISSN 2623-0313

Chatarina, Niken and Putra, Sasana and Karami, Muhammad (2020) Deep-hair-cracks mechanism of rigid pavement in humid tropical weather. IOP Conference Series: Materials Science and Engineering, 857 (012028). pp. 1-6. ISSN 1757-899X

Chen, Shaoyi and Morita, Akihiro and Sukmana, Irza and Maeda, Eijiro and Ohashi, Tohsiro (2015) Development of Fibrin Gel-Microgroove Model For Microvascularization by Endothelial Cells. Bioreheology, 9 (1). pp. 19-23. ISSN 1867-0466 (Print) 1867-0474 (Online)

Christwardana, Marcelinus and Handayani, Aniek Sri and Savetlana, Shirley and Lumingkewas, Riana Herlina and chalid, Mochamad Micro-Fibrillated Cellulose Fabrication from Empty Fruit Bunches of Oil Palm. Material Science Forum.

Dwiastanto, L. Patria Giri and Burhanuddin, Yanuar and Ibrahim, Gusri (2020) Optimasi nilai keausan pahat dan kekasaran permukaan benda kerja terhadap parameter pemesinan milling dengan benda kerja magnesium menggunakan kombinasi metode taguchi dan grey relational analysis. JURNAL TURBO, 9 (1). pp. 6-17. ISSN 2477-250X

E, Surojo and J, Anindito and F, Paundra: and A. R, Prabowo and E. P, Budiana and N, Muhayat and Mohammad, Badaruddin and Triyono, Triyono (2021) Effect of water flow and depth on fatigue crack growth rate of underwater wet welded low carbon steel SS400. Open Engineering, 11 (1). pp. 329-338. ISSN 2391-5439

Eka Risano, A. Yudi and Susila E.S., M. Dyan and Pratama, Yoga (2017) APLIKASI MINYAK KELAPA SAWIT PADA PHOTOVOLTAIC YANG TERINTEGRASI PADA DINDING BANGUNAN SEBAGAI PENDINGIN PASIF UNTUK MENINGKATKAN EFISIENSI DAN MENURUNKAN BEBAN PENDINGIN RUANGAN. TURBO, 6 (1). pp. 1-7. ISSN p-ISSN: 2301-6663, e-ISSN: 2477-250X

Eka Risano, A. Yudi and Tanti, Novri and Efendi, Maulana (2017) PERANCANGAN ULANG ALAT PENGERING BIJI KAKAO TIPE ROTARI SEDERHANA PADA USAHA MANDIRI DI DESA WIYONO KABUPATEN PESAWARAN. TURBO, 6 (2). pp. 150-158. ISSN p-ISSN: 2301-6663, e-ISSN: 2477-250X

Fadli, Dian and Irsyad, Muhammad and Susila, M Dyan (2013) Kaji Eksperimental Sistem Penyimpanan Biogas Dengan Metode Pengkompresian Dan Pendinginan Pada Tabung Gas Sebagai Bahan Bakar Pengganti Gas LPG. FEMA Jurnal Ilmiah Teknik Mesin, 1 (4). ISSN 2337-4780

Fauzi, Bagus Muhammad and Sukmana, Irza and Burhanuddin, Yanuar (2020) Initial Design of Forging Measuring Instrument for Application of Friction Welding. JIT Journal of Innovation and Technology, 1 (1). pp. 11-14. ISSN 2721-8562

Gandidi, Indra Mamad (2016) Thermal – Catalytic Cracking of Real MSW into Bio Crude Oil. The Journal of Energy Institute. ISSN 1743-9671

Gandidi, Indra Mamad and Susila, M Dyan and Mustofa, Ali and Pambudi, Nugroho Agung Thermal - Catalytic Cracking of Real MSW into Bio Crude Oil. Journal of the Energy Institute. ISSN 1743-9671

Gandidi, Indra Mamad and Susila, M Dyan and Putra, R. Cahaya (2012) Studi Aplikasi Bio-dryer untuk Meningkatkan Produktivitas, Kualitas dan Pendapatan Petani Onggok. Seminar Nasional Energi Terbarukan dan Energi Bersih 2012. pp. 260-266. ISSN ISBN 978-979-8510-49-6

Gandidi, Indra Mamad and Susila, M Dyan and Rustamaji, Heri (2018) Effect of natural zeolite and kaolin as a catalyst in the isothermal-catalytic cracking of real municipal solid waste (MSW) for bio-oil production. IOP Conference Series: Earth and Environmental Science, 160 (012018). pp. 1-9. ISSN doi :10.1088/1755-1315/160/1/012018

Gusri, Akhyar and Arinal, Hamni (2019) Optimasi Kepresisian Geometri Ulir Menggunakan Metode Taguchi-Grey Relation Analysis. Jurnal Mechanical, 10 (2). pp. 54-60. ISSN 2087-1880

Gusri, Akhyar and Arinal, Hamni (2019) Pembuatan dan Pengujian Mesin Pemotong Lidi Tusuk Sate. JURNAL PENGABDIAN PADA MASYARAKAT, 4 (4). pp. 421-430. ISSN 2540-8747

Gusri, Akhyar and Arinal, Hamni (2019) Pengaruh Parameter Pemotongan Pada Proses Bubut Ulir (Threading) Terhadap Kepresisian Geometri Ulir Magnesium Paduan AZ31. Jurnal Energi dan Manufaktur. ISSN 2302-5255

Gusri, Akhyar and Arinal, Hamni and Afriani, Lusmeilia and Mita, Rilyanti (2017) PEMBERDAYAAN KARANG TARUNA MELALUI PENGELOLAAN SAMPAH MENJADI PUPUK KOMPOS ORGANIK Di DESA SIDOMULYO. SEMNAS IIB DARMAJAYA, 1 (1). pp. 11-25. ISSN 2598 – 0246

Gusri, Akhyar and Suryadiwansa, Harun (2019) Kekasaran permukaan pada pemesinan frais mikro Ti 6Al- 4V ELI (extra low intertitial). TURBO, 8 (2). pp. 201-207. ISSN p-ISSN: 2301-6663, e-ISSN: 2477-250X

Hani, handayani and Adi, Cifriadi and Aniek, Handayani and Mochammad, Chalid and Riana, Herlina and shirley, savetlana (2018) SINTESIS DAN KARAKTERISASI KOMPOSIT KARET ALAM/SELULOSA DENGAN VARIASI JENIS SELULOSA. Jurnal Penelitian karet, 36 (2). pp. 173-182. ISSN 2503-0469

Haryanto, Agus and Suharyadi, Suharyadi and Lanya, Budianto (2017) Pemanfaatan Air Tanah Dangkal untuk Irigasi Padi Menggunakan Pompa Berbahan Bakar LPG. Jurnal Keteknikan Pertanian (JTEP), 5 (3). pp. 219-226. ISSN 2407-0475

Hendronursito, Yusup and Sukmana, Irza and Risano, A.Yudi Eka (2021) Study of the potential utilization of local Lampung Province resources in development of dental implant bioceramics. IOP Conf. Series: Materials Science and Engineering, 1173 (012026). ISSN 1757-899X

Herry, Wardono and Yudi Eka Rosano, Ahmad (2018) PEMANFAATAN CAMPURAN ZEOLIT DAN FLY ASH BATUBARAYANG TELAH DIAKTIVASI FISIK TERHADAP AKSELERASI MESIN SEPEDA MOTOR 4-LANGKAH. JURNAL TURBO, 7 (1). pp. 81-86. ISSN 2477-250X

Ibrahim, G.A and Hamni, A and Iskandar, J and Puji Lestari, S.M (2017) Analisa Keausan Pahat pada Pemesinan Bor Magnesium AZ31 Menggunakan Metode Taguchi. Jurnal Mechanical, 8 (2). pp. 71-78. ISSN 2460 1888

Ibrahim, Gusri and Arinal, Hamni and Suryadiwansa, Harun and Yanuar, Burhanuddin (2018) The machined surface of magnesium AZ31 after rotary turning at air cooling condition. IOP Conference Series: Materials Science and Engineering.

Ibrahim, Gusri and Bagus, Purnomo and Arinal, Hamni and Suryadiwansa, Harun and Yanuar, Burhanuddin (2018) The machined surface of magnesium AZ31 after rotary turning at air cooling condition. Materials Science and Engineering, 344 (012004). pp. 1-10. ISSN 1757-899X

Ibrahim, Gusri and Hamni, Arinal (2019) ANALISIS KEKASARAN PERMUKAAN DAN KEBULATAN PADA PEMESINAN DRILL PADUAN MAGNESIUM MENGGUNAKAN METODE TAGUCHI. Machine; Jurnal Teknik Mesin Vol. 5 No. 1, April 2019.

Ibrahim, Gusri and Hamni, Arinal and Burhanuddin, Yanuar and Panuju, Yahya and Ar Rafi, Sahid and Ramadhan, Rizki (2022) Failure Analysis of The Flour Press Machine and Alternative Solutions at PT Aneka Usaha Laba Jaya Utama Pesawaran. Indonesian Journal of Engineering and Science, 3 (3). pp. 39-47. ISSN 2774-373X

Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method.

Ibrahim, Gusri and Panuju, Yahya and Saputra, Robby (2018) Efek Pelumasan Metode Minimum Quantity Lubrication (MQL) terhadap Kualitas Permukaan Benda Kerja Magnesium. JURNAL TURBO, 7 (2). pp. 133-139. ISSN 2477-250X

Ibrahim, Gusri and Tarkono, Tarkono and Panuju, Yahya (2012) Umur Pahat dan Kekasaran Permukaan Sewaktu Pemesinan Ti-6% Al-4% V ELI pada Kecepatan Tinggi. Prosiding Seminar Nasional Energi Terbarukan dan Produksi Bersih 2012. ISSN 978-979-8510-49-6

Ibrahim, Gusri and Yanuar, Burhanuddin and Arinal, Hamni and Suryadiwansa, Harun (2023) PERANCANGAN PAHAT ULIR KORTIKAL MENGGUNAKAN METODE REVERSE ENGINEERING. AME (Aplikasi Mekanika dan Energi):, 9 (2). pp. 109-114. ISSN 2460 3988

Ibrahim, Gusri Akhyar and Dhika, Arifian and Arinal, Hamni and Suryadiwansa, Harun and Yanuar, Burhanuddin ANALISA KEAUSAN PAHAT PUTAR PADA PEMBUBUTAN MAGNESIUM AZ31 MENGGUNAKAN UDARA DINGIN BERTEKANAN. Prosiding Seminar Nasional Teknik Mesin Indonesia di ITS.

Ibrahim, Gusri Akhyar and Hamni, Arinal and Bagus, Purnomo and Suryadiwansa, Harun and Yanuar, Burhanuddin The Machined Surface of Magnesium AZ31 After Rotary Turning at Air Cooling Condition. The Machined Surface of Magnesium AZ31 After Rotary Turning at Air Cooling Condition.

Ignatius, Gian Roni and Sugiri, Agus and Suudi, Ahmad (2020) Perancangan dan Perhitungan Sudu Turbin Angin Horisontal NACA 4412 Variasi Sudut Serang Menggunakan Simulasi BEM. Jurnal Ilmiah Teknik Mesin, 8 (2). pp. 34-37. ISSN 2337 4780

Indra Mamad, Gandidi A Comparison of Activated Natural Zeolite and Kaolin as a Catalyst in the Isothermal-Catalytic Cracking of Real MSW to Produce Bio-Oil. Journal of IOP Conferences Series: Earth and Environmental Science, - (-). pp. 1-8. ISSN 1755-1307 (In Press)

Indra Mamad, Gandidi Effect of natural zeolite and kaolin as a catalyst in the isothermal-catalytic cracking of real municipal solid waste (MSW) for bio-oil production. Journal of IOP Conferences Series: Earth and Environmental Science. ISSN 1755-1307 (In Press)

Indra Mamad, Gandidi and Purnawan, Purnawan and Amrul, Amrul (2020) PYROLYTIC LIQUID FUEL FROM RMSW USING LONG CATALYZER DOWNSTREAM IN STAGE PYROLYSIS. International Journal of Advanced Science and Technology, 29 (6s). pp. 77-82. ISSN 2005-4238 IJAST

Irsyad, Muhammad and Amrizal, Amrizal and Yulian, Aji Muhammad and Susila, M Dyan KARAKTERISTIK PERPINDAHAN PANAS ALAT PENUKAR KALOR TIPE STAGGERED FINS BERISI MATERIAL FASA BERUBAH DARI MINYAK KELAPA PADA PROSES PEMBEKUAN. Rekayasa Mesin, 11 (2). pp. 159-164. ISSN eISSN 2477-6041

Irsyad, Muhammad and Anam, Khoiril and Risano, A.Yudi Eka and Amrul, Amrul (2021) PENGGUNAAN MATERIAL FASA BERUBAH UNTUK MENJAGA KESEGARAN IKAN. Teknologi, 13 (2). pp. 153-159. ISSN 2460-0288

Irsyad, Muhammad and Indartono, Yuli Setyo and Pasek, Ari Darmawan and Adriansyah, Willy (2017) Experimental Study on Flow Characters of Salt Hydrate Slurry in Phase Change Temperature Range. Engineering Journal, 21 (5). pp. 15-23. ISSN 0125-8281

Irsyad, Muhammad and Pasek, Ari Darmawan and Indartono, Yuli Setyo (2017) An Investigation of Green Roof Deployment in Bandung City, Indonesia. Journal of Engineering and Applied Sciences, 11 (11). pp. 2528-2534. ISSN 1818-7803

Irsyad, Muhammad and Pasek, Ari Darmawan and Indartono, Yuli Setyo and Adriansyah, Willy (2018) An Investigation on Heat Transfer Characteristics of Salt Hydrate at Melting Temperature Range. International Journal of Air-Conditioning and Refrigeration. ISSN 2010-1333 (Submitted)

Irsyad, Muhammad and Pasek, Ari Darmawan and Indartono, Yuli Setyo and Pratomo, Adi Widya (2017) Heat transfer characteristics of building walls using phase change material. IOP Conf. Series: Earth and Environmental Science, 60 (012028). pp. 1-6. ISSN 1755-1315

Irsyad, Muhammad and Pasek, Ari Darmawan and Indartono, Yuli Setyo and Suwono, Aryadi and Pradipta, Muhammad Akbar (2017) Phase Change Materials Development from Salt Hydrate for Application as Secondary Refrigerant in Air Conditioning System. Science and Technology for the Built Environment, - (-). pp. 1-7. ISSN 2374-4731 (Print) 2374-474X (Online)

Irsyad, Muhammad and Susila, M Dyan and Amrizal, Amrizal and Amrul, Amrul and Akmal, Mardho (2020) Heat Transfer Characteristics of Paraffin in Staggered Fins Heat Exchanger for the Cooling Process to Room Cooling Applications. IOP Conference Series: Earth and Environmental Science, 520 (1). pp. 1-6. ISSN 1755-1315

Irsyad, Muhammad and Suwono, Aryadi and Indartono, Yuli Setyo and Pasek, Ari Darmawan and Pradipta, Muhammad Akbar (2018) Phase change materials development from salt hydrate for application as secondary refrigerant in air-conditioning systems. Seceince and Technology for the Built Environment, 24 (1). pp. 90-96. ISSN 2374-474X/ 2374-4731

Irsyad, Muhammad and Tobing, N.A.H.L and Susila, M Dyan (2020) Pemanfaatan material fasa berubah untuk mempertahankan kesegaran sayuran. TURBO, 9 (2). ISSN p-ISSN: 2301-6663, e-ISSN: 2477-250X

Irsyad, Muhammad and harmen, harmen (2017) Heat transfer characteristics of coconut oil as phase change material to room cooling application. IOP Conf. Series: Earth and Environmental Science, 60. pp. 1-6. ISSN 1755-1315

Irza, Sukmana (2021) Corrosion of porous Mg and Fe scaffolds: a review of mechanical and biocompatibility responses. The International Journal of Corrosion Processes and Corrosion Control, 56 (4). pp. 310-326. ISSN 1478422X

Irza, Sukmana (2016) ELECTROSPUN-BASED FIBROUS SCAFFOLD FOR CARDIOVASCULAR ENGINEERING APPLICATIONS: A REVIEW. ARPN Journal of Engineering and Applied Sciences, 11 (7). pp. 4778-4781. ISSN 1819-6608

Irza, Sukmana The Improvement of Paclitaxel Cytotoxicity using Nanocellulose based Nature Resources. Journal of Engineering and Scientific Research (JESR), 1 (1). pp. 7-11. ISSN pISSN: 2685-0338; eISSN: 2685-1695

Irza, Sukmana (2019) PENGARUH KECEPATAN TOOL PADA DISSIMILAR METAL ALUMINIUM 1100 DAN 5052 TERHADAP KUALITAS HASIL PENGELASAN DENGAN METODE LAS GESEK PUNTIR (FRICTION STIR WELDING). Machine; Jurnal Teknik Mesin Vol. 5 No. 1, Agustus 2019, 5 (1). pp. 1-7. ISSN 2581-0138

Irza, Sukmana (2020) PENGARUH KECEPATAN TOOL PADA DISSIMILAR METAL ALUMINIUM 1100 DAN 5052 TERHADAP KUALITAS HASIL PENGELASAN DENGAN METODE LAS GESEK PUNTIR (FRICTION STIR WELDING). Machine; Jurnal Teknik Mesin Vol. 6 No. 2,Oktober 2020, 6 (2). pp. 1-7. ISSN 2581-0138

Irza, Sukmana and Hendriyanto, Agus and Savetlana, Shirley and Tarkono, Tarkono (2018) The effect of sintering parameter on the properties of hydroxyapatite from local limestone for bone implant application. AIP Conference Proceedings, 1977 (1). 030039-1-030039-6. ISSN 0094-243X

Irza, Sukmana and shirley, savetlana and Yanuar, Burhanuddin and MA, Wicaksono and H, Nur (2020) Fabricating and Testing of Porous Magnesium Through Powder Metallurgy Technique using TWSH (Titanium Wire Space Holder) for Biodegradable Bone Scaffold Material. Journal of Engineering and Scientific Research (JESR), 1 (2). pp. 78-83. ISSN pISSN268-0338 ; eISSN 268-1695

Ishak, Siti Amirah and Djuansjah, Joy Riski Pangestu and Kadir, Mohammed Rafdiq Abdul and Sukmana, Irza (2014) Angiogenesis in tissue engineering: from concept to the vascularization of scaffold construct. IOP Conference Series: Materials Science and Engineering, 58 (1). pp. 1-6. ISSN 1757-899X

Ishak, Siti Amirah and Sukmana, Irza (2014) Modulation of Fibrin Gel Extracellular Matrix Properties by Fibrinogen and Thrombin Concentrations for Angiogenesis Assay. Advanced Materials Research., 911. pp. 342-346. ISSN 1662-8985

K, Pudyastuti and Harmen, Harmen and M, Djumantara and S, Fadhlurrahman (2019) Thermal characteristics of the X geothermal resources, and a recommendation on utilization possibility. Journal of Physics: Conference Series, 1402 (022057).

Kiswanto, Gandjar and Panuju, Yahya (2010) Development of Closed Bounded Volume (CBV) Grouping Method of Complex Faceted Model Through CBV Boundaries Identification. The 2nd International Conference on Computer and Automation Engineering 2010, 3. pp. 378-383. ISSN 978-1-4244-5586-7

Kurniawan, Tata and Wardono, Herry and Susila, M Dyan (2020) PENGARUH PEMANFAATAN FILTER UDARA BERBAHAN ZEOLIT TERAKTIVASI FISIK MENGGUNAKAN Microwave TERHADAP AKSELERASI SEPEDA MOTOR BENSIN 4-LANGKAH. FEMA Jurnal Ilmiah Teknik Mesin, 8 (2). pp. 1-5. ISSN 2337-4780

Lubis, Asnawi and Saragih, Rudolf S and Suudi, Ahmad (2010) A study of limit pressure of LPG 3kg tanks using finite element method. Proceeding SNTTM IX, 9 (-). pp. 149-154. ISSN 978-602-97742-0-7

Lubis, Asnawi and Savetlana, Shirley and Suudi, Ahmad (2013) PERILAKU STRESS TANKI TOROIDAL PENAMPANG OVAL DENGAN BEBAN INTERNAL PRESSURE. PROSIDING SEMINAR NASIONAL MESIN DAN INDUSTRI (SNMI8) 2013, 8. pp. 60-66. ISSN ISBN: 978-602-98109-2-9

Lubis, Asnawi and Suudi, Ahmad and Tanti, Novri (2012) Nonlinear finite element analysis of pressurized LPG toroidal tank with radial flush nozzle. Proceeding Seminar Nasional Tahunan Teknik Mesin (SNTTM) ke-11 dan Thermofluid IV, 1 (1). pp. 957-961. ISSN 2302-4542

Lubis, Asnawi and Tanti, Novri and Tambunan, Rizki Rian Toni (2018) Flexibility of S-Shaped Pipe Bends under Thermal and Mechanical Loads. Prosiding Seminar Nasional Tahunan Teknik Mesin (SNTTM) ke 17. PMT-19/112-117. ISSN 2623-0313

Mahardhika, Destarius and Lubis, Asnawi (2020) Kekuatan Geser dan Integritas Struktur Sambungan Fillet Weld pada Support Lug Bejana Tekan Silinder Vertikal. Jurnal Mechanical, 11 (2). pp. 62-68. ISSN 2087-1880

Mahardika, Destarius and Lubis, Asnawi and Akmal, Jamiatul (2008) Strength and structural integrity assessment of fillet weld attachment junction on cylindrical pressure vessels. AIP Conference Proceedings, 1977. 030030-1-030030-8. ISSN 0094-243X

Maindra, Maindra and harmen, harmen and Susila, M Dyan (2014) Studi Komparasi Dari Zat Aditif Sintetik Dengan Zat Aditif Alami Terhadap Pemakaian Bahan Bakar Dan Emisi Gas Buang Pada Mesin Genset Motor Bensin 4-Langkah. FEMA Jurnal Ilmiah Teknik Mesin, 2 (1). ISSN 2337-4780

Martin, Yul (2017) Audit Energi dan Analisis Peluang Penghematan Konsumsi Energi Listrik Pada Bangunan Gedung Di Universitas Lampung. Prosiding Seminar Nasional Energi dan Industri Manufaktur 2017. pp. 59-68. ISSN 978-602-5085-10-9

Martinus, Martinus and Haryanto, Agus and Triyono, Sugeng and Telaumbanua, Mareli (2020) Development of Teak Leaf Plate Molding Machine for Producing Plastic Alternative Products. Development of Teak Leaf Plate Molding Machine for Producing Plastic Alternative Products. (Submitted)

Martinus, Martinus and Susila, M Dyan and Budiyono, Martinus (2011) Analisis Fenomena Penampang Alir Vertical Axis Wind Turbine (VAWT) Tipe Heliks Terhadap Kecepatan Angin Sebagai Pembangkit Listrik Alternatif Berskala Rumah Tangga. Mechanical Jurnal Ilmiah Teknik Mesin, 2 (2). ISSN 2087-1880

Mitrakusuma, Windy H and Kamal, Samsul and Indarto, Indarto and Susila, M Dyan and Hermawan, Hermawan and Deendarlianto, Deendarlianto (2017) The dynamics of the water droplet impacting onto hot solid surfaces at medium Weber numbers. Heat and Mass Transfer, 53 (10). pp. 3085-3097. ISSN 1432-1181

Mohammad, Badaruddin and Ahmad, Yudi Eka Risano and Ahmad, Suudi (2017) Peningkatan Efisiensi Termal Tungku Biomasa untuk Proses Pengeringan Biji Kakao di Desa Wiyono Kabupaten Pesawaran Propinsi Lampung. SAKAI SAMBAYAN, 1 (1). pp. 1-10. ISSN e-ISSN 2550-1089

Mohammad, Badaruddin and Ahmad, Yudi Eka Risano and Herry, Wardono and Dwi, Asmi (2017) Hot-corrosion of AISI 1020 steel in a molten NaCl/Na2SO4 eutectic at 700°C. AIP Conf. Proc, 1788 (030066). 030066-1-030066-9. ISSN 978-0-7354-1452-5

Mohammad, Badaruddin and Chaur, Jeng Wang and Yudhistyra, Saputra and Abu, Khalid Rivai (2015) High Temperature Corrosion of Aluminized AISI 4130 Steel with the Different Composition of NaCl/Na2SO4 Deposits. Makara Journal of Technology, 2 (19). pp. 45-50. ISSN 2355-2786

Mohammad, Badaruddin and Raden Tommy, Riza and Zulhanif, zulhanif (2018) The effect of diffusion treatment on the mechanical properties of hot-dip aluminum coating on AISI P20 steel. DISRUPTIVE INNOVATION IN MECHANICAL ENGINEERING FOR INDUSTRY COMPETITIVENESS: Proceedings of the 3rd International Conference on Mechanical Engineering (ICOME 2017), 1983 (050004). pp. 1-6. ISSN 978-0-7354-1699-4

Mohammad, Badaruddin and Sugiyanto, Sugiyanto and Dwi, Asmi (2019) The resistance of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850 °C. Materials Research Express, 6.

Mohammad, Badaruddin and Suharno, Suharno and Hanif, Ari Wijaya (2014) Isothermal Oxidation Behavior of Aluminized AISI 1020 Steel at the Temperature of 700 oC. Jurnal Teknik Mesin, 15 (1). pp. 15-20. ISSN 1410-9867

Muhammad, Irsyad and Amrizal, Amrizal and Dyan, Susila HEAT TRANSFER CHARACTERISTICS OF COCONUT OIL AS PHASE CHANGE MATERIALS IN FREEZING PROCESS. International Journal on “Technical and Physical Problems of Engineering”.

Muhammad, Meizano Ardhi and Panuju, Yahya and Prayitno, Hadi and Pradipta, Rio Ariestia and ., Martinus and Akbar, Gustian Ilham (2021) Internet of Things Ultraviolet Sterilizer Receiver Box: How to Design and Construct? International Journal of Electronics and Communications System, 1 (2). ISSN ISSN: 2798-2610

Muhriyana, Ryan and Burhanuddin, Yanuar and Panuju, Yahya (2013) Aplikasi Rencana Pemotongan Plat Menggunakan Sistem Pakar. Jurnal Fresh Mechanical (FEMA), 1 (2). pp. 25-36. ISSN 2337 - 4780

Nafrizal, Nafrizal and Tarkono, Tarkono and Sugiyanto, Sugiyanto (2011) Analisis Uji Destructive Dan Non Destructive Terhadap Uji sambungan LasV-Tunggal Baja AISI 1045. Mechanical Jurnal Ilmiah Teknik Mesin, 2 (2). pp. 25-31. ISSN 2087-1880

Nugraha, Nurcahya and Akmal, Jamiatul and Lubis, Asnawi (2021) Analisis Dinamik Tabung Kontinu dengan Metode Beda Hingga. Jurnal Mechanical, 12 (2). pp. 57-64. ISSN 2087-1880

Nugraha, Nurcahya and Lubis, Asnawi and Su'udi, Ahmad (2019) Pengaruh Beban Thermal dan Mechanical Terhadap Perilaku Nonlinier Pipa Elbow Bertekanan. Jurnal Energi dan Manufaktur, 12 (2). ISSN 2541-5328

Nugraha, Nurcahya and Lubis, Asnawi and Suudi, Ahmad (2019) Perilaku Nonlinier Pipa Elbow Bertekanan dengan Beban Termal dan In-Plane Bending. Jurnal Energi dan Manufaktur, 12 (2). pp. 82-86. ISSN 2302-5255

Oktariawan, Imran and ., Martinus and ., Sugiyanto (2013) Pembuatan Sistem Otomasi Dispenser Menggunakan Mikrokontroler Arduino Mega 2560. Jurnal Ilmiah Teknik Mesin, 1 (2). ISSN 2337 4780

Paksi, Reza Mahesa and Suudi, Ahmad and Martinus, Martinus (2019) Smart lower limb prosthetic based on accelerometer and gyroscope sensor with arduino microcontroller. Jurnal Teknik Mesin Indonesia, 14 (1). pp. 5-9. ISSN 2597-7563.

Panjaitan, Budianto and Gunanti, - and Noviana, Deni and Ulum, Mokhamed Fakhrul and Sukmana, Irza (2014) PENGARUH IMPLANTASI POROUS TANTALUM BERLAPIS HIDROKSIAPATIT TERHADAP GAMBARAN DARAH MERAH TIKUS SPRAGUE DAWLEY. Jurnal Kedokteran Hewan., 8 (2). pp. 151-153. ISSN 1978 – 225X

Panuju, Yahya (2017) Analisis Fasilitas Wudhu Masjid di Bandar Lampung dari Tinjauan Ergonomis sebagai Bagian Peningkatan Kualitas Pelayanan Fasos Kota. Prosiding Seminar Nasional Energi dan Industri Manufaktur 2017. II.21-II.28. ISSN 978-602-5085-10-9

Panuju, Yahya (2013) Pembuatan Metode Penyusunan Pola untuk Optimasi Pemotongan Plat dengan Image Processing. Prosiding Seminar Hasil-Hasil Penelitian Universitas Lampung 2013. pp. 253-260. ISSN 978-979-8510-73-1

Panuju, Yahya and ., Martinus and Riszal, Akhmad and Kobayashi, Hideki (2022) Sustainable Design Implementation – Measuring Environmental Impact and User Responsibility. International Journal of Automation Technology, 16 (6). pp. 814-823. ISSN 1883-8022

Panuju, Yahya and Akbar, Gustian Ilham and Hamni, Arinal and Ibrahim, Gusri (2023) Analisis kebutuhan konsumen pada desain sterilizer receiver box dengan metode Quality Function Deployment (QFD). Mechanical Jurnal Ilmiah Teknik Mesin, 14 (2). ISSN 2087-1880

Panuju, Yahya and Martinus, Martinus and Akhmad Riszal, Riszal (2022) Sustainable Design Implementation – Measuring Environmental Impact and User Responsibility. International Journal of Automation Technology, 16 (6). pp. 814-823. ISSN 1883-8022

Panuju, Yahya and Martinus, Martinus and Hamni, Arinal and Tarkono, Tarkono (2022) Aplikasi Strategi Desain Ramah Lingkungan pada Produk Rumah Tangga: Modifikasi Produk Mesin Cuci 2 Tabung. Mechanical Jurnal Ilmiah Teknik Mesin, 13 (2). pp. 1-7. ISSN 2087-1880

Panuju, Yahya and Martinus, Martinus and Riszal, Akhmad (2022) Peningkatan kesadaran masyarakat Bandar Lampung untuk proses pencucian pakaian yang hemat air dengan pendekatan eco-feedback pada mesin cuci 2 tabung. Prosiding SENADIBA 2, 2. ISSN 2963-1378

Panuju, Yahya and Suudi, Ahmad and Ibrahim, Gusri (2021) Identifying Constraints Of Sustainable Product Development In Indonesia. International Journal of scientific and technology research, 10 (4). pp. 343-349. ISSN 2277-8616

Panuju, Yahya and Tanti, Novri and Kristiawan, Yohanes Pendeteksian Fitur Lubang Tembus pada Model 3D untuk Pembuatan Alur Pahat Pengeboran. Jurnal Mechanical, 3 (2). pp. 1-7. ISSN 2087-1880

Pasmadi, Dewa Anom and Lubis, Asnawi and Tanti, Novri and Hasymi, Zulhendri (2020) Kaji Eksperimental Peredam Dinamik dan Energy Harvesting pada Sistem Pegas Massa dengan DVA Tipe Dual Strip. Jurnal Mechanical, 11 (1). pp. 13-18. ISSN 2087-1880

Perwira, Cholyan and Burhanuddin, Yanuar and Panuju, Yahya (2014) Perencanaan Proses Tungku Pengering Kotoran Hewan Ternak. Jurnal Fresh Mechanical (FEMA), 2 (1). pp. 66-77. ISSN 2337 - 4780

Prabowo, Ardian and Sukmana, Irza and Burhanuddin, Yanuar (2017) Las Gesek (Friction Welding) Logam Tidak Sejenis (Dissimilar Metals) Magnesium AZ-31 Terhadap Aluminum AL-13. Industrial Research Workshop and National Seminar Politeknik Negeri Bandung, 8. pp. 248-251. ISSN 978 – 979 – 3541 – 55 - 6

Prayitno, Hadi and Prabowo, Angga D and Salsabillah, Angelia E and Khairudin, Rizal (2021) Initial Investigation of Heat Transfer Characteristics of Rotary Dryer with Finned Vacuum Chamber System. Open Science and Technology, 01 (01). pp. 121-129. ISSN 2776-1681

Purbowaskito, Widagdo and Telaumbanua, Mareli (2019) Simulation Study of Kalman-Bucy filter Based Optimal Yaw Rate Control System for Autonomous Tractor. Simulation Study of Kalman-Bucy filter Based Optimal Yaw Rate Control System for Autonomous Tractor, 355 (2019). pp. 1-8.

Putra, Dimas and Martinus, Martinus and Panuju, Yahya (2014) Pembuatan Sistem Robotika sebagai Implementasi Pergerakan Kamera secara Autonomous. Jurnal Fresh Mechanical (FEMA), 2 (2). pp. 23-30. ISSN 2337 - 4780

Ramdan, Mohd. and Sukmana, Irza (2017) ADVANCED BIOREACTOR SYSTEM FOR THE IMPLANTABLE BIOMATERIALS TESTING AND TISSUE ENGINEERING APPLICATIONS. ARPN Journal of Agricultural and Biological Science. ISSN 1990-6145

Ramdan, Mohd. and Sukmana, Irza (2014) Three-Dimensional Dynamic Bioreactor Culture System Supports the Angiogenesis Directional of Human Umbilical Vein Endothelial Cells. Advanced Science, Engineering and Medicine., 6 (1). pp. 97-99. ISSN ( Print ) : 2164 - 6627 ( Online ) : 2164 - 6635

Ramdan, Mohd. and Sukmana, Irza and Syazana, Nur and Jasmawati, Noor and Rafiq, Mohammed and Syahrom, Ardiyansyah (2017) THREE-DIMENSIONAL ADVANCE DYNAMIC CULTURE SYSTEM PROMOTES MICROVESSEL DEVELOPMENT FROM CULTURED ENDOTHELIAL CELLS IN VITRO. ARPN Journal of Engineering and Applied Sciences, 12 (2). pp. 371-376. ISSN 1819-6608

Rapa'i, Ahmad and Sinaga, Jorfri Boike and Susila, M Dyan (2014) Kajian Eksperimental Pengaruh Panjang Chord Sudu Terhadap Unjuk Kerja Turbin Helik Untuk Sistem Pembangkit Listrik Tenaga Mikrohidro (PLTMH). FEMA Jurnal Ilmiah Teknik Mesin, 2 (2). ISSN 2337-4780

Rashidi, NS and Sukmana, Irza and Mataram, Agung and Jawmawati, Noor (2018) SURFACE TREATED AND FIBRIN COATED ELECTROSPUN POLYACRYLONITRILE FIBER FOR ENDOTHELIAL CELL GROWTH AND PROLIFERATION. FACTA UNIVERSITATIS, 2018 (3). pp. 1-13. ISSN 2335-0164 (Online)

Renardy, B. Niko and Wardono, Herry and Susila, M Dyan (2020) Aktifasi Campuran Zeolit Alam Dan Flyash Batubara Menggunakan Microwave Sebagai Filter Udara Untuk Meningkatkan Akselerasi Mesin Sepeda Motor Bensin 4-Langkah. FEMA Jurnal Ilmiah Teknik Mesin, 8 (2). pp. 25-28. ISSN 2337-4780

Risano, A.Yudi Eka and Sinaga, Jorfri Boike and Susila, M Dyan and Irawan, Dwi (2019) PELATIHAN PEMBUATAN ALAT KOMPRESOR UDARA MINI PADA SEPEDA MOTOR SEBAGAI ALAT BANTU PENAMBAH UDARA PADA BAN BAGI GURU-GURU DAN KARYAWAN PONDOK PESANTREN NURUL IMAN DESA PURWOREJO KECAMATAN NEGERI KATON KABUPATEN PESAWARAN. PROSIDING SENAPATI SEMINAR NASIONAL PENGABDIAN KEPADA MASYARAKAT TEKNOLOGI DAN INOVASI Pengabdian Masyarakat di Era Revolusi Industri 4.0 dan Society 5.0, 1. pp. 135-139. ISSN 2685-0427

Risano, A.Yudi Eka and Susila, M Dyan and Pratama, Yoga (2017) APLIKASI MINYAK KELAPA SAWIT PADA PHOTOVOLTAIC YANG TERINTEGRASI PADA DINDING BANGUNAN SEBAGAI PENDINGIN PASIF UNTUK MENINGKATKAN EFISIENSI DAN MENURUNKAN BEBAN PENDINGIN RUANGAN. TURBO, 6 (1). pp. 1-7. ISSN p-ISSN: 2301-6663, e-ISSN: 2477-250X

Riszal, Akhmad and Martinus, Martinus (2021) Analisis Drag Force dan Aliran Fluida pada Desain Mobil Listrik Green Campus UNILA Berdasarkan Kecepatan. Open Science and Technology, 1 (2). pp. 181-189. ISSN P-ISSN 2776-169X dan E-ISSN 2776-1681

Santoso, Ari Beni and ., Martinus and ., Sugiyanto (2013) PEMBUATAN OTOMASI PENGATURAN KERETA API, PENGEREMAN, DAN PALANG PINTU PADA REL KERETA API MAINAN BERBASIS MIKROKONTROLER. Jurnal Ilmiah Teknik Mesin, 1 (1). ISSN 2337 4780

Saputra, Rizal Adi and Burhanuddin, Yanuar and Wicaksono, Mahruri Arif and Nur, Hadi and Sukmana, Irza (2019) PENGARUH UKURAN SERBUK TERHADAP SIFAT MEKANIK DAN FISIK MAGNESIUM BERPORI HASIL KOMPAKSI-SINTERING UNTUK APLIKASI SCAFFOLD TULANG MAMPU TERDEGRADASI. Mechanical Jurnal Ilmiah Teknik Mesin, 10 (2). pp. 54-60. ISSN 2460-1888

Saputra, W. Eko and harmen, harmen and Susila, M Dyan (2013) Pengaruh Penambahan Zat Aditif Alami Pada Bensin Terhadap Prestasi Sepeda Motor 4-Langkah. FEMA Jurnal Ilmiah Teknik Mesin, 1 (1). ISSN 2337-4780

Savetlana, Shirley and Akhyar, Gusri (2015) The Effect of Graphite and NBR on the Hardness of Fly-ash/Phenolic Composite for Brake Lining Application. The Effect of Graphite and NBR on the Hardness of Fly-ash/Phenolic Composite for Brake Lining Application, 827. pp. 371-375.

Savetlana, Shirley and Andryanto, Andreas (2012) Sifat-sifat Mekanik Komposit Serat TKKS-Poliester. Jurnal Mechanical, 3 (1). pp. 45-50. ISSN 2087-1880

Savetlana, Shirley and Homma, Hirommi and Gunawan, Fergyanto (2010) Approach to Dynamic Fracture Toughness of GFRP from aspect of Viscoelastic and Debonding Behaviours. Conference Proceeding dari Regional conference on mechanical and aerospace technology (RCMEAE) 2010.

Savetlana, Shirley and Lubis, Asnawi and Lingga, Aditya and Muhammad, Irfan and Dedi, Siadari and Gunawan, Efendi and Muhammad, Yusuf and Hel, Jefri (2020) Fly ash/phenolic resin composite for brake pad application: Fabrication, materials and thermal properties. COMPOSITES THEORY AND PRACTICE, 3-4. pp. 95-101. ISSN 2299-128X

Savetlana, Shirley and Mulvanev-Jhonson, Leigh and Gough, Tim and Kelly, Adrian (2018) Properties of nylon-6-based composite reinforced with coconut shell particles and empty fruit bunch fibres. PLASTICS, RUBBER AND COMPOSITES, 47 (2). pp. 77-86. ISSN 1465-8011 (Print) 1743-2898 (Online)

Savetlana, Shirley and Parulian, Yan (2013) Kekuatan Tarik Komposit Poliester Berpenguat Partikel Kayu Jati, Merawan dan Meranti Merah. Jurnal Mechanical, 4 (1). pp. 58-62. ISSN 2460 1888

Savetlana, Shirley and Sukmana, Irza and Hendriyanto, Agus and Wahyudi, Tri Cahyo (2017) The Effect of Sintering Time and Temperature on the Characteristic of Hidroxiapatite (HA) made of Limestone for Application in Bone. Journal of Physics: Conference Series. ISSN 1742-6588 (Print) 1742-6596 (Online) (Submitted)

Savetlana, Shirley and Zulhanif, zulhanif and Harnowo, Supriadi and Ramadhan, Irvan and Beliantara, Teten The Effect of Barite Addition and Graphite Particle Size on The Specific Abrasion of Fly-Ash/Phenolic Composite for Brake Lining Application. Journal of Engineering and Scientific Research (JESR).

Savetlana, Shirley and Zulhanif, zulhanif and Supriadi, Harnowo (2022) The effect of barite addition and graphite particle size on the specific abrasion of fly-ash/phenolic composite for brake lining application. Journal of Engineering and Scientific Research (JESR), 4 (6). pp. 8-13. ISSN pISSN268-0338 ; eISSN 268-1695

Savetlana, Shirley and Zulhendri, Zulhendri and Sukmana, Irza and Saputra, Fajar Andi THE EFFECT OF CARBON BLACK LOADING AND STRUCTURE ON TENSILE PROPERTY OF CARBON BLACK. Materials Science and Engineering. ISSN 1757-899X (In Press)

Sembiring, Alexander and Lubis, Asnawi (2020) Numerical Study for Comparison of Pseudo Modal and Direct Method inPredicting Critical Speed of Coaxial Dual Rotor System. IOP Conference Series: Materials Science and Engineering. pp. 1-9. ISSN doi:10.1088/1757-899X/990/1/012028

Sena, Mahendra and Fahmi, Fatra and Akhmad, Riszal PENGHEMAT BAHAN BAKAR DENGAN MENGGUNAKAN PIPA KATALIS METODE HYDROCARBON CRACK SYSTEM GANDA PADA SEPEDA MOTOR 4 TAK 160 CC. Gorontalo Journal of Infrastructure and Science Engineering, 2 (2). pp. 1-7. ISSN 2614-4638

Sinaga, Jorfri Boike (2002) Pemanfaatan Energi Panas yang Dibuang dari Kondensor untuk Pemanasan Air. poros, 5 (4). pp. 231-241. ISSN 1410 - 6841

Sinaga, Jorfri Boike and Azhar, - and Suudi, Ahmad and sugman, sugman (2020) PELATIHAN PEMBUATAN POMPA TANPA MOTOR (HYDRAULIC RAM PUMP) UNTUK IRIGASI PERSAWAHAN MASYARAKAT KELURAHAN SUMBERREJO KECAMATAN KEMILING BANDAR LAMPUNG. PROSIDING SENAPATI SEMINAR NASIONAL PENGABDIAN KEPADA MASYARAKAT TEKNOLOGI DAN INOVASI Pengabdian Masyarakat di Era Revolusi Industri 4.0 dan Society 5.0. pp. 159-165. ISSN 2685-0427

Sinaga, Jorfri Boike and Azhar, - and Tanti, Novri and Sugiman, - (2017) Perancangan Model Pembangkit Listrik Dengan Menggunakan Teknologi Pompa Tanpa Motor (Hydraulic Ram Pump). Jurnal Mechanical, 8 (2). ISSN 2087-1880 (In Press)

Sinaga, Jorfri Boike and Azhar, Azhar and Tanti, Novri and Sugiman, - (2017) Perancangan Model Pembangkit Listrik Dengan Menggunakan Teknologi Pompa Tanpa Motor (Hydraulic Ram Pump). Mechanical Jurnal Ilmiah Teknik Mesin, 2 (2). pp. 57-66. ISSN 2460-1888

Sinaga, Jorfri Boike and Azhar, Azhar and Tanti, Novri and Sugiman, Sugiman (2017) Perancangan Model Pembangkit Listrik dengan Menggunakan Teknologi Pompa Tanpa Motor (Hydraulic Ram Pump). Mechanical Jurnal Ilmiah Teknik Mesin, 8 (2). pp. 13-22. ISSN 2087-1880

Sinaga, Jorfri Boike and Su'udi, Ahmad and Susila, M Dyan and Sugiman, Sugiman (2020) Kajian Eksperimental Unjuk Kerja Turbin Helik dengan Bentuk Sudu NACA 0033 untuk Model Sistem Pembangkit Listrik. Seminar Nasional Hasil Penelitian & Pengabdian Kepada Masyarakat 2020 (SENANTIAS 2020), 1 (1). ISSN 2774-4833

Sinaga, Jorfri Boike and Supriadi, Harnowo and Tanti, Novri (2019) PENERAPAN TEKNOLOGI POMPA TANPA MOTOR (HYDRAULIC RAM PUMP) UNTUK MEMBANTU IRIGASI PERSAWAHAN MASYARAKAT DI KELURAHAN SUMBERREJO BANDAR LAMPUNG. kompasiana. (Submitted)

Sinaga, Jorfri Boike and Supriadi, Harnowo and Tanti, Novri (2018) PENERAPAN TEKNOLOGI POMPA TANPA MOTOR (HYDRAULIC RAM PUMP) UNTUK MEMBANTU IRIGASI PERSAWAHAN MASYARAKAT DI SUMBERREJO KECAMATAN KEMILING BANDAR LAMPUNG. Seminar Hasil Program Pengabdian Kepada Masyarakat Mono Tahun 2018. (Unpublished)

Sinaga, Jorfri Boike and Susila, M Dyan and Prayitno, Hadi (2021) PELATIHAN PEMBUATAN POMPA TANPA MOTOR (HYDRAULIC RAMPUMP) UNTUK IRIGASI PERTANIAN MASYARAKAT PEKON TIGA JAYA KECAMATAN SEKINCAU LAMPUNG BARAT. Jurnal Pengabdian kepada Masyarakat Sakai Sembayan, 5 (3). pp. 170-175. ISSN e-ISSN 2550-1089

Sinaga, Jorfri Boike and Suudi, Ahmad and Khonaifi, M. Aang and Rahman, Milia and Sugiman, - Perancangan Alat Pengujian Model Turbin Air Ultra Low Head untuk Sistem Pembangkit Listrik Tenaga Mikro Hidro (PLTMH). Prosiding Seminar nasional Siger 2017. (Submitted)

Sinaga, Jorfri Boike and Suudi, Ahmad and Khonaifi, M. Aang and Rahman, Milia and Sugiman, - (2017) Perancangan Alat Pengujian Model Turbin Air Ultra Low Head untuk Sistem Pembangkit Listrik Tenaga Mikro Hidro (PLTMH). Prosiding Seminar Nasional Energi dan Industri Manufaktur 2017. III74-III80. ISSN 978-602-5085-10-9

Sinaga, Jorfri Boike and Suudi, Ahmad and Sembiring, Okta Syahputra (2018) PENGGUNAAN SALURAN UNTUK MENINGKATKAN UNJUK KERJA MODEL SISTEM PEMBANGKIT LISTRIK ULTRA LOW HEAD. Jurnal Teknik Mesin, 07 (2). pp. 131-137. ISSN ISSN: 25492888

Sinaga, Jorfri Boike and Suudi, Ahmad and Susila, M Dyan (2020) EXPERIMENTAL STUDY ON PERFORMANCE OF HELICAL TURBINE WITH BLADE PROFILE OF NACA 0033 FOR ELECTRIC GENERATION SYSTEM MODEL. Prosiding SENANTIAS 2020. ISSN 978-623-90150-0-8 (In Press)

Sinaga, Jorfri Boike and Suudi, Ahmad and Susila, M Dyan and Sugiman, Sugiman (2020) Kajian eksperimental unjuk kerja model sistem pembangkit listrik menggunakan turbin helik bentuk sudu NACA 0033. Prosiding SINTA 2020. (In Press)

Sinaga, Jorfri Boike and Tanti, Novri and Admiral, Randa and Yessy, Christina (2021) Development of Testing Equipment of Gravitational Water Vortex Turbine to Support Implementation the Laboratory Work. Proceedings of the International Conference on Science, Technology and Interdisciplinary Research (IC-STAR) 2021. ISSN 2352-5401 (Submitted)

Sinaga, Jorfri Boike and Tanti, Novri and Erwiyantoro, Sutran Perancangan Model Sistem Pembangkit Listrik Menggunakan Turbin Aliran Silang. Prosiding Seminar Nasional Hasil Penelitian Sains, Teknik, dan Aplikasi Industri 2019. (In Press)

Sinaga, Jorfri Boike and Tanti, Novri and Susila, M Dyan (2020) Development of Testing Equipment of Hydrokinetic Turbine Model to Support Implementation of the Laboratory Work. IOP Conference Series: Materials Science and Engineering, 852.

Sinaga, Jorfri Boike and Tanti, Novri and Susila, M Dyan and Simarmata, Raja Aman (2019) Penerapan teknologi pompa tanpa motor (hydraulic ram pump) untuk membantu irigasi pertanian masyarakat di Sumberrejo Kecamatan Kemiling Bandar Lampung. Prosiding Seminar Nasiona lHasil Penelitian Sains, Teknik, danAplikasiIndustri 2019. (In Press)

Sinaga, Jorfri Boike and Tanti, Novri and Suudi, Ahmad Development of a Model of Hydro Electric Power Generation Suitable for Low Head. Proceeding of SEMIRATA International Conference on Science and Technology (SEMIRATA ICST) 2018. (Submitted)

Sinaga, Jorfri Boike and Tanti, Tanti and Suudi, Ahmad and Susila, M. Dyan Development of a Model of Hydro Electric Power Generation Suitable for Low Head. Prosiding International Conference of Science, Infrastructure Technology and Regional Development 2017. (Submitted)

Sinaga, Jorfri Boike and Tarkono, Tarkono and Susila, M Dyan and Sugiman, Sugiman (2020) PELATIHAN PEMBUATAN POMPA TANPA MOTOR (HYDRAULIC RAM PUMP) UNTUK MEMBANTU MENGAIRI AREAL PERTANIAN MASYARAKAT DESA HARAPAN JAYA KECAMATAN WAY RATAI KABUPATEN PESAWARAN. SAKAI SAMBAYAN — Jurnal Pengabdian kepada Masyarakat, 4 (1). pp. 60-65. ISSN ISSN 2550-1089

Sinaga, Jorfri Boike and irsyad, muhammad and Susila, M Dyan and Sugiman, Sugiman and Admiral, Randa (2022) SOSIALISASI TEKNOLOGI POMPA TANPA MOTOR (HYDRAULIC RAM PUMP) UNTUK IRIGASI PERTANIAN BAGI SISWA-SISWA SMK NEGERI 1 GADING REJO. Nemui Nyimah: Jurnal Pengabdian kepada Masyarakat, 2 (1). ISSN 2808-0904

Siswanto, Siswanto and Burhanuddin, Yanuar and Harun, Suryadiwansa (2018) Kajian Awal Pemantauan Keausan Pahat Potong Berdasarkan Pengukuran Sinyal Arus Motor Listrik Pada Proses Pemesinan Bubut. Mechanical Jurnal Ilmiah Teknik Mesin, 9 (2). pp. 67-71. ISSN 2460-1888

Su'udi, Ahmad and Akmal, Jamiatul and Tanti, Novri and Arizon, Arizon (2019) Using Geopolymer Composites for Heat and Corrosion Resistant Pipes. IOP Conf. Series: Materials Science and Engineering, 694 (1). pp. 1-8. ISSN 1757-899X

Sufuan, Nadia and Sukmana, Irza and Kadir, Mohammed Rafiq Abdul and Noviana, Deni (2014) The evaluation of hydroxyapatite (HA) coated and uncoated porous tantalum for biomedical material applications,. Journal of Physics: Conference Series, 495. pp. 1-7. ISSN 1742-6588 (Print) 1742-6596 (Online)

Sugiyanto, Sugiyanto (2005) ANALISIS PERILAKU CREEP BATANG STRUKTUR KAYU KAMPER. Rekayasa, Jurnal Teknik Sipil dan Perencanaan, 9 (1). pp. 1-7. ISSN 0852-7733

Sugiyanto, Sugiyanto (2011) Analisis Uji Destruktive dan Non Destruktuve Terhadap Hasil Sambungan Las V Tunggal Baja AISI 1045. Mechanical Jurnal Ilmiah Teknik Mesin Fakultas Teknik Universitas Lampung, 2 (2). ISSN 2087-1880

Sugiyanto, Sugiyanto (2005) Analisis perilaku creep Batang Struktur kayu Kamper. Rekayasa Jurnal Sipil dan Perencanaan, 09 (1). ISSN 0852-773

Sugiyanto, Sugiyanto (2018) Building Students’ Character in Elementary School through the Scientific Method: A Case Studyof the Lampung Province. SOCIAL SCIENCES & HUMANITIES, 3 (26). ISSN 1547 - 1561

Sugiyanto, Sugiyanto (2013) Hot Corrosion of Aluminized 2010 Steel With NaCI Deposit. Advanced Materials Research. ISSN 16662-8985

Sugiyanto, Sugiyanto (2013) Hot Corrosion of Aluminized 2010 Steel With NaCI Deposit. Trans Tech Publications, Switzerland, 789. ISSN 1662-8985

Sugiyanto, Sugiyanto (2019) Improvement of Low-cycle fatigue resistance in ISI 4140 steel by anneling treatment. International Journal of Fatigue. ISSN 406–417

Sugiyanto, Sugiyanto Improvement of Low-cycle fatigue resistance in ISI 4140 steel by anneling treatment. International Journal of Fatigue, 406-41 (125). ISSN 0142-1123

Sugiyanto, Sugiyanto (2012) Influence of water-vapor on the isothermal oxidation behavior of aluminized AISI 1020 steel at elevated temperatures. Procedia Engineering. ISSN 1877-7058

Sugiyanto, Sugiyanto (2018) Low Cycle Fatigue Analysis Of An Annealed AISI 4140 Steel. Prosiding SNTTM XVII: Seminar Nasional Teknik Mesin 2018. ISSN 2623-0313

Sugiyanto, Sugiyanto (2018) Model Pengembengan Kompetensi Profesional Berkelanjutan Dosen Vokasi (PKPB-DV). Hak Cipta. ISSN EC00201809588

Sugiyanto, Sugiyanto (2009) PENGARUH KELEMBABAN ELEKTRODA LAS TERHADAP KEKUATAN TARIK MULTIPASS WELDING BAJA AISI 1020. PROGRESS (30). pp. 63-70. ISSN 053-6678

Sugiyanto, Sugiyanto (2019) Panduan Diklat Pengembangan Kompetensi Profesional berkelanjutan Dosen Vokasi. Hak Cipta. ISSN EC00201809588

Sugiyanto, Sugiyanto (2009) Pengaruh Kelembaban Elektroda Las Terhadap Kekuatan tarik Multipass Welding Baja IAS! 1020. PROGRESS (30). pp. 63-70. ISSN 053-6678

Sugiyanto, Sugiyanto (2009) Pengaruh Komposisi Partikel Tempurung Kelapa Sawit Terhadap Sifat Mekanik Komposit Partikel. Proceeding Seminar Nasional Industri Service. ISSN 978-979-19280-0-7

Sugiyanto, Sugiyanto (2016) Pengembangan Kompetensi Profesional Berkelanjutan Dosen Vokasi pada Pendidikan Vokasional di Lampung. Jurnal Pendidikan Vokasi, 3 (6). ISSN 'P-ISSN 0088-2866 E-ISSN 2476-9401

Sugiyanto, Sugiyanto (2009) Surface Quality of AISI 1020 Steel Turning Process With Tool Auxiliary Cutting Edge Angle (Kr') Variation. Prosiding Seminar Hasil Penelitian dan Pengabdian Kepada Masyarakat. ISSN 978-979-8510-07-6

Sugiyanto, Sugiyanto (2007) Waktu Optimal Pembersihan Terak Pada multipass Welding baja AISI 1020. Prosiding, Seminar Hasil dan Pengabdian Kepada Masyarakat. ISSN 978-979-15535-1-3

Sugiyanto, Sugiyanto (2019) The resistance of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850°C. Material Research Express, 6. ISSN '2053-1591

Sugiyanto, Sugiyanto (2019) The resistence of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850 C. Material Research Express, 6 (0865d6). ISSN 2053-1591

Sugiyanto, Sugiyanto (2010) tudi Kekuatan sambungan Las Baja AISI 1045 dengan Berbagai Metode Posisi Pengelasan. Mechanical Jurnal Ilmiah Teknik Mesin Fakultas Teknik Universitas Lampung, 1 (1). ISSN 2087-1880

Sugiyanto, Sugiyanto and Badaruddin, Mohammad (2020) DEGRADATION OF MILD STEEL IN ETHANOL BURNING ENVIRONMENT: OXIDATION KINETICS AND MICROSTRUCTURAL ASPECT. International Journal of GEOMATE, 19 (73). pp. 82-90. ISSN 2186-2982 (P), 2186-2990 (O)

Sugiyanto, Sugiyanto and Badaruddin, Mohammad and Sugiyanto, Sugiyanto (2023) Perilaku fatik baja kekuatan tinggi AISI 4140 pada kondisi austempering. ARMATUR.

Sukendar, Aang and ., Martinus and Tanti, Novri (2013) PEMBUATAN SISTEM OTOMASIUNTUK PENGATURAN MEKANISME KERJA MESIN CETAK KERUPUK MENGGUNAKAN MIKROKONTROLER ATMega. Jurnal Ilmiah Teknik Mesin, 1 (1). ISSN 2337 4780

Sukmana, Irza (2017) ADVANCED BIOREACTOR SYSTEM FOR THE IMPLANTABLE BIOMATERIALS TESTING AND TISSUE ENGINEERING APPLICATIONS. ARPN Journal of Engineering and Applied Sciences, 12 (12). pp. 3767-3771. ISSN 1819-6608

Sukmana, Irza (2016) Aplikasi Logam Magnesium dan Paduannya Sebagai Material Baut Tulang Mampu Luruh. Prosiding Seminar Nasional TahunanTeknik Mesin Ke-15 Bandung 5-6 Oktober 2016, XV (MT-034). pp. 727-732.

Sukmana, Irza (2021) Application of magnesium alloys in orthopedic implant. Jurnal Polimesin, 19 (2). pp. 182-187. ISSN 16935462

Sukmana, Irza (2012) Bioactive Polymer Scaffold For Fabrication of Vascularized Engineering Tissue. Journal of Artificial Organs, 15. pp. 215-224. ISSN 1434-7229

Sukmana, Irza (2018) The Effect of Sintering Parameter on the Properties of Hydroxyapatite from Local Limestone for Bone Implant Application. AIP Conference Proceedings, 1977 (03003). 030039-1-030039-6. ISSN ISBN: 978-0-7354-1687-1

Sukmana, Irza (2006) Emerging Trend in the Application of Magnesium Alloys : From Mechanical to Bio – Engineering. Jurnal Teknologi, 9 (2). pp. 97-101. ISSN 1410 - 8577

Sukmana, Irza (2007) Friction Stir Welding as New Emerging Trend in Joining Technology for Aluminum Alloys. Journal Teknologi, 10 (2). pp. 155-160. ISSN 1410 - 8577

Sukmana, Irza (2011) Imaging Tools For The Analysis of Microvessel and Angiogenesis Development in a Tridimensional Cell Culture System. IEEE Series International Conference on Instrument Control and Automation ( ICA ), 2011 (2). pp. 181-183. ISSN 978-1-4577-1460-3

Sukmana, Irza (2012) Microvascular Guidance: A Challenge to Support the Development of Vascularised Tissue Engineering Construct. The Scientific World Journal, 2012. pp. 1-10. ISSN 2356-6140 (Print) 1537-744X (Online)

Sukmana, Irza (2016) Peluang dan tantangan aplikasi baut tulang mampu terdegradasi berbasis logam magnesium. Dinamika Teknik Mesin, 6 (2). pp. 93-98. ISSN 2502-1729

Sukmana, Irza (2007) Penelitian Koefisien Gaya Dan Energi Spesifik Proses Penggerindaan Rata Selubung Pada Baja Perkakas Vcn 150. poros, 10 (1). pp. 41-50. ISSN 1410 - 6841

Sukmana, Irza (2017) Penerapan Teknologi Mesin Pengaduk Media Tanam Jamur Tiram Putih di Sentra Jamur Pondok Pesantren Darussalam Lampung Selatan. SAKAI SAMBAYAN, 1 (2). pp. 46-50. ISSN e-ISSN 2550-1089

Sukmana, Irza Radiodensity Study of Hydroxyapatite Coated Porous Tantalum Implant Material of Rat Animal Model. Advanced Materials Research., 1112. pp. 470-473. ISSN 1662-8985

Sukmana, Irza (2018) Studi Sifat Mekanik Magnesium AZ31 Hasil Proses Pengecoran Tekan (Squeeze Casting). Jurnal Energi dan Manufaktur, Vol.11 (1). pp. 1-5. ISSN 2302-5255

Sukmana, Irza (2006) potentiality and drawback on the application of magnesium and its alloy in automobile industry. Jurnal Kajian Teknologi, 1 (8). pp. 45-52. ISSN 1411 - 2698

Sukmana, Irza and Burhanuddin, Yanuar (2007) THE EFFECT OF SENSITIZATION TEMPERATURE ON STRESS CORROSION CRACKING OF STAINLESS STEEL AISI 304 IN SULPHATE ACID ENVIRONMENT. JURNAL TEKNIK, 14 (2). pp. 115-122. ISSN 0854-2139

Sukmana, Irza and Djuansjah, Joy Riski Pangestu (2013) Sandwiched polymer fibre in fibrin matrices for the dictation of endothelial cells undergoing angiogenesis. Journal of Physics: Conference Series, 423 (1). pp. 1-4. ISSN Print : 1742-6588 Online : 1742-6596

Sukmana, Irza and Risano, A.Yudi Eka (2021) Study of the potential utilization of local Lampung Province resources in development of dental implant bioceramics. IOP Conference Series: Materials Science and Engineering, 2021 (1173). pp. 1-7. ISSN 1757-899X

Sukmana, Irza and Savetlana, Shirley and Burhanuddin, Yanuar and Wicaksono, Mahruri A. and Nur, Hadi (2019) Fabricating and Testing of Porous Magnesium Through Powder Metallurgy Technique using TWSH (Titanium Wire Space Holder) for Biodegradable Bone Scaffold Material. Journal of Engineering and Scientific Research (JESR), 1 (2). pp. 78-83. ISSN pISSN268-0338 ; eISSN 268-1695

Sukmana, Irza and Sustiono, Ade (2016) Pengaruh Kecepatan Putar Indentor Las Gesek Puntir (Friction Stir Welding) Terhadap Kualitas Hasil Pengelasan Alumunium 1100-H18. Jurnal Mechanical., 7 (1). pp. 15-19. ISSN 2087 - 1880 ( Print ) 240 - 1888 ( Online )

Sukmana, Irza and Tarkono, Tarkono and Yudi Eka Rosano, Ahmad and Sugiyanto, Sugiyanto (2020) PENINGKATAN NILAI TAMBAH DAN SISTEM PENGOLAHAN PANGAN PASKA PANEN JAMUR TIRAM PUTIH DI SENTRA JAMUR PONDOK PESANTREN DARUSSALAM, NATAR. PROSIDING SEMINAR NASIONAL PENELITIAN DAN PENGABDIAN KEPADA MASYARAKAT UNIVERSITAS SABURAI 2020, 2020 (1). pp. 323-332. ISSN 2746 9751

Sukmana, Irza and kadir, mohammed rafiq abdul and djuansjah, joy rizki pangestu (2013) In vitro angiogenesis assay for the guidance of microvessel containing multi-cellular lumen formation. Advanced Science Letters, 19 (12). pp. 1-4. ISSN 1936-6612 (Print) 1936-7317 (Online)

Sukrnana, lrza Porous Magnesium scaffold for bone implant application: A review. Advanced Materials Research.. ISSN 1662-8985

Supratman, Junaidi and Wardono, Herry and Susila, M Dyan (2013) Pengaruh Penggunaan Tabung Induksi Terhadap Konsumsi Bahan Bakar Sepeda Motor Bensin 4 Langkah. FEMA Jurnal Ilmiah Teknik Mesin, 1 (3). ISSN 2337-4780

Susanti, Neni and Gandidi, Indra Mamad and Susila, M Dyan (2013) POTENSI PRODUKSI MINYAK ATSIRI DARI LIMBAH KULIT KAYU MANIS PASCA PANEN. FEMA Jurnal Ilmiah Teknik Mesin, 1 (2). pp. 45-49. ISSN 2337-4780

Susila, M Dyan and Gandidi, Indra Mamad (2012) Kaji Penggunaan Methanol Sebagai Refrigeran Untuk Meningkatkan Efisiensi Termal Sistem Pendingin Konveksi Dengan Underground Thermal Storage Tank. Mechanical Jurnal Ilmiah Teknik Mesin, 3 (1). ISSN 2087-1880

Susila, M Dyan and Risano, A.Yudi Eka and Hartanto, Mei (2015) Kaji Eksperimental Pengaruh Pemasangan Photovoltaic Pada Dinding Bangunan Terhadap Temperatur Ruangan. Jurnal Mechanical, 6 (1). ISSN 2087-1880

Suudi, Ahmad (2010) Reduksi Bising Motor Diesel Menggunakan Partial Enclosure. Jurnal Mechanical, 1 (1). pp. 30-35. ISSN 2087-1880

Suudi, Ahmad and Akmal, Jamiatul and Grahita, Yoki Surya and Lubis, Asnawi and Tanti, Novri and Zulhendri, Zulhendri (2023) Media Pembangkit Gelombang Skala Laboratorium. Jurnal Teknik Mesin, 16 (2). pp. 127-132. ISSN 2655-5670

Suudi, Ahmad and Lubis, Asnawi (2011) Numerical simulation of contact stresses of rail-wheel interface. Proceeding Seminar Nasional Tahunan Teknik Mesin (SNTTM) ke-10, 10. pp. 673-677. ISSN 978-602-19028-0-6

Suudi, Ahmad and Lubis, Asnawi and Tanti, Novri and Ardimansyah, Dayu (2021) Reduksi suara bising genset menggunakan kotak genset berperedam 3 cm. SEMINAR NASIONAL ILMU TEKNIK DAN APLIKASI INDUSTRI - SINTA 2020, 3 (116). pp. 1-4. ISSN 2655-2914

Suudi, Ahmad and Lubis, Asnawi and Tanti, Novri and Zulhendri, Zulhendri (2023) Pentingnya Pemahaman tentang Suhu Ruangan dan Penggunaan Termostat Digital untuk Menghemat Energi. Nemui Nyimah: Jurnal Pengabdian kepada Masyarakat, 3 (2). pp. 1-8. ISSN 2808-0904

Suudi, Ahmad and Saputra, Anggi and Martinus, Martinus and Tanti, Novri and Lubis, Asnawi and Riszal, Akhmad (2023) Rancang Bangun Sistem Pengunci Pintu Rumah Menggunakan Remote nRF24l01+ Berbasis Mikrokontroler. TURBO, 12 (2). pp. 212-220. ISSN p-ISSN: 2301-6663, e-ISSN: 2477-250X

Suudi, Ahmad and Tanti, Novri and Akmal, Jamiatul and Hasymi, Zulhendri and Budiyanto, Prasetio (2019) Perancangan mesin penghancur sekam padi dengan poros penggerak horizontal. Jurnal Teknik Mesin Indonesia, 14 (2). pp. 37-41. ISSN ISSN (Print): 1907-350X; e-ISSN:2597-7563

Tamrin, Tamrin (2016) PENGARUH ASAP CAIR YANG DIBUAT DARI TIGA JENIS KAYU TERHADAP PEMBEKUAN LATEKS CAIR DAN MUTU RIBBED SMOKED SHEET (RSS). Preceding seminar Ferteta di Padang, 1 (1). pp. 34-42. ISSN 2548-5040

Tarkono, Tarkono and Hadi, Ali (2017) PENAMBAHAN SERAT TANDAN KOSONG KELAPA SAWIT (TKKS) DALAM RANGKA MEREDUKSI BERAT KOMPOSIT PAPAN SEMEN. Jurnal ROTOR, 10 (2). pp. 36-41. ISSN 24600385

Tarkono, Tarkono and Sugiyanto, Sugiyanto and Andriyanto, Andriyanto (2010) Studi Kekuatan Sambungan Las Baja AISI 1045 dengan Berbagai Metode Posisi Pengelasan. Mechanical Jurnal Ilmiah Teknik Mesin, 1 (1). pp. 36-44. ISSN 2087-1880

Telaumbanua, Mareli and Haryanto, Agus and Wisnu, Febryan Kusuma and Lanya, Budianto and Wiratama, Wahyu DESIGN OF INSECT TRAP AUTOMATIC CONTROL SYSTEM FOR CACAO PLANTS. DESIGN OF INSECT TRAP AUTOMATIC CONTROL SYSTEM FOR CACAO PLANTS. (Submitted)

Telaumbanua, Mareli and Ridwan, Ridwan and Haryanto, Agus and Suharyatun, Siti and Wisnu, Febryan Kusuma Irrigation Water Gate Monitoring System Based on The Internet of Things Using Microcontroller. Irrigation Water Gate Monitoring System Based on The Internet of Things Using Microcontroller. (Submitted)

Wahyudi, retno and Amrul, Amrul and irsyad, muhammad (2020) Karakteristik Bahan Bakar Padat Produk Torefaksi Limbah Tandan Kosong Kelapa Sawit Menggunakan Reaktor Torefaksi Kontinu Tipe Tubula. INVOTEK, 20 (2). pp. 1-8. ISSN 2549 –9815

Waluyo, Budi and Burhanuddin, Harmen and ., Martinus (2013) PERENCANAAN PENYEDIAAN ENERGI DI WILAYAH LAMPUNG MENGGUNAKAN PERANGKAT LUNAK LONG-RANGE ENERGY ALTERNATIVES PLANING SYSTEM (LEAP. Jurnal Ilmiah Teknik Mesin, 1 (2). ISSN 2337 4780

Waluyo, Sri and Lanya, Budianto and Telaumbanua, Mareli (2018) Pengendalian Temperatur dan Kelembaban dalam Kumbung Jamur Tiram (Pleurotus sp) Secara Otomatis Berbasis Mikrokontroler. Pengendalian Temperatur dan Kelembaban dalam Kumbung Jamur Tiram (Pleurotus sp) Secara Otomatis Berbasis Mikrokontroler, 3 (38). pp. 282-288. ISSN 2527-3825

Wardono, Herry and Ginting, Simparmin and Sinulingga, Eko (2018) THE USE OF ADSORBENTS OF LAMPUNG NATURAL ZEOLITES/COAL-FLY ASH IN REDUCING FUEL CONSUMPTION AND EXHAUST GAS EMISSIONS OF A 4-STROKE PETROL MOTORCYCLE. AIP Conference Proceedings, 1977 (1). 020060-1. ISSN 978-0-7354-1687-1

Wardono, Herry and Ginting, Simparmin and Utami, Herti (2022) Penerapan Teknologi Alat Spinner pada Produk Olahan Keripik UMKM Swakarya di Desa Rulung Sari, Lampung Selatan. Jurnal Sakai Sambayan, 6 (3). pp. 152-155. ISSN 2550-1089

Wardono, Herry and Risano, A.Yudi Eka and Ernadi, Adi (2018) Pemanfaatan Campuran Zeolit Dan Fly Ash Batubara yang Telah Diaktivasi Fisik Terhadap Akselerasi Mesin Sepeda Motor 4-Langkah. Jurnal TURBO, 7 (1). pp. 81-86. ISSN p-ISSN: 2301-6663, e-ISSN: 2477-250X

Yulianto, Tri and Febryano, Indra Gumay and Iryani, Dewi Agustina and Haryanto, Agus and Hasanudin, Udin and Hidayat, Wahyu (2020) Perubahan Sifat Fisis Pelet Tandan Kosong Kelapa Sawit Hasil Torefaksi. Jurnal Teknik Pertanian Lampung, 9 (2). pp. 104-111. ISSN 2302-559X

Yuwono, Suripto Dwi and Nugroho, Rianto Heru and Mulyono, Mulyono and ., Buhani and Suharso, S and Sukmana, Irza (2017) PURIFICATION OF LACTIC ACID FROM CASSAVA BAGASSE FERMENTATION USING ION EXCHANGE. ARPN Journal of Engineering and Applied Sciences, 12 (12). pp. 3853-3857. ISSN 1819-6608

Zulhanif, Hanif and Dedy Rizaldy, Dedy and Harnowo Supriadi, nowo (2022) The Effect of Holding Time Artificial Aging on Hardness and Microstructure of Al-2024. The Effect of Holding Time Artificial Aging on Hardness and Microstructure of Al-2024, 2 (1). pp. 28-32. ISSN 2722-8363

Zulhendri, Zulhendri and Sembiring, Alexander and Lubis, Asnawi (2018) Analytical and Numerical Studies of Dynamic Finite Element Analysis of Coaxial Dual Rotor Systems with Pseudo Modal Method Using Matlab. Prosiding Seminar Nasional Tahunan Teknik Mesin (SNTTM) ke-17. PMT-19/29-38. ISSN 2623-0313

harmen, harmen and Ahmad Yonanda, Yonanda and Amrizal, Amrizal PEMANFAATAN PLTA SKALA PICO SEBAGAI SOLUSI PENERANGAN UNTUK BUDIDAYA IKAN AIR TAWAR DI PEKON NEGERI SAKTI KECAMATAN GEDONG TATAAN, KABUPATEN PESAWARAN. Jurnal Pengabdian Kepada Masyarakat Ungu (ABDI KE UNGU). ISSN 2715-9558

hartanto, david eri and supriadi, harnowo and Savetlana, Shirley (2021) Pengaruh media pendingin yang tersirkulasi pada proses quenching terhadap kekerasan dan ketahanan aus pada baja AISI 1045. Prosiding Seminar Nasional SINTA FT UNILA 2020, 3 (107). pp. 1-4. ISSN 2655-2914

harun, suryadiwansa (2012) Advanced Materials Research, ISSN. 1662-8985. Vol. 588-589 pp.1744-1747, 2012.Characterization of Cutting Temperature and Ignition Phenomena of Magnesium Chip Using Infrared Imaging. Characterization of Cutting Temperature and Ignition Phenomena of Magnesium Chip using Infrared Imaging, 588-58. pp. 1744-1747. ISSN 1662-8985

harun, suryadiwansa (2011) Evaluasi dan Aplikasi Dinamometer Force Ring untuk Mengukur Gaya Pemotongan pada Pemesinan Bubut dengan Sistem Pahat Berputar. Jurnal Teknik Mesin ITS, 11 (3). pp. 231-239. ISSN 1411-9471

harun, suryadiwansa (2015) FEM Simulation of Machining AISI 1045 Steel Using Driven Rotary Tool. Applied Mechanics and Materials, 758. pp. 77-82. ISSN 1662-7482

harun, suryadiwansa (2010) Pemodelan dan Simulasi Urutan Pengelasan Bilah Roda Traktor Berbasis Metoda Elemen Hingga. Jurnal Teknik Mesin, Jurnal Keilmuaan dan Terapan Teknik Mesin, 12 (2). pp. 109-118. ISSN 1410-9867

harun, suryadiwansa (2012) Studi Awal Interaksi Man-Machine Pada Mesin Cetak Genteng Sistem Banting. Jurnal Mechanical, 3 (1). pp. 40-44. ISSN 2087-1880

harun, suryadiwansa and Panuju, Yahya and Hamni, Arinal (2012) Studi Awal Interaksi Man-Machine pada Mesin Cetak Genteng Sistem Banting. Jurnal Mechanical, 3 (1). pp. 40-44. ISSN 2087-1880

husaini, muhammad and Kusuma, Adhianto and diki, winanti UNILA OPTIMALKAN POTENSI TERNAK SAPI MELALUI PENINGKATAN PRODUKSI PAKAN SAPI. rilis.lampung.id. (Submitted)

irsyad, muhammad Getaran pada pipa percabangan tipe T akibat fluktuasi aliran dua fasa gas - cair. Jurnal Teknik Mesin ITS, 11 (3). pp. 173-181. ISSN 1411-9471

irsyad, muhammad (2018) Pemanfaatan Kandang Ternak Terpadu Sebagai Sumber Energi Terbarukan dari Biogas dan Photovoltaic untuk Masyarakat di Desa Terpencil. Prosiding Seminar Rekayasa Teknologi, 1 (1). pp. 39-46. ISSN 2621-5934

irsyad, muhammad and Amrizal, Amrizal and Susila, M Dyan (2018) The Addition of Phase Change Materials in the Wall to Reduce the Overall Thermal Transfer Value (OTTV). Prosiding Seminar Nasional Tahunan Teknik Mesin (SNTTM) ke 17, 1 (1). pp. 218-223. ISSN 2623-0313

irsyad, muhammad and Amrizal, Amrizal and Yulian, Aji Muhammad and Susila, M Dyan (2020) KARAKTERISTIK PERPINDAHAN PANAS ALAT PENUKAR KALOR TIPE STAGGERED FINS BERISI MATERIAL FASA BERUBAH DARI MINYAK KELAPA PADA PROSES PEMBEKUAN. Rekayasa Mesin, 11 (2). pp. 159-164. ISSN 2477-6041

irsyad, muhammad and Susila, M Dyan and Hartanto, Mey Pengaruh Pemasangan Photovoltaic Pada Dinding Bangunan Terhadap Temperatur Ruangan. Prosiding Seminar Nasional - XII Rekayasa dan Aplikasi Teknik Mesin di Industri, XII. TKE 23-TKE 28. ISSN 1693-3168

irsyad, muhammad and Tobing, Natal A.H.L and Susila, M Dyan (2020) Pemanfaatan material fasa berubah untuk mempertahankan kesegaran sayuran. TURBO, 9 (2). pp. 201-209. ISSN p-ISSN: 2301-6663, e-ISSN: 2477-250X

irsyad, muhammad and akmal, muhammad and Susila, M Dyan and Amrizal, Amrizal and Amrul, Amrul Heat Transfer Characteristics of Paraffin in Staggered Fins Heat Exchanger for the Cooling Process to Room Cooling Applications. IOP Conference Series: Earth and Environmental Science. ISSN doi:10.1088/1755-1315/520/1/012009

shirley, savetlana and Eko, Pratama and Riski, Pratama and Nafrizal, Nafrizal and Aniek, Handayani and Mochammad, Chalid and Adi, Cifriadi (2019) The tensile strength of natural rubber coagulated with mengkudu fruit (Morinda Citrifolia) and tawas (Al2(SO4)3).nH2O). Prosiding SNTTM XVIII. ISSN 2623-0313

shirley, savetlana and irza, sukmana and nafrizal, nafrizal (2019) PELATIHAN PEMBUATAN KOMPOSIT KARET/KARBON HITAM KEPADA PETANI KARET DI DESA KOTAWAI, KECAMATAN KASUI, KABUPATEN WAY KANAN, LAMPUNG. sakai sambayang, 3 (3).

shirley, savetlana and sugiyanto, sugiyanto and angga, Nurpratama (2019) The loading effect of sugarcane powder on the tensile property of glass fibre/sugarcane powder/polymer hybrid composite. Journal of Physics: Conference Series, 1376 (1). ISSN Print : 1742-6588 Online : 1742-6596

suparta, i wayan and ambya, ambya and Putra barusman, andala rama and muhammad, Kamaruzzaman (2020) The Effect of Industrial Agglomeration and Fiscal Decentralization on Income Disparity of Inter-Regional in Lampung Province. TEST, ENGINEERING & MANAGEMEN, 82. 9886 -9896. ISSN 0193-4120

Book Section

Arinal, Hamni and Gusri, Akhyar (2019) PENGARUH PARAMETER PEMESINAN TERHADAP KEKASARAN PERMUKAAN TI 6AL-4V ELI PADA PEMESINAN MICRO-MILLING. In: ILMU-ILMU TEKNIK: Kebencanaan 2019. UPT Perpustakaan Universitas Lampung, Bandar Lampung, pp. 204-2011. ISBN 978 602 73260 3 3

Panuju, Yahya (2023) Profesi Teknik Mesin. In: Teknik Mesin. Mafy Media Literasi Indonesia, Bandar Lampung, pp. 1-11. ISBN 978-623-8343-72-0

Monograph

Akhmad Riszal, Riszal PELATIHAN KETERAMPILAN PENGELASAN DALAM MEMBUAT PRODUK HASIL LAS UNTUK MENINGKATKAN KETERAMPILAN GURU DAN SISWA DI YAYASAN AL MUTTAQIEN BANDAR LAMPUNG. Project Report. unila. (In Press)

Akhmad Riszal, Riszal and Martinus, Martinus ANALISIS AERODINAMIKA DESAIN MOBIL LISTRIK ECO CAMPUS UNILA. Project Report. Unila. (In Press)

Badaruddin, Mohammad (2023) Fatik siklus rendah dan perambatan retak fatik. Discussion Paper. Deepublish.

Sugiri, Agus and Akhmad Riszal, Riszal ANALISIS POTENSI ENERGI ANGIN DI BANDAR LAMPUNG DAN KAJIAN AERODINAMIKA DESAIN TURBIN ANGIN. Project Report. Unila. (In Press)

harun, suryadiwansa (2014) Rancang Bangun Sistem Pahat Putar Modular (Modular Rotary Tool System) Untuk Pemesinan Material Alat Kesehatan Ortopedik (Titanium Alloy), Laporan Tahun Kedua Penelitian Strategis Nasional, Nopember 2014. Project Report. LPPM Universitas Lampung, Bandar Lampung. (Unpublished)

harun, suryadiwansa (2013) Rancang Bangun Sistem Pahat Putar Modular (Modular Rotary Tool System) Untuk Pemesinan Material Alat Kesehatan Ortopedik (Titanium Alloy), Laporan Tahun Pertama Penelitian Strategis Nasional, Nopember 2013. Project Report. LPPM Universitas Lampung, Bandar Lampung. (Unpublished)

Conference or Workshop Item

., Martinus and Djausal, Anshori and Djausal, Gita Paramita (2017) ECOROAD: A SUSTAINABLE INFRASTRUCTURE FOR ROAD DEVELOPMENT IN NATIONAL PARK. In: International Conference ASEAN Golden Anniversary, 22-23 Agustus 2017, Malang.

., Martinus and Djausal, Gita Paramita and Sulistiyanti, Sri Ratna and Muhammad, Meizano Ardhi and Telaumbanua, Mareli (2021) Tebakak Leaves Plates as an Eco-friendly Disposable Plates: Cultural Roots, Technology and People Transformations. In: 2nd International Indonesia Conference on Interdisciplinary Studies (IICIS 2021), 26-27 October 2021.

., Martinus and Haryanto, Agus and Triyono, Sugeng and Telaumbanua, Mareli (2020) Development of Teak Leaf Plate Molding Machine for Producing Plastic Alternative Products. In: Environmental Innovations: Advances in Engineering, Technology and Management, EIAETM, 21st-27th September, 2020, 21-27 September 2020, Ukrine.

Ahmad, Yonanda and Yulian, Nugraha and Amrizal, Amrizal (2016) PERANCANGAN, PEMBUATAN DAN PENGUJIAN COMPACT HEAT EXCHANGER PADA ALAT PENGERING KOPI. In: Seminar Nasional Tahunan Teknik Mesin XV, 5-7 Oktober 2016, ITB Bandung.

Akhmad, Riszal (2019) PENGHEMAT BAHAN BAKAR DENGAN MENGGUNAKAN PIPA KATALIS METODE HYDROCARBON CRACK SYSTEM GANDA PADA SEPEDA MOTOR 4 TAK MEGAPRO. In: SNATIF 2018, Univeritas Muria Kudus.

Akhmad Riszal, Riszal (0015) Analysis effect of wind speed variation on the design horizontal axis wind turbine with Qblade software. In: ICSTAR 2020, Zoom Meet. (Submitted)

Akmal, Jamiatul and Zulhendri, Zulhendri and Hidayatullah, Taufik (2018) STUDY OF CARBON FIBER REINFORCED GEOPOLYMERS COMPOSITE FOR TRAIN'S BRAKE BLOCKS. In: SNTTM XVII, Oktober 2018, 4-5 Oktober 2018, Kupang, NTT.

Akmal, Jamiatul and Zulhendri, Zulhendri and Suudi, Ahmad and Hidayatullah, Taufik (2018) Study of Carbon Fiber And Sulfur Reinforced Geopolymers Composite for Train's Brake Block. In: SNTTM XVII, Oktober 2018, 4-5 Oktober 2018, Kupang, NTT.

Amrizal, Amrizal Dynamic characterization for flat-plate solar collectors. In: Prosiding Seminar Nasional TahunanTeknik Mesin (SNTTM) XII.

Amrizal, Amrizal Effect of nanofluid concentration on the performance of PV/T collector under the tropical climate of Indonesia. In: Foitic 2020.

Amrizal, Amrizal Experimental Optical Performance of a Nonimaging Fresnel Reflective Concentrator for Building Integration Applications. In: Eurosun 2010.

Amrizal, Amrizal Foitic 2020 Itenas. In: Foitic 2020.

Amrizal, Amrizal Simulasi Unjuk Kerja Termal Kolektor Surya Pelat Datar Dengan Pendekatan Temperatur Fluida Kerja. In: Prosiding Seminar Nasional TahunanTeknik Mesin (SNTTM) XIII.

Amrizal, Amrizal The Use of Filtering for the Dynamic Characterization Of PV/T Flat Plate Collectors. In: Eurosun 2010.

Amrizal, Amrizal and Amrul, Amrul "Optimasi periode data berdasarkan time constant pada pengujian unjuk " kerja termal kolektor surya pelat datar. In: Prosiding Seminar Nasional TahunanTeknik Mesin (SNTTM) XV.

Amrizal, Amrizal and Amrul, Amrul PENERAPAN ISO 9806-1 DALAM PENGUJIAN UNJUK KERJA TERMAL KOLEKTOR SURYA PADA KAWASAN EKUATOR. In: Proseding Seminar Nasional Fisika dan Aplikasinya.

Amrizal, Amrizal and Amrul, Amrul and Ahmad Yonanda, Yonanda and Zulfa, Zulfa (2017) Comparison Study of Solar Flat Plate Collector With Two Different Absorber Materials. In: The 1st Faculty of Industrial Technology International Congress, October 9-11, 2017, Bandung.

Amrizal, Amrizal and Amrul, Amrul and Miftahul, Aziz and Adi, Supriyanto (2018) Performance analysis of hybrid PV/T solar collector under the tropical climate conditions of Indonesia. In: Seminar Nasional Teknik Mesin se Indonesia SNTTM XVII, 4-5 Oktober, Kupang NTT.

Amrizal, Amrizal and Irsyad, Muhammad and Amrul, Amrul (2020) An experimental investigation of TiO2 nanofluid as a base fluid for PV/T solar collector in low latitude tropical. In: The 2nd Faculty of Industrial Technology International Congress, 28 January 2020, Bandung. (In Press)

Amrizal, Amrizal and Irsyad, Muhammad and Amrul, Amrul An experimental investigation of the effect of geometry on the performance of a serpentine flat plate collector. In: Prosiding Seminar Nasional TahunanTeknik Mesin (SNTTM) XVIII.

Amrizal, Amrizal and Nugroho, Agung and irsyad, muhammad and Amrul, Amrul Effect of nanofluid concentration on the performance of PV/T collector under the tropical climate of Indonesia. In: the 2nd Faculty of Industrial Technology International Congress International Conference.

Amrizal, Amrizal and irsyad, muhammad and Amrul, Amrul An experimental investigation of TiO2 nanofluid as a base fluid for PV/T solar collector in low latitude tropical. In: Proceedings of the 2nd Faculty of Industrial Technology International Congress, 28 January 2020, Bandung. (In Press)

Amrul, Amrul and Amrizal, Amrizal Characteristics of Agricultural Residues Torrefacation Using a Tubular Type Continuous Reactor. In: Prosiding Seminar Nasional TahunanTeknik Mesin (SNTTM) XVIII.

Amrul, Amrul and Amrizal, Amrizal Pengembangan Model Matematika Kinetika Reaksi Torefaksi Sampah. In: Prosiding Seminar Nasional TahunanTeknik Mesin (SNTTM) XV.

Amrul, Amrul and Apriyanto, Agus and Sanjaya, Ika and Amrizal, Amrizal (2018) Experimental Study on Waste Biomass Torrefaction Using a Continuous Tubular Reactor. In: SNTTM XVII, Oktober 2018, 4-5 Oktober 2018, Kupang, NTT.

Burhanuddin, Harmen (2010) Analisis Efisiensi Energi di Industri Studi kasus: Industri Furniture di Semarang, Jawa Tengah. In: Seminar Nasional Sains & Teknologi – III, 18-19 Oktober 2010, Lembaga Penelitian – Universitas Lampung Bandar Lampung.

Burhanuddin, Yanuar (2012) Manufaktur Ramah Lingkungan: Suatu Tinjauan Pemesinan Paduan Magnesium Menggunakan Termografi. In: Seminar Nasional Energi Terbarukan & Produksi Bersih 2012.

Burhanuddin, Yanuar and Che Haron, Che Hassan and Ghani, Jaharah A. and Ihsan, A.K.A.M. and Ibrahim, G.A and Yasir, Ahmad and El-Maghriby, Nagib (2008) Tool Life Assessment using Fractional Factorial Method in Turning of Titanium Alloy with CBN cutting tool. In: Seminar on Engineering Mathematics, Malaysia.

Burhanuddin, Yanuar and Hamni, Arinal and Harun, Suryadiwansa and Ismanto, Nur and Arifin, Zaenal (2012) Penentuan Kondisi Kelonggaran Cetakan Optimum Pada Pemotongan Logam Plat Menggunakan Deform2D dan Pendekatan Analisis Ragam (ANOVA). In: Seminar Nasional Tahunan Teknik Mesin (SNTTM) XI, 16-17 Oktober 2012, Universitas Gadjah Mada, Yogyakarta.

Burhanuddin, Yanuar and Nugraha, Ade Salfa and Maulana, Masagus Imran and Harun, Suryadiwansa and Suudi, Ahmad (2019) The design of a roasted coffee sorter system in order to control the quality of roasted coffee automatically based on the analysis of the thermographic image and color of roasted coffee. In: Seminar Nasional Tahunan Teknik Mesin (SNTTM) XVIII, 9-10 Oktober 2019, Kampus Univ. Trisakti, Jakarta.

Burhanuddin, Yanuar and Purnomo, Muhammad Ridwan. A. and Che Haron, Che Hassan and Rochim, Taufiq (2005) Expert System Using For Group Technology Based on NC Programming Capability. In: Conference on Computer Integrated Systems 2005 (ConCIS 2005), 6 - 8 December, 2005, Putrajaya, Malaysia.

Burhanuddin, Yanuar and Setiawan, Feni and Harun, Suryadiwansa and Fitriawan, Helmy (2015) Pemodelan Penyalaan Pada Proses Bubut Kering Magnesium AZ31 Menggunakan Jaringan Syaraf Tiruan. In: Seminar Nasional Tahunan Teknik Mesin XIV (SNTTM XIV), 7-8 Oktober 2015, Banjarmasin.

Che Haron, Che Hassan and Ghani, Jaharah A. and Ibrahim, Gusri A. and Burhanuddin, Yanuar Effects of cutting Parameters on surface Roughness of AISI D2 in Turning Using Coated and Uncoated Carbide Tools. In: Quality in Research (QIR 2006), 6-7 September 2006, University of Indonesia, Depok.

Dwi Atmanto, Lucius Patria Giri and Wahyudyatama, Wahyudyatama and Panjaitan, Kevin Fernando and Ibrahim, Gusri Akhyar and Burhanuddin, Yanuar (2019) Optimal Conditions of Tool Wear and Surface Roughness of Magnesium Workpiece in Milling Machine with Combination of Taguchi Methods, Grey Relational Analysis and Principal Component Analysis. In: Seminar Nasional Tahunan Teknik Mesin (SNTTM) XVIII, 9-10 Oktober 2019, Kampus Univ. Trisakti, Jakarta.

Eka Risano, A. Yudi and AD Prabowo, Prabowo (2020) Energetic and exergetic performance computation of coalfired steam power plant using IAPWS IF-97 formulation for target variable datasets generation in machine learning based performance prediction. In: IC-STAR 2019, 23-25 September 2019, Bandar Lampung Indonesia.

Eka Risano, A. Yudi and Su'udi, Ahmad and Wahyu Nugraha, Jati (2017) Komputasi Visual Basic Untuk Optimalisasi Dan Redesain Proses Awal Pengeringan Kopra Di Usaha Koperasi Bersama Kopra Putih Sonia Kabupaten Pringsewu. In: Seminar Nasional Energi dan Industri Manufaktur SIGER 2017, 7-8 November 2017, Universitas Lampung. (Submitted)

Gandidi, Indra Mamad and Harmen, Harmen and irsyad, muhammad (2006) Pemodelan Temperatur Keluar Penukar Kalor dengan Metode Komputasi. In: HEDS Seminar on Science & Technology (HEDS-SST) 2006, 13-14 September 2006, Bandar Lampung.

Gusri, Akhyar and Arinal, Hamni (2019) Analisa statistik nilai kekasaran permukaan dan profil permukaan Ti-6AL-4V ELI pada pemesinan micro-milling. In: SEMINAR NASIONAL ILMU TEKNIK DAN APLIKASI INDUSTRI, 25 September 2019, Bandar Lampung.

Gusri, Akhyar and Arinal, Hamni (2019) IMPLEMENTASI MESIN SANGRAI UNTUK MENINGKATKAN PRODUKTIFITAS TEPUNG KACANG POLONG. In: SENAPATI SEMINAR NASIONAL PENGABDIAN KEPADA MASYARAKAT TEKNOLOGI DAN INOVASI, 29 Juni 2019, Bandar Lampung.

Gusri, Akhyar and Arinal, Hamni and Afriani, Lusmeilia and Rita, Milyanti (2017) Pemberdayaan Karang Taruna Melalui Pengolahan Sampah menjadi Pupuk Kompos Organik di Desa Sidomulyo. In: Seminar Nasional IBI Darmajaya, Bandar Lampung.

Gusri, Akhyar and Arinal, Hamni and Opi, Sumardi and Achmad, Yahya (2017) APLIKASI BOX BEHNKEN DESIGN UNTUK OPTIMASI PARAMETER PROSES PEMESINAN BUBUT MAGNESIUM AZ31 MENGGUNAKAN PAHAT PUTAR DAN UDARA DINGIN BERTEKANAN. In: SNTTM VII ITSurabaya.

Gusri, Akhyar and Arinal, Hamni and Sri maria, Puji Lestari and Hary, Subagyo (2017) ANALISA NILAI KEKASARAN PERMUKAAN MAGNESIUM AZ31 MENGGUNAKAN METODE TAGHUCI. In: SNTTM VII ITS urabaya.

Gusri, Akhyar and Arinal, Hamni and Suryadiwansa, Harun and Dhika, Arifian (2017) Analisa Keausan Pahat Putar pada Pembubutan Magnesium AZ31 Menggunakan Udara Dingin Bertekanan. In: SNTTM VII ITS urabaya, 6 Oktober 2017, Surabaya.

Gusri, Akhyar and Opi, Sumardi and Arinal, Hamni and Achmad, Yahya (2017) Aplikasi Box Behnken Design untuk Optimasi Parameter ProsesPemesinan Bubut Magnesium AZ31. In: SNTTM XVI, Oktober 2017, 5 Oktober 2017.

Gusri, Akhyar and Yanuar, Burhanuddin (2019) A Study of Drill Machining for Magnesium Alloy Using Taguchi Method. In: ICSTAR 5, 22 September 2019, Bandar Lampung. (Unpublished)

H, Zulhendri (2015) Studi Parameter Sistem Peredam Getaran Dinamik Tipe Dual-beam. In: Seminar Nasional Tahunan Teknik Mesin XIV (SNTTM XIV), 7-8 Oktober 2015, Banjarmasin.

Hamni, Arinal and Gandidi, Indra Mamad and Burhanuddin, Harmen (2010) Pengelolaan sampah terpadu Kota Bandarlampung dengan model R4P (reuse, recycle, reduce, replace, and participation). In: Seminar Nasional Sains & Teknologi – III, 18-19 Oktober 2010, Lembaga Penelitian – Universitas Lampung, Bandarlampung.

Harmen, Harmen (2012) Potensi Penggunaan Pembangkit Kogenerasi di Industri Garment. In: Seminar Nasional Energi Terbarukan & Produksi Bersih 2012, 20 Juli 2012, Bandar Lampung.

Harmen, Harmen and Amrizal, Amrizal (2005) Analisis Kolektor Pemanas Udara Pelat Datar Aliran Alamiah untuk Pengering Hasil-Hasil Pertanian. In: Seminar Nasional on ASET '05 Universitas Lampung, 12 September 2005, Bandar Lampung.

Harmen, Harmen and Arinal, Hamni (2011) Studi Kelayakan Tempat Pengelolaan Akhir (TPA) Sampah Regional Kota Bandarlampung. In: Seminar Hasil Penelitian & Pengabdian Kepada Masyarakat, September 2011, Universitas Lampung.

Harmen, Harmen and Menke, Christoph and Gvozdenac, Duŝan (2008) The Influence of Power Loss Coefficient and Other Factors to the Primary Energy Saving of a Cogeneration Power Plant in Thailand. In: 7th High Temperature Air Combustion and Gasification International Symposium, 13 - 16 January 2008, Phuket, Thailand.

Haryanto, Agus (2011) Pengaruh Penambahan Selimut Panci Terhadap Kinerja Energetik Tungku Biomasa. In: SEMINAR NASIONAL SAINS DAN TEKNOLOGI IV, 29-30 Novenber 2011, Bandar Lampung, Indonesia.

Haryanto, Agus and Nindhia, Tj. G. T. and Rahmawati, Winda and Hasanudin, Udin and Saputra, Wahyu and Santosa, A.B. and Tamrin, Tamrin and Triyono, Sugeng (2019) Effect of load on the performance of a family scale biogas-fuelled electricity generator. In: ISABE 2019 (The 3rd International Symposium on Agricultural and Biosystem Engineering), 6-8 August 2019, Makasar.

Herry, Wardono and Simparmin, Br Ginting and Eko, Aprilando Sinulingga (2017) THE USE OF ADSORBENTS OF LAMPUNG NATURAL ZEOLITES/COAL-FLY ASH IN REDUCING FUEL CONSUMPTION AND EXHAUST GAS EMISSIONS OF A 4-STROKE MOTORCYCLE. In: The 3rd international confernce on engineering, technology, and industrial application (ICETIA 2016), 7 Desember 2016, Surakarta. (In Press)

Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria (2017) Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. In: icstar, Bandar Lampung.

Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria (2017) Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. In: icstar, 5 Oktober 2017, Bandar Lampung.

Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria (2017) Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. In: ICSTAR, 5 Oktober 2017, Bandar Lampung.

Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria (2017) Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. In: ICSTAR.

Ibrahim, Gusri Akhyar and Hamni, Arinal and Akmal, Jamiatul (2016) Application of Taguchi Method L9 for Tool Life and Surface Roughness in Turning of Inconel 718 under Dry Cutting. In: ESTIC.

Ibrahim, Gusri Akhyar and Hamni, Arinal and Jamiatul, Akmal (2016) Keausan Mata Pahat Karbida pada Pemesinan Inconel 718 Menggunakan Pelumas Berkwantitas Minimum. In: SNTTM Bandung, 2016, Bandung.

Irsyad, Muhammad and Harmen, Harmen (2016) Potensi Penggunaan Material Fasa Berubah Untuk Aplikasi Penyejuk Ruangan Di Indonesia. In: Seminar Nasional ke 3 Rekayasa Material, Sistem Manufaktur dan Konversi Energi, 17-18 November 2016, Makasar.

Irza, Sukmana (2021) Simulation of Heat Transfer Characteristics on Palm Oil as Electrical Insulating Material Using Finite Difference Method. In: ELTICOM 2021, Medan.

Irza, Sukmana (2021) Simulation of Heat Transfer Characteristics on Palm Oil as Electrical Insulating Material Using Finite Difference Method. In: ELTICOM 2021, Medan, USU.

Jamiatul, Akmal Strength analysis of lifting lug of horizontal cylindrical pressure vessel. In: Seminar Nasional Tahunan Teknik Mesin 2019.

Lubis, Asnawi and Akmal, Jamiatul and Putra, Muhammad Rahardian and Tanti, Novri and Suudi, Ahmad (2021) Stress Assessment on Layered Bonding Tube under Hydrostatic External Pressure. In: Seminar Nasional Tahunan Teknik Mesin (SNTTM) ke-19, 13-14 Oktober 2021, Universitas Muhammadiyah Yogyakarta, Yogyakarta. (In Press)

Lubis, Asnawi and Savetlana, Shirley and Suudi, Ahmad (2013) The Influence of Radius Ratio and Cross Section Ovality on Limit Pressure of LPG Toroidal Tanks. In: The 12th Annual Nasional Seminar Of Mechanical Engineering (SNTTM XII)/JSME, 23-24 Oktober 2013, Bandar Lampung.

Lubis, Asnawi and Su'udi, Ahmad (2017) Ring Stability of Underground Toroidal Tanks. In: The 3rd International Conference on Engineering, Technology, and Industrial Application, 7 december 2016, Hotel Alila, Solo.

Mohammad, Badaruddin and Chaur, Jeng Wang and Herry, Wardono and Dwi, Asmi High Temperature Oxidation of Low Carbon Steel with and without an Al Coating in an Atmosphere Containing Burning Ethanol. In: ICOME 2017. (In Press)

Mohammad, Badaruddin and Tomi, Riza and Zulhanif, zulhanif The Effect of Diffusion Treatment on the Mechanical Properties of HotDip Aluminum Coating on AISI P20 Steel. In: ICOME 2018, 7-8 Oktober 2017, Surabaya. (In Press)

Mohammad, Badaruddin and zulhanif, Zulhanif and Harnowo, Supriadi Low Cycle Fatigue Properties of Extruded 6061-T6 Aluminum Alloy. In: SENTEN 2018, 4-5 Juli 2018, Palembang. (Submitted)

Nur Imam Subagio, Imam and Zulhanif, Hanif and Harnowo Supriadi, Nowo (2018) Analisis Pengaruh Artificial Aging Terhadap Sifat Mekanis Pada Aluminium Seri 6061. In: Seminar Nasional Energi dan Industri Manufaktur SIGER 2017, 7-8 November 2017, Universitas Lampung.

Panuju, Yahya and Martinus, Martinus and Riszal, Akhmad and Kobayashi, Hideki (2021) The Effect of Sustainable Design Strategies on Resource Consumption – Home Laundry Activities in Indonesia. In: EcoDesign International Symposium 2021, 1 -3 Desember 2021, Japan.

Risano, A.Yudi Eka and Eriyadi, Riko and Irsyad, Muhammad (2021) Eutectic Sodium Chloride (NaCl) as Phase Change Material (PCM) for Fish Cold Storage. In: The 7th International Conference on Science, Technology and Interdisciplinary Research 2021, 26 - 27 Oktober 2021, Bandar Lampung. (Submitted)

Riszal, Akhmad and ., Martinus and Yonanda, Ahmad (2022) Electric Car Design and Aerodynamics Analysis for Green Campus Unila E-Car. In: THE 2ND UNIVERSITAS LAMPUNG INTERNATIONAL CONFERENCE ON SCIENCE, TECHNOLOGY, AND ENVIRONMENT (ULICoSTE) 2021, 27–28 August 2021, Bandar Lampung, Indonesia.

Samosir, Ahmad Saudi and Akhmad Riszal, Riszal (2021) The effect analysis of wind speed variation to the horizontal axis wind turbine design with Q-blade. In: ICSTAR 2020, Bandar Lampung, Indonesia.

Savetlana, Shirley and Chandra, Berthony (2012) Mechanical Properties of Coconut Shell ParticlesReinforced Polyester Composite. In: Seminar Nasional Energi Terbarukan & Produksi Bersih 2012, 20 Juli 2012, Bandar Lampung.

Savetlana, Shirley and Nafrizal, Nafrizal and Reza, Adhan (2013) Charpy Impact Property of Sugar Palm Fibre Reinforced Epoxy Composite. In: The 12th Annual Nasional Seminar Of Mechanical Engineering (SNTTM XII)/ JSME, Bandar Lampung.

Savetlana, Shirley and Rajaguguk, Tumpal Ojahan and Zhohanes, MZ and Nardianto, Nardianto (2012) Mechanical Properties of Pineapple Fiber and Unidirectional Pineapple Fiber Reinforced Polyester Composite. In: Proceeding Seminar Nasional Tahunan Teknik Mesin XI (SNTTM XI) & Thermofluid IV Universitas Gadjah Mada (UGM), 16 Oktober 2012, Jogyakarta.

Sembiring, Alexander and Lubis, Asnawi and Akmal, Jamiatul (2020) Numerical Study for Comparison of Pseudo Modal and Direct Method in Predicting Critical Speed of Coaxial Dual Rotor System. In: Engineering Science and Technology International Conference (Estic2020), 9 September 2020, Padang, Sumatera Barat. (In Press)

Sinaga, Jorfri Boike and Burhanuddin, Yanuar and Sulsitiyo, Bambang (2018) Rancang Bangun Turbin Crossflow Untuk Pembangkit Listrik Tenaga Air Dengan Memanfaatan Energi Aliran Sungai Penyungkayan Di Dusun Penyungkayan Kecamatan Balik Bukit Kabupaten Lampung Barat Provinsi Lampung. In: Seminar Nasional Hasil Penelitian Sains, Teknik, dan Aplikasi Industri 2018, 19 October 2018, Bandar Lampung. (In Press)

Sinaga, Jorfri Boike and Lumban Toruan, Panly and Suudi, Ahmad and Sugiman, Sugiman (2018) Penerapan Teknologi Pompa Tanpa Motor (Hydraulic Ram Pump) untuk Model Sistem Irigasi Persawahan Masyarakat di Desa Wonokarto Kecamatan Gading Rejo Kabupaten Pringsewu Provinsi Lampung. In: Seminar Nasional Hasil Penelitian Sains, Teknik, dan Aplikasi Industri 2018, 19 October 2018, Bandar Lampung. (In Press)

Sinaga, Jorfri Boike and Supriadi, Harnowo and Suudi, Ahmad and Simarmata, Raja Aman and Sugiman, Sugiman (2018) DESIGN OF HYDRAULIC RAM PUMP TO HELP THE COMMUNITY AGRICULTURAL IRRIGATION SYSTEM IN SUMBERREJO, KEMILING DISTRIC, BANDAR LAMPUNG. In: Seminar Nasional Tahunan Teknik Mesin ke-17 (SNTTM XVII) 2018, 3-6 Oktober 2018, Kupang, Nusa Tenggara Timur. (In Press)

Sinaga, Jorfri Boike and Suudi, Ahmad and Khonaifi, M. Aang and Rahman, Milia and Sugiman, Sugiman (2018) Design of Testing Equipment of Ultra Low Head Hydraulic Turbine Model to Support Implementation the Laboratory Work of Machine Performance at Mechanical Engineering Department. In: The 2nd International Conference on Applied Sciences Mathematics and Informatics (ICASMI), 9-11 Agustus 2018, Bandar Lampung. (Submitted)

Sinaga, Jorfri Boike and Suudi, Ahmad and Sembiring, Okta and Manalu, Rizki Zakaria (2018) Perancangan Saluran Pengarah untuk Meningkatan Unjuk Kerja Model Sistem Pembangkit Listrik Menggunakan Turbin Helik. In: Seminar Nasional Hasil Penelitian Sains, Teknik, dan Aplikasi Industri 2018, 19 October 2018, Bandar Lampung. (In Press)

Sugiyanto, Sugiyanto (2020) Low Cycle Fatigue Properties of Aluminizing Coating on Cold- Drawn AISI 1018 Steel. In: IOP Conference Series: Materials Science and Engineering.

Sukmana, Irza and Savetlana, Shirley and Hermanto, Asep and Burhanuddin, Yanuar and Jasmawati, Noor (2016) A Review on Magnesium-based Materials for Bone Applications. In: The 2nd Composite Materials and Manufacturing Symposium (CMMS 2016), November 13-14, 2016, Kuala Lumpur, Malaysia.

Sukmana, Irza and Sugiyanto, Sugiyanto and Eka Risano, A. Yudi (2020) PENINGKATAN PENGETAHUAN DAN KEMAMPUAN DASAR PENGELASAN MAJU (ADVANCED WELDING) SISWA SEKOLAH MENENGAH KEJURUAN NEGERI (SMKN) 1 SEPUTIH AGUNG, KABUPATEN LAMPUNG TENGAH. In: Seminar Nasional Pengabdian Masyarakat Teknologi dan Inovasi (SENAPATI), 24 April 2019, Bandar Lampung.

Tarkono, Tarkono and Ali, Hadi (2016) Pemanfaatan Limbah Pabrik Kelapa Sawit Sebagai Material Teknik. In: Seminar Nasional Teknik Mesin "SISTEM" Universitas Jember, 26 November 2016, Jember, Indonesia.

Tarkono, Tarkono and Irza, Sukmana and Yanuar, Burhanuddin (2017) Pembuatan Alat Press Opak Singkong Menggunakan Motor Listrik AC. In: Seminar Nasional Pengabdian Kepada Masyarakat LPPM Unila 2017, 3-4 Desember 2017, GSG Unila. (Unpublished)

Wahyudi, retno and irsyad, muhammad (2018) Potensi Energi Terbarukan di Provinsi Lampung Untuk Mewujudkan Kemandirian Energi. In: SEMINAR NASIONAL HASIL PENELITIAN SAINS, TEKNIK DAN APLIKASI INDUSTRI, 19 Oktober 2018, Bandar Lampung.

Wardono, Herry and Badaruddin, Mohammad and Ginting, Simparmin Modifikasi Tungku Penggorengan Kerupuk Lempit Melalui Rancang Bangun Tungku dan Arah Semburan Api. In: Seminar Nasional Darmajaya, 25 Oktober 2017, Hotel Emersia Bandar Lampung.

Wardono, Herry and Badaruddin, Mohammad and Ginting, Simparmin (2018) PENINGKATAN PRODUKSI GULA MERAH UKM DESA PURWOREJO PESAWARAN LAMPUNG MELALUI RANCANG BANGUN TUNGKU SK32. In: Seminar Nasional Pengabdian Masyarakat Universitas Terbuka, SENMASTER 2018, 30 Oktober 2018, Universitas Terbuka Convention Center. (In Press)

Wardono, Herry and Harmen, Harmen and N.K., Romadhoni (2005) Studi Komparasi Kinerja Motor Bensin 4-Langkah Berbahan Bakar Premium dan Pertamax. In: Seminar Nasional on ASET '05 Universitas Lampung, 12 - 13 September 2005, Bandar Lampung.

Wardono, Herry and Naiborhu, Theofillius Gustavo and Risano, A.Yudi Eka and Susila E.S., M. Dyan and Amrizal, Amrizal (2019) Comparison of Utilization of Physical Activated Coconut Shell and Rice Husk Charcoal to Save Fuel Consumption of a 4-Stroke Gasoline Motorcycle. In: Seminar Nasional Tahunan Teknik Mesin XVIII, 9-10 Oktober 2019, Hotel Aston Kartika Grogol. (In Press)

Wardono, Herry and Naiborhu, Theofillius Gustavo and Risano, A.Yudi Eka and Susila E.S., M. Dyan and Amrizal, Amrizal (2019) Comparison of Utilization of Physical Activated Coconut Shell and Rice Husk Charcoal to Save Fuel Consumption of a 4-Stroke Gasoline Motorcycle. In: SNTTM XVIII 2019 Universitas Trisakti, 9-10 Oktober 2019, Aston Kartika Grogol Hotel Jakarta.

Wibowo, Agung and Lubis, Asnawi and Akmal, Jamiatul (2019) Analisis kekuatan lifting lug pada bejana tekan silinder horizontal. In: SEMINAR NASIONAL TAHUNAN TEKNIK MESIN XVIII (SNTTM 2019 -XVII), 9-10 Oktober 2019, Universitas Trisakti, Jakarta.

Yanuar, Burhanuddin and Che Haron, Che Hassan and Ghani, Jaharah A. and Ibrahim, G.A and Junaidi, Syarif Effects of Cutting Conditions and Chip Formation in Titanium Alloy Machining. In: Quality in Research (QIR) 2006, 6-7 September 2006, University of Indonesia, Depok.

Zulhendri, Zulhendri Studi Parameter Sistem Peredam Getaran Dinamik Tipe Dual-beam. In: Seminar Nasional Tahunan Teknik Mesin XIV (SNTTM XIV).

harmen, harmen (2005) Pengaruh Penambahan Zat Aditif Berbahan Dasar Methanol pada Bahan Bakar terhadap Prestasi Motor Bensin 4-Langkah Satu Silinder. In: Seminar Hasil-hasil Penelitian dan Pengabdian Kepada Masyarakat 2005, September 2005, Bandar Lampung.

harun, suryadiwansa (2013) The Experimental Investigation of Cutting Forces and Chip Formation on Turning with Actively Driven Rotary Tool. In: Seminar Nasional Tahunan Teknik Mesin XII, JSME Chapter 2013, 23-24 Oktober 2013, Bandar Lampung.

harun, suryadiwansa (2012) Studi Eksperimental Pengaruh Kecepatan Putar Pahat Terhadap Surface Roughness pada Pemesinan Bubut Kering Dengan Actively Driven Rotary Tool. In: Seminar Nasional Energi Terbarukan Dan produksi Bersih 2012, 20 Juni 2012, Bandar Lampung.

irsyad, muhammad and Pasek, Ari Darmawan and indratono, Yuli S and Adriansyah, Willy and Tarigan, Irvan B Karakteristik Viskositas Garam Hidrat Pada Temperatur Perubahan Fasa. In: Seminar Nasional ke 3 Rekayasa Material, Sistem manufaktur dan Energi 2016.

irsyad, muhammad and Wardono, Herry and Amrizal, Amrizal Karakteristik Perpindahan Panas Alat Penukar Kalor Berisi Material Fasa Berubah Pada Proses Pembekuan. In: SEMINAR NASIONAL HASIL PENELITIAN SAINS, TEKNIK DAN APLIKASI INDUSTRI, 19 Oktober 2018, Bandar Lampung.

irsyad, muhammad and Zulhanif, zulhanif (2018) Perbaikan Sistem Reaktor Komunal Dengan Bahan Baku kotoran Manusia di Pondok Pesantren Darul Amal, Kota Metro. In: PROSIDING SEMINAR NASIONAL PENGABDIAN KEPADA MASYARAKAT 2018, 14 November 2018, Bandar Lampung.

irsyad, muhammad and harmen, harmen Potensi Penggunaan Material Fasa Berubah Untuk Aplikasi Penyejuk Ruangan Di Indonesia. In: Prosiding Seminar Nasional ke 3 Rekayasa Material, Sistem manufaktur dan Energi 2016.

shirley, savetlana and Sugiyanto, Sugiyanto (2018) Cover & Document: The loading effect of sugarcane powder on the tensile property of glass fibre/sugarcane powder/polymer hybrid composite. In: The loading effect of sugarcane powder on the tensile property of glass fibre/sugarcane powder/polymer hybrid composite.

shirley, savetlana and Sugiyanto, Sugiyanto (2018) Cover & document: The loading effect of sugarcane powder on the tensile property of glass fibre/sugarcane powder/polymer hybrid composite. In: The loading effect of sugarcane powder on the tensile property of glass fibre/sugarcane powder/polymer hybrid composite.

shirley, savetlana and Sugiyanto, Sugiyanto (2018) Prosiding 3P dengan Judul: The Loading Effect of Sugarcane Powder on the tensile property of glass fibre/sugarcane powder/polymer hybrid composite. In: The Loading Effect of Sugarcane Powder on the tensile property of glass fibre/sugarcane powder/polymer hybrid composite.

Book

Lubis, Asnawi and Su'udi, Ahmad (2017) Ring Stability of Underground Toroidal Tanks. American Institute of Physics, AIP Conference Proceedings. ISBN 978-0-7354-1529-4

Nandi Haerudin, NH and Karyanto, Karyanto (2016) PELATIHAN PEMBUATAN BRIKET ARANG SEKAM UNTUK KETAHANAN ENENRGI DI GABUNGAN KELOMPOK TANI DESA SIDODADI DAN WARGOMULYO KABUPATEN PRINGSEWU LAMPUNG. LPPM Universitas Lampung, Bandar Lampung, pp. 249-256. ISBN 978-602-0860-12-1

Sugiyanto, Sugiyanto (2015) Hipotetic Model of Continuous Professional Development of Vocational Lecturer in The Higher Vocational Education In Lampung. UPT Perpustakaan Universitas Lampung, Bandar Lampung. ISBN 978-602-73260-1-9

Sugiyanto, Sugiyanto (2015) Hipotetic Model of Continuous Professional Development of Vocational Lecturer in The Higher Vocational Education In Lampung. Integrated Sci-Tech, Bandar Lampung. ISBN 978-602-73260-1-9

Sugiyanto, Sugiyanto and Tarkono, Tarkono (2009) PENGARUH KOMPOSISI PARTIKEL TEMPURUNG KELAPA SAWIT TERHADAP SIFAT MEKANIK KOMPOSIT PARTLKEL. Universitas Sultan Ageng Tirtayasa, Cilegon, Banten. ISBN 978-979-19280-0-7

Sugiyanto, Sugiyanto and Tarkono, Tarkono (2009) SURFACE QUALITY OF AISI 1020 STEEL TURNING PROCESS WITH TOOL AUXILIARY CUTTING EDGE ANGLE (Kr’) VARIATION. C . LPPM Unila, Bandar Lampung. ISBN 978-979-8510-07-6

Sugiyanto, Sugiyanto and Tarkono, Tarkono (2007) WAKTU OPTIMAL PEMBERSIHAN TERAK PADA MULTI PASS WELDING BAJA AISI 1020. Prosiding Seminar Hasil Penelitian & Pengabdian Kepada Masyarakat, Bandar Lampung. ISBN 978-979-15535-1-3

Sugiyanto, Sugiyanto and Tarkono, Tarkono (2017) WAKTU OPTIMAL PEMBERSIHAN TERAK PADA MULTIPASS WELDING BAJA AISI 1020. LPPM Unila, LPPM Unila. ISBN ISBN 978-979-15535-1-3

Sukmana, Irza (2016) Integrated Sci-Tech : Interdisciplinary Research Approach Volume 2. 2, 2016 (2). LPPM Unila, Indonesia. ISBN 978-602-0860-14-5

Sukmana, Irza (2017) Integrated Sci-Tech : Interdisciplinary Research Approach Volume 3. IC-STAR Book Chapter, 2017 (3). LPPM Unila, Indonesia. ISBN 978 – 602 – 70050 – 4 – 4

Sukmana, Irza (2015) Integrated Sci-Tech : The Interdisciplinary Research Approach. IC-STAR Book Chapter, 2015 (1). Universitas Lampung, Indonesia. ISBN 978-602-73260-1-9

Sukmana, Irza (2017) PROSIDING Konferensi Ilmiah Nasional Mahasiswa Indonesia (KOIN MAS) 2017. Prosiding Konferensi Ilmiah Nasional Mahasiswa Indonesia, 2017 (1). LPPM Unila, Indonesia. ISBN 978 – 602 – 70050 – 5 – 1

Tarkono, Tarkono and Nandang, Nandang (2019) Buku : Manufaktur Bahan Non Logam. CV Anugrah Utama Raharja, Bandar Lampung. ISBN 978-623-211-176-9 (In Press)

Ulvan, Ardian and Sukmana, Irza and Kurniawan, Denni (2018) IOP Conference Series: Materials Science and Engineering -Proceeding of 3rd IC-STAR 2017. 2018 IOP Conf. Ser.: Mater. Sci. Eng. 344, 2018 (344). IOP Publisher, USA.

Patent

P00202215064 (2022) PROSES AUSTEMPERING BAJA AISI 4140 UNTUK MENINGKATKAN KEKUATAN TARIK DAN KETAHANAN PERAMBATAN RETAK FATIK. P00202215064.

Mohammad Badaruddin, S.T., M.T., Ph.D (2018) PROSES PELAPISAN ALUMINIUM CELUP PANAS (HOT DIP ALUMINIZING COATING) PADA BAJA AISI P20. P00201810556.

LPPM UNILA (2018) PROSES PELAPISAN ALUMINIUM CELUP PANAS (HOT DIP ALUMINIZING COATING) PADA BAJA AISI P20. 0.

SERTIFIKAT PATEN SEDERHANA (2020) ALAT PEMBANGKIT LISTRIK TENAGA AIR. IDS000002926.

HKI (2018) Model Pengembangan Kompetensi Profesional Berkelanjutan Dosen Vokasi (PKPB-DV). EC00201809588.

HKI (2019) Panduan Diklat Pengembangan Kompetensi Profesional Berkelanjutan Dosen Vokasi. EC00201942068.

Model (2019) Panduan Diklat Pengembangan Kompetensi Profesional Berkelanjutan Dosen Vokasi. 000143532.

Model Pengembangan Kompetensi Profesional Berkelanjutan Dosen Vokasi (PKPB-DV (2018) Sertifikat & Dokumen Model Pengembangan Kompetensi Profesional Berkelanjutan Dosen Vokasi (PKPB-DV). EC00201809588.

Panduan Diklat Pengembangan Kompetensi Profesional Berkelanjutan Dosen Vokasi (2019) Sertifikat dan Dokumen Panduan Diklat Pengembangan Kompetensi Profesional Berkelanjutan Dosen Vokasi. EC00201942068.

Tarkono ; Nandang (2022) Buku Manufaktur Bahan Non Logam. EC00202 201389.

Teaching Resource

Zulkarnain, Iskandar and Zahab, Ridwan ALAT DAN MESIN PENGOLAHAN TANAH (MODUL KULIAH). [Teaching Resource] (Unpublished)

Other

Abdul Hakim Md, Yusop and Ahmed, Alsakkaf and Mohammed Rafiq Abdul, Kadir and Irza, Sukmana and Hadi, Nur (2021) Corrosion of porous Mg and Fe scaffolds: a review of mechanical and biocompatibility responses of Local Lampung Province. Taylor & Francis, Corrosion Engineering, Science and Technology.

Ahmad Yonanda, Yonanda Perancangan, pembuatan dan pengujian compaact Heat Exchanger pada alat pengering kopi. Teknik Mesin ITB.

Ahmad Yonanda, Yonanda and Amrizal, Amrizal Photovoltaic (PV) thermal performance simulation using segmentation lapping fin passive cooling. Politeknik Negeri Lhokseumawe.

Akmal, Jamiatul Bukti correspondensi_Analisis dinamik Tabung Kontinu. Jurusan Teknik Mesin UNILA.

Akmal, Jamiatul Cek Similarity_IOP_Optimization of matrix compositions. IOP.

Akmal, Jamiatul Cek Similarity_IOP_Using Geopolimer Composite. IOP.

Akmal, Jamiatul Cek Similarity_JIAE_Submerged Floating Tunnel Bridge (SFTB). ASASI.

Akmal, Jamiatul Cek Similarity_JTMI_Perancangan mesin penghancur sekam padi. JTMI.

Akmal, Jamiatul Cek Similarity_JTMI_Stress assessment pada bonding tube dengan beban tekanan eksterna. BKSTM Indonesia.

Akmal, Jamiatul Cek Similarity_KAPAL_HydrodynamicForcesonSubmerged FloatingTube. Department of Naval Architecture, Faculty of Engineering, Diponegoro University.

Akmal, Jamiatul Cek Similarity_KAPAL_TheTLP2-DOF as an alternative model for extreme wave application. Department of Naval Architecture, Faculty of Engineering, Diponegoro University.

Akmal, Jamiatul Cek Similarity_Machine_RESPON DINAMIS TENSION LEG PLATFORM (TLP). Jurusan Teknik Mesin FT– Universitas Bangka Belitung.

Akmal, Jamiatul Cek Similarity_Mechanical_Analisis Dinamik Tabung Kontinu. Jurusan Teknik Mesin FT– Universitas Lampung..

Akmal, Jamiatul Cek Similarity_Prosiding 2019_Trisakti_Strength analysis of lifting lug. BKSTM Indonesia.

Akmal, Jamiatul Cek Similarity_Prosiding SNTTM 2018 Kupang_Study of Carbon Fiber And Sulfur Reinforced Geopolymers. BKSTM Indonesia.

Akmal, Jamiatul Cek Similarity_Prosiding SNTTM_Keausan Mata Pahat Karbida pada pemesinan inconel. BKSTM Indonesia.

Akmal, Jamiatul Cek Similarity_Prosiding_Strength and Struktural Integrity. AIP.

Akmal, Jamiatul Cek Similarity_Rancang Bangun Mesin Cetak Centrifugal Casting. Jurusan Teknik Mesin Politeknik Negeri Padang.

Akmal, Jamiatul Chek similarity_Identifikasi Kinematika partikel. BKSTM Indonesia.

Akmal, Jamiatul Correspondensi_Identifikasi Kinematika Partikel. BKSTM-Indonesia.

Akmal, Jamiatul (2022) Hydrodynamic forces on submerged floating tube: The effect of curvature radius and depth level. Department of Naval Architecture, Faculty of Engineering, Diponegoro University.

Akmal, Jamiatul (2021) The TLP 2-DOF as an alternative model for extreme wave application. Department of Naval Architecture, Faculty of Engineering, Diponegoro University.

Amelia, Oktavia and Irza, Sukmana and Yanuar Zulardiansyah, Arif and Nama, Gigih Forda (2022) The Effect of Filler Adding Palm Kernel Shell Ash on Durability and the Marshall Values Properties of Asphalt Concrete Mix. Faculty of Engineering, Universitas Lampung, Journal of Engineering and Scientific Research (JESR).

Amrizal, Amrizal Artikel turnitine. Jurusan Teknik Mesin FT– Universitas Lampung.. (Unpublished)

Amrizal, Amrizal Bukti korespondensi Mechanical 2022. Jurusan Teknik Mesin FT– Universitas Lampung.. (Unpublished)

Amrizal, Amrizal Cek similarity Energy dan Manufaktur. Jurusan Teknik Mesin FT– Universitas Lampung.. (Unpublished)

Amrizal, Amrizal Cek similarity Infotekmesin. Jurusan Teknik Mesin FT– Universitas Lampung.. (Unpublished)

Amrizal, Amrizal Cek similarity Result In Eng. Jurusan Teknik Mesin FT– Universitas Lampung.. (Unpublished)

Amrizal, Amrizal Comparison Study of Solar Flat Plate Collector With Two Different Absorber Materials. ITENAS. (Unpublished)

Amrizal, Amrizal Comparison Study of Solar Flat Plate Collector With Two Different Absorber Materials. Fakultas Teknologi Industri ITENAS.

Amrizal, Amrizal Dynamic characterization for flat-plate solar collectors. FT Unila.

Amrizal, Amrizal EJ. ok. (Unpublished)

Amrizal, Amrizal Effect of nanofluid concentration on the performance of PV/T collector under the tropical climate of Indonesia. ITENAS. (Unpublished)

Amrizal, Amrizal Effect of nanofluid concentration on the performance of PV/T collector under the tropical climate of Indonesia. Fakultas Teknologi Industri ITENAS.

Amrizal, Amrizal Effects of Fin Height, Fin Thickness and Reynolds Number on Heat Transfer Enhancement of Flat-Plate Thermal Collector: A Numerical Analysis. Semarak Ilmu Publishing. (Unpublished)

Amrizal, Amrizal Experimental Optical Performance of a Non Imaging Fresnel Reflective Concentrator for Building Integration Applications. ISES.

Amrizal, Amrizal Foitic 2017. ok. (Unpublished)

Amrizal, Amrizal Foitic 2017 rev. ITENAS. (Unpublished)

Amrizal, Amrizal Foitic 2020. ok. (Unpublished)

Amrizal, Amrizal Foitic 2020 Turnitine. ITENAS. (Unpublished)

Amrizal, Amrizal Foitic 2020 rev. ITENAS. (Unpublished)

Amrizal, Amrizal Geometry Optimization of PV/T-TEG Collector under Different Operating Conditions Using CFD Simulation and Taguchi Method. Chulalongkorn University. (Unpublished)

Amrizal, Amrizal Hybrid photovoltaic–thermal solar collectors dynamic modeling. Elsevier.

Amrizal, Amrizal IC STAR. ok. (Unpublished)

Amrizal, Amrizal IC Star 2021 Turnitine. Jurusan Teknik Mesin FT– Universitas Lampung.. (Unpublished)

Amrizal, Amrizal Info Kegiatan Tambahan GB. ok. (Unpublished)

Amrizal, Amrizal Info kegiatan tambahan (Guru Besar). ok. (Unpublished)

Amrizal, Amrizal Infotekmesin. ok. (Unpublished)

Amrizal, Amrizal JARFMTS. ok. (Unpublished)

Amrizal, Amrizal JARFTMS. ok. (Unpublished)

Amrizal, Amrizal JSAT. ok. (Unpublished)

Amrizal, Amrizal Korespondensi CFD Letters. Semarak Ilmu Publishing. (Unpublished)

Amrizal, Amrizal Korespondensi IC STAR 2021. Jurusan Teknik Mesin FT– Universitas Lampung.. (Unpublished)

Amrizal, Amrizal Korespondensi Infotekmesin. Jurusan Teknik Mesin FT– Universitas Lampung.. (Unpublished)

Amrizal, Amrizal Mechanical 2019. ok. (Unpublished)

Amrizal, Amrizal Mechanical Turnitine. ok. (Unpublished)

Amrizal, Amrizal Optimasi periode data berdasarkan time constant pada pengujian unjuk kerja termal kolektor surya pelat datar. Universitas Lambung Mangkurat (UNLAM).

Amrizal, Amrizal PEMANFAATAN PLTA SKALA PICO SEBAGAI SOLUSI PENERANGAN UNTUK BUDIDAYA IKAN AIR TAWAR DI PEKON NEGERI SAKTI KECAMATAN GEDONG TATAAN, KABUPATEN PESAWARAN. Universitas Aisyah Pringsewu. (Unpublished)

Amrizal, Amrizal PENERAPAN ISO 9806-1 DALAM PENGUJIAN UNJUK KERJA TERMAL KOLEKTOR SURYA PADA KAWASAN EKUATOR. Unpad. (Unpublished)

Amrizal, Amrizal PENERAPAN ISO 9806-1 DALAM PENGUJIAN UNJUK KERJA TERMAL KOLEKTOR SURYA PADA KAWASAN EKUATOR. Universitas Padjadjaran, Jatinangor.

Amrizal, Amrizal Pengaruh Jarak antar Pipa Absorber terhadap Unjuk Kerja Kolektor Surya PV/T Pelat Datar Menggunakan Metode CFD. Politeknik Negeri Semarang. (Unpublished)

Amrizal, Amrizal Pengaruh Jarak antar Pipa Absorber terhadap Unjuk Kerja Kolektor Surya PV/T Pelat Datar Menggunakan Metode CFD. Polines. (Unpublished)

Amrizal, Amrizal Pengaruh Jarak antar Pipa Absorber terhadap Unjuk Kerja Kolektor Surya PV/T Pelat Datar Menggunakan Metode CFD. Politeknik Negeri Semarang. (Unpublished)

Amrizal, Amrizal Performance Analysis of PV/T-TEC Collector for The Tropical Climate Conditions of Indonesia. Semarak Ilmu Publishing.

Amrizal, Amrizal Performance Analysis of PV/T-TEC Collector for The Tropical Climate Conditions of Indonesia. Semarak Ilmu Publishing. (Unpublished)

Amrizal, Amrizal Performance analysis of hybrid PV/T solar collector under the tropical climate conditions of Indonesia. ok. (Unpublished)

Amrizal, Amrizal Performance analysis of hybrid PV/T solar collector under the tropical climate conditions of Indonesia. Universitas Nusa Cendana (UNDANA).

Amrizal, Amrizal Performance comparison of single and double pass PV/T solar collectors integrated with rectangular plate fin absorber. IOP Publishing Ltd..

Amrizal, Amrizal Performance comparison of single and double pass PV/T solar collectors integrated with rectangular plate fin absorber. Unila. (Unpublished)

Amrizal, Amrizal Rancang Bangun dan Analisis Unjuk Kerja Reaktor Torefaksi Kontinu Tipe Tubular Dengan Sistem Pemanas Oil Jcket. Fakultas Teknik Universitas Lampung.

Amrizal, Amrizal Reviewer Jurnal Internasional Bereputasi dan Rincian Dana Penelitian. ok. (Unpublished)

Amrizal, Amrizal SENFA 2015. ok. (Unpublished)

Amrizal, Amrizal SNTTM 2015 Unlam Rev. 0o. (Unpublished)

Amrizal, Amrizal SNTTM TRISAKTI REV. Univ Trisakti. (Unpublished)

Amrizal, Amrizal SNTTM UI. ok. (Unpublished)

Amrizal, Amrizal SNTTM UI Rev. UI. (Unpublished)

Amrizal, Amrizal SNTTM Unlam. ok. (Unpublished)

Amrizal, Amrizal SNTTM Unlam 2015. Unlam. (Unpublished)

Amrizal, Amrizal Senfa 2015 rev. Unpad. (Unpublished)

Amrizal, Amrizal Senfa Unpad. Unpad. (Unpublished)

Amrizal, Amrizal Sertifikat Eurosun. Graz University. (Unpublished)

Amrizal, Amrizal Sertifikat SNTTM XII Unila. Jurusan Teknik Mesin FT– Universitas Lampung.. (Unpublished)

Amrizal, Amrizal Simulasi Unjuk Kerja Termal Kolektor Surya Pelat Datar Dengan Pendekatan Temperatur Fluida Kerja. Teknik Mesin UI.

Amrizal, Amrizal Simulasi unjuk kerja kolektor surya PV/T berdasarkan bentuk penampang pipa absorber. Lembaga Penelitian dan Pengabdian Masyarakat, INSTITUT TEKNOLOGI SUMATERA.

Amrizal, Amrizal Simulasi unjuk kerja kolektor surya PV/T berdasarkan bentuk penampang pipa absorber. ITERA. (Unpublished)

Amrizal, Amrizal Simulasi unjuk kerja termal kolektor surya pelat datar dengan pendekatan temperatur fluida kerja. UI. (Unpublished)

Amrizal, Amrizal Sinta 2018 Turnitine. Unila. (Unpublished)

Amrizal, Amrizal Sinta 2018 korespondensi. ok. (Unpublished)

Amrizal, Amrizal Snttm Trisakti. Univ Trisakti. (Unpublished)

Amrizal, Amrizal Thermal Energy Storage Characteristics of Paraffin in Solar Water Heating Systems with Flat Plate Collectors. Semarak Ilmu Publishing.

Amrizal, Amrizal Unjuk Kerja Kolektor Surya Pelat Datar Aliran Paralel. Fakultas Teknik Universitas Lampung.

Amrizal, Amrizal Yonanda Turnitine Mech 2019. ok. (Unpublished)

Amrizal, Amrizal A dynamic model based on the piston flow concept for the thermal characterization of solar collectors. Elsevier.

Amrizal, Amrizal An experimental investigation of the effect of geometry on the performance of a serpentine flat plate collector. ok. (Unpublished)

Amrizal, Amrizal An experimental investigation of the effect of geometry on the performance of a serpentine flat plate collector. Universitas Trisakti.

Amrizal, Amrizal The use of filtering for the dynamic characterization of PV/T Flat Plate Collector. ISES.

Amrul, Amrul Characteristics of Agricultural Residues Torrefacation Using a Tubular Type Continuous Reactor. Teknik Mesin Universitas Trisakti.

Amrul, Amrul Pengembangan Model Matematika Kinetika Reaksi Torefaksi Sampah. Universitas Lambung Mangkurat (UNLAM).

Angga, Darma Prabowo and Amrizal, Amrizal Geometry Optimization of PV/T-TEG Collector under Different Operating Conditions Using CFD Simulation and Taguchi Method. Faculty of Engineering, Chulalongkorn University.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_An experimental investigation of the mechanical strength of cold-drawn AISI 1018 steel under high-temperature steady- and transient-state conditions. Elsevier, Construction and Building Materials.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Experimental investigation of mechanical properties of cold-drawn AISI 1018 steel at high-temperature steady-state conditions. Elsevier, Journal of Materials Research and Technology.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_High Temperature Corrosion of Aluminized AISI 4130 Steel with the Different Composition of NaCl-Na2SO4 Deposits. Directorate of Research and Community Services, Universitas Indonesia, Makara Journal of Technology.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. Indian Academy of Sciences-Springer, Bulletin of Materials Science.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_High-temperature oxidation behavior of aluminized AISI 4130 steel. American Institute of Physics Publishing Ltd, AIP Conference Proceeeding: ISFAP 2015.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Hot-corrosion of AISI 1020 steel in a molten NaCl-Na2SO4 eutectic at 700°C. American Institute of Physics Publishing Ltd., AIP Conference Proceeeding: ICESNANO 2016.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. Elsevier, International Journal of Fatigue.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Increasing of mild steel ST 41 grade hardness by carburizing treatment using an active carbon from coconut shell and CaCO3 catalyst from chicken eggshell. Penerbit Jurusan Teknik Mesin, Universitas Trisakti-Jakarta, Prosiding SNTTM 2019.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Isothermal Oxidation Behavior of Aluminized AISI 1020 Steel at the Temperature of 700 oC. The Institute of Research & Community Outreach - Petra Christian University, Jurnal Teknik Mesin- Univ. Kristen Petra.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Low Cycle Fatigue Analysis of an Annealed AISI 4140 Steel. Penerbit Program Studi Teknik Mesin-Universitas Nusa Cendana-Kupang, Prosiding SNTTM 2018.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Low Cycle Fatigue Properties of Extruded 6061-T6 Aluminum Alloy. IOP Publishing Ltd., Journal of Physics: Conference Series-SENTEN 2018.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_The effect of diffusion treatment on the mechanical properties of hot-dip aluminum coating on AISI P20 steel. American Institute of Physics Publishing Ltd, AIP Conference Proceeeding: ICOME 2017.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_The resistance of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850°C. IOP Publishing Ltd., Material Research Express. (Unpublished)

Badaruddin, Mohammad (2020) Similarity check result: An experimental investigation of the mechanical strength of cold-drawn AISI 1018 steel under high-temperature steady- and transient-state conditions. Elsevier, Construction and Building Materials. (Unpublished)

Badaruddin, Mohammad (2015) Similarity check result: High Temperature Corrosion of Aluminized AISI 4130 Steel with the Different Composition of NaCl/Na2SO4 Deposits. Directorate of Research and Community Services, Universitas Indonesia, Makara Journal of Technology. (Unpublished)

Badaruddin, Mohammad (2019) Similarity check result: High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. Indian Academy of Sciences-Springer, Bulletin of Materials Science volume. (Unpublished)

Badaruddin, Mohammad (2016) Similarity check result: High-temperature oxidation behavior of aluminized AISI 4130 steel. American Institute of Physics Publishing Ltd., AIP Conference Proceeeding: ISFAP 2015. (Unpublished)

Badaruddin, Mohammad (2017) Similarity check result: Hot-corrosion of AISI 1020 steel in a molten NaCl/Na2SO4 eutectic at 700°C. American Institute of Physics, ICESNANO 2016. (Unpublished)

Badaruddin, Mohammad (2019) Similarity check result: Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. Elsevier, International Journal of Fatigue. (Unpublished)

Badaruddin, Mohammad (2019) Similarity check result: Increasing of mild steel ST 41 grade hardness by carburizing treatment using an active carbon from coconut shell and CaCO3 catalyst from chicken eggshell. BKSTM, Prosiding SNTTM 2019. (Unpublished)

Badaruddin, Mohammad (2014) Similarity check result: Isothermal Oxidation Behavior of Aluminized AISI 1020 Steel at the Temperature of 700 C. Institute of Research and Community Outreach Petra Christian University, Jurnal Teknik Mesin- Univ. Kristen Petra. (Unpublished)

Badaruddin, Mohammad (2019) Similarity check result: Low cycle fatigue properties of extruded 6061-T6 aluminum alloy. IOP, Journal of Physics: Conference Series-SENTEN 2018. (Unpublished)

Badaruddin, Mohammad (2018) Similarity check result: The effect of diffusion treatment on the mechanical properties of hot-dip aluminumc oating on AISI P20 steel. American Institute of Physics Publishing Ltd, AIP Conference Proceeeding: ICOME 2017. (Unpublished)

Badaruddin, Mohammad (2019) Similarity check result: The resistence of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850 C. IOP Publishing Ltd., Material Research Express. (Unpublished)

Badaruddin, Mohammad (2018) Similarity check results: Low cycle fatigue analysis of an annealed AISI 4140 steel. Penerbit Program Studi Teknik Mesin-Universitas Nusa Cendana-Kupang, SNTTM 2018. (Unpublished)

Badaruddin, Mohammad (2019) Similarity check results; Experimental investigation of mechanical properties of cold-drawn AISI 1018 steel at high-temperature steady-state conditions. Elsevier, Journal of Materials Research and Technology. (Unpublished)

Badaruddin, Mohammad (2020) The resistance of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850°C. IOP Publishing Ltd., Material Research Express. (Unpublished)

Badaruddin, Mohammad and Chaur Jeng Wang, CJW and Wardono, Herry and Tarkono, Tarkono and Asmi, Dwi (2016) Similarity : High-Temperature Oxidation Behavior of Aluminized AISI 4130 Steel. AIP Publishing, 1305 Walt Whitman Rd Suite 110 Melville, NY 11747, US.

Badaruddin, Mohammad and Eka Risano, A. Yudi and Suudi, Ahmad (2016) IbM Peningkatan Produktifitas Kakao Melalui Rancang Bangun Tungku Biomassa Hemat Bahan Bakar. LPPM UNILA. (Unpublished)

Badaruddin, Mohammad and Risano, A.Yudi Eka and Wardono, Herry and Asmi, Dwi (2016) Hot-corrosion of AISI 1020 steel in a molten NaCl/Na2SO4 eutectic at 700°C. American Institute of Physics, International Conference on Engineering, Science and Nanotechnology 2016 (ICESNANO 2016), AIP Conference Proceedings.

Badaruddin, Mohammad and Wardono, Herry and Zulhanif, zulhanif and Harnowo, Supriadi and Salimor, Mario (2020) Similarity check result for Experimental investigation of mechanical properties of cold-drawn AISI 1018 steel at high-temperature steady-state conditions. Elsevier, Journal of Materials Research and Technology.

Badaruddin, Mohammad and Zulhanif, zulhanif and Supriadi, Harnowo and Ruwanto, Ruwanto (2019) MENINGKATKAN KEMAMPUAN PENGELASAN SISWA SMK BLK BANDAR LAMPUNG DENGAN PELATIHAN PENGELASAN HORISONTAL PADA PELAT BAJA. LPPM UNILA. (Unpublished)

Bagus Muhammad, Fauzi and Irza, Sukmana and Yanuar, Burhanuddin (2020) Initial Design of Forging Measuring Instrument for Application of Friction Welding. BKS PTN Barat Bidang Ilmu Teknik, JIT Journal of Innovation and Technology.

Bahfie, F. and Savet Lana, Shirley and Prawijaya, KMS Imam and Nurjaman, Fajar and Astuti, W. and Susanti, D Heat Treatment Technology for Stainless Steel 316(L). Progress in Physics of Metals.

Burhanuddin, Yanuar Form Peer review artikel jurnal berjudul Peluang dan Tantangan Aplikasi Baut Tulang Mampu Terdegradasi Berbasis Logam Magnesium. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer Review arikel pada Jurnal Int yang berjudul Copper and graphite electrodes performance in electrical-discharge machining of XW42 tool steel. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review Jurnal Internasional The Effect of Tool Edge Geomety on Tool Performance and Surface Integrity in Turning Ti-6Al-4V Alloys. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review Jurnal Internasional berjudul Application of Cenfial Composite Design for Optimization Machining Parameters when Machine Magnesium AZ3l. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review Jurnal Internasional berjudul FEM Simulation of Machining AISI 1045 Steel Using Driven Rotary Tool. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel Jurnal Internasional berjudul Characterization of Cutting Temperature and Ignition Phenomena of Magnesium Chip Using Infrared Imaging. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel jurnal berjudul Analisis Konsumsi Energi Listik Universal Milling Mesin Pada Berbagai Keadaan Operasi dan Parameter Pemesinan. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel jurnal berjudul Optimasi Ketebalan Dinding Model Atap Menara Siger Pada Proses Injection Molding. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel jurnal berjudul Studi Sifat Mekanik Magnesium AZ3I Hasil Proses Pengecoran Tekan (Squeeze Casting). Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel jurnal nasional berjudul Pemodelan dan Simulasi Urutan Pengelasan Bilah Roda Traktor Berbasis Metoda Elemen Hingga. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel jurnal nasional terakreditasi berjudul Analisis Ketelitian Pemosisian Machining Center Dengan Sistem Pengukuran Ketelitian Mesin Perkakas Berbasis Laser Interferometer. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel jurnal nasional terakreditasi berjudul The Effect of Sensitization Temperature on stress corrosion cracking of stainless steel AISI 304 in Sulphate Acid Environment. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel pada Jurnal Int berjudul The Effects of CBN Cutting Tool Grades on the Tool Life and Wear Mechanism When Dry Turning of Titanium Alloy. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel prosiding Int berjurdul The Machined Surface of Magnesium AZ3l After Rotary Turning at Air Cooling Condition. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel prosiding Int'l berjudul Effects of Cutting Parameters on Surface Roughness of AISI D2 in Turning Using Coated and Uncoated Carbide Tools. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel prosiding Int'l berjudul Effects of Cutting Conditions and Chip Formation in Titanium Alloy Machining. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel prosiding Int'l berjudul Expert System Using for Group Technology based onNC Programming Capability. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel prosiding berjudul Manufaktur Ramah Lingkungan: Suatu Tinjauan Pemesinan Paduan Magnesium Menggunakan Termografi. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel prosiding berjudul Pemodelan Penyalaan Pada Proses Bubut Kering Magnesium AZ31 Menggunakan Jaringan Syaraf Tiruan. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel prosiding berjudul Penentuan Kondisi Kelongggaran Cetakan Optimum Pada Pemotongan Plat Menggunakan DEFORM2D dan Pendekatan Analisis Ragam (ANOVA). Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel prosiding berjudul Tool life Assessment Using Fractional Factorial Method in Turning of Titanium Alloy with CBN Cutting Tool. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel prosiding judul Aplikasi Logam Magnesium dan Paduannya Sebagai Material Baut Tulang Mampu Luruh. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Peer review artikel prosiding judul Planning and Heating Analysis of Squeeze Casting Die Devices for Preparation of Basic Materials for Magnesium AZ31 Bone Bolts. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel judul Analisis Konsumsi Energi Listrik Universal Milling Machine Pada Berbagai Keadaan Operasi dan Parameter Pemesinan. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel judul Penentuan Kondisi Kelonggaran Cetakan Optimum Pada Pemotongan Logam Plat Menggunakan Deform2D dan Pendekatan Analisis Ragam (ANOVA). Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel judul Tool life assessment using fractional factorial method in turning of titanium alloy with CBN cutting tool. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel jurnal Int'l judul Copper and Graphite electrodes performance in electrical-discharge machining of XW42 tool steel. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel jurnal Studi Sifat Mekanik Magnesium AZ31 Hasil Proses Pengecoran Tekan (Squeeze Casting). Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel jurnal judul Analisis Ketelitian Pemosisian Machining Center Dengan Sistem Pengukuran Ketelitian Mesin Perkakas Berbasis Laser Interferometer. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel jurnal judul Application of Central Composite Design for Optimization Machining Parameters When Machine Magnesium AZ31. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel jurnal judul Characterization of Cutting Temperature and Ignition Phenomena of Magnesium Chip using Infrared Imaging. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel jurnal judul FEM Simulation of Machining AISI 1045 Steel Using Driven Rotary Tool. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel jurnal judul Optimisasi Ketebalan Dinding Model Atap Menara Siger Pada Proses Injection Molding. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel jurnal judul Peluang dan tantangan aplikasi baut tulang mampu terdegradasi Berbasis Logam Magnesium. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel jurnal judul Pemodelan dan Simulasi Urutan Pengelasan Bilah Roda Traktor Berbasis Metoda Elemen Hingga. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel jurnal judul The Effect of Sensitization Temperature on Stress Corrosion Cracking of Stainless Steel AISI 304 in Sulphate Acid Environment. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel jurnal judul The Effect of Tool Edge Geometry on Tool Performance and Surface Integrity in Turning Ti-6Al-4V Alloys. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel jurnal judul The Effects of CBN Cutting Tool Grades on The Tool Life and Wear Mechanism when Dry Turning of Titanium Alloy. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel prosiding judul Aplikasi Logam Magnesium dan Paduannya Sebagai Baut Tulang Mampu Luruh. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel prosiding judul Effects of Cutting Conditions and Chip Formation in Titanium Alloy Machining. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel prosiding judul Effects of Cutting Parameters on Surface Roughness of AISI D2 in Turning Using Coated and Uncoated Carbide Tools. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel prosiding judul Expert System Using for Group Technology Based on NC Programming Capability. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel prosiding judul Manufaktur Ramah Lingkungan: Suatu Tinjauan Pemesinan Paduan Magnesium Menggunakan Termografi. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel prosiding judul Pemodelan Penyalaan Pada Proses Bubut Kering Magnesium AZ31 Menggunakan Jaringan Syaraf Tiruan. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel prosiding judul Planning and Heating Analysis of Squeeze Casting Die Devices for Preparation of Basic Materials for Magnesium AZ31 Bone Bolts. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar Similarity check artikel prosiding judul The machined surface of magnesium AZ31 after rotary turning at air cooling condition. Fakultas Teknik. (Unpublished)

Burhanuddin, Yanuar and Prayitno, Hadi Laporan Akhir Penelitian Dasar BLU UNILA - MODEL PREDIKTIF KONSUMSI ENERGI MESIN PERKAKAS ELECTRICAL DISCHARGE MACHINING (EDM). Universitas Lampung. (Unpublished)

Deo Renaldo, Scorpion and Irza, Sukmana and A. Yudi Eka, Risano (2020) PENGARUH KECEPATAN PAHAT LAS (TOOL) TERHADAP KUALITAS HASIL PENGELASAN GESEK PUNTIR (FRICTION STIR WELDING) PADA PROSES PENYAMBUNGAN ALUMINIUM TIDAK SEJENIS (DISSIMILAR) AL1100 DAN AL5052. Jurusan Teknik Mesin – Fakultas Teknik Kampus Terpadu Universitas Bangka Belitung, Machine; Jurnal Teknik Mesin.

Fauzi, Ibrahim and Irza, Sukmana (2021) Application of magnesium alloys in orthopedic implant. Department Of Mechanical Engineering, Lhokseumawe State Polytecnic, Jurnal Polimesin.

Hadi, Hadi and Rio, Ariestia Pradipta and Anisa, Ulya Darajat and Rahayu, Lestari (2021) PENDAMPINGAN MANAJEMEN ENERGI SKALA RUMAH TANGGA KEPADA ANGGOTA KOPERASI MELATI JAYA SEBAGAI PARTISIPASI PEREMPUAN DALAM PENCAPAIAN AKSI PERUBAHAN IKLIM KOTA BANDAR LAMPUNG. LPPM Unila, LPPM Unila. (Unpublished)

Hadi, Prayitno and Angga, Darma Prabowo and Angelia, Eka Salsabillah and Rizal, Khairudin (2021) Peer Review, Jurnal Initial Investigation of Heat Transfer Characteristics of Rotary Dryer with Finned Vacuum Chamber System. Open Science and Technology. (Submitted)

Hadi, Prayitno and Sugiri, Agus (2021) PENDAMPINGAN MANAJEMEN ENERGI SKALA RUMAH TANGGA KEPADA ANGGOTA KOPERASI KUNTUM BUNGA SEBAGAI PARTISIPASI PEREMPUAN DALAM PENCAPAIAN AKSI PERUBAHAN IKLIM KOTA BANDAR LAMPUNG. LPPM Unila, LPPM Unila. (Unpublished)

Hadi, Prayitno and Tety Rachmawati, Tety (2021) KAJIAN KARAKTERISTIK PENGERING HIBRID V-SHAPE SOLAR COLLECTOR – INDIRECT GAS BURNER PADA PENGERINGAN CABAI. LPPM Unila, LPPM Unila. (Unpublished)

Harmen, Harmen and Amrizal, Amrizal and Yonanda, Ahmad (2022) Simulasi CFD Aliran Dua Fase Campuran Air-Uap Panas Bumi pada Kondisi Pipa Menurun dan Mendaki pada Berbagai Sudut Kemiringan. LPPM Universitas Lampung. (Unpublished)

Harmen, Harmen and Zulhanif, Zulhanif and Yonanda, Ahmad (2021) Kajian Numerik Karakteristik Perpindahan Panas Konveksi Fluida Organik Pada Kondisi Tekanan Superkritis. LPPM Universitas Lampung. (Unpublished)

Irza, Sukmana (2022) FME Transactions Corresponding Author. University of Belgrade.

Irza, Sukmana (2022) IJTech Corresponding Author. FT Universitas Indonesia.

Irza, Sukmana (2023) Kegiatan Tambahan GB. Unila. (Submitted)

Irza, Sukmana and Arifo Gunawan, Chyanegoro and Agus, Sugiri (2022) Biomedical Material for Stent Application: Current Status and Future Challenges. INSTEP Network Publishing, Journal of Applied Science, Engineering and Technology.

Irza, Sukmana and Egi, Andika and Joy Rizki Pangestu, Djuansjah and Tarkono, Tarkono (2022) The effect of pre-heating distance of shielded metal arc welding on the mechanical properties of AISI 1045 steel. LPPMPK - Sekolah Tinggi Teknologi Muhammadiyah Cileungsi, JTTM: Jurnal Terapan Teknik Mesin.

Irza, Sukmana and Fauzi, Ibrahim and Ahmad Yudi Eka, Risano (2021) The influence of friction stir welding tool shape on quality of AZ31 Magnesium welding product. Program Studi Teknik Mesin Universitas Muhamadiyah Metro, Turbo: Jurnal Program Studi Teknik Mesin.

Irza, Sukmana and Fauzi, Ibrahim and Mohammad, Badaruddin and Hadi, Nur (2022) Low Cycle Fatigue Properties of Extruded Magnesium AZ31B. Faculty of Mechanical Engineering, Univ. of Belgrade, FME Transactions.

Irza, Sukmana and Hafiz Favian, Gustin and Tarkono, Tarkono (2021) Pengaruh kedalaman las pada pengelasan gesek puntir dua muka logam Magnesium AZ31. Department of Mechanical Engineering, University of Udayana, Jurnal Energi dan Manufaktur.

Irza, Sukmana and Mad, Nur and Agus, Sugiri and Sugiyanto, Sugiyanto and Irfan, Hilmy (2022) he Effect of Pin Shape on the Friction Stir Welding Quality of Aluminum AA1100 Series. Faculty of Engineering, Universitas Lampung, Journal of Engineering and Scientific Research (JESR).

Irza, Sukmana and Shirley, Savetlana and Yanuar, Burhanudin and Mahruri Arif, Wicaksono and Hadi, Nur (2019) Fabricating and Testing of Porous Magnesium Through Powder Metallurgy Technique using TWSH (Titanium Wire Space Holder) for Biodegradable Bone Scaffold Material. Faculty of Engineering, Universitas Lampung, Journal of Engineering and Scientific Research (JESR).

Irza, Sukmana and Yusuf, Hendronursito and Shirley, Savetlana and K., Isnugroho and M, Amin and David C., Birawidha (2022) Characterization and Potential Production of Glass-Ceramics Biomaterial from Basalt Rock of Local Lampung Province. Faculty Engineering, University of Indonesia, International Journal of Technology.

Jamiatul, Akmal Hydrodynamic Forces on Submerged Floating Tube:The Effect of Curvature Radius and Depth Level. Department of Naval Architecture, Faculty of Engineering, Diponegoro University.

Jamiatul, Akmal (2023) Identifikasi kinematika partikel air dan karakterisasi gelombang ombak dengan metode video tracker. BKSTM Indonesia.

Jamiatul, Akmal Strength and Structural Integrity Assessment of Fillet Weld Attachment Junction on Cylindrical Pressure Vessels. AIP Conference Proceeding.

Jamiatul, Akmal Submerged Floating Tunnel Bridge (SFTB): A Status Report and Evaluation of Technology Readiness Level (TRL). Asosiasi Staf Akademik Perguruan Tinggi Seluruh Indonesia (ASASI).

Jamiatul, Akmal TheTLP2-DOF as analternative model for extreme wave application. Department of Naval Architecture, Faculty of Engineering, Diponegoro University.

Lubis, Asnawi and Rahardian Putra, Muhammad and Akmal, Jamiatul and Tanti, Novri and Suudi, Ahmad (2022) Stress assessment pada bonding tube dengan beban tekanan eksternal. BKSTM, Jurnal Teknik Mesin Indonesia.

Lubis, Asnawi and Savetlana, Shirley and Suudi, Ahmad (2013) The Influence of Radius Ratio and Cross Section Ovality on Limit Pressure of LPG Toroidal Tanks. Badan Kerjasama Teknik Mesin (BKSTM).

Lubis, Asnawi and Suudi, Ahmad (2021) STRESS ASSESSMENT PADA LAYERED BONDING TUBE DENGAN BEBAN TEKANAN EKSTERNAL. Fakultas Teknik Unila. (Unpublished)

Mahruri Arif, Wicaksono and Irza, Sukmana (2022) Finite Element Analysis of Magnesium AZ31B Materials for Biodegradable Bone Screw Application. Department Of Mechanical Engineering, Lhokseumawe State Polytecnic, Jurnal Polimesin.

Mahruri Arif, Wicaksono and Irza, Sukmana (2022) Study Analisis Elemen Tetrahedron dan Hexahedron Plat Tulang Material Magnesium AZ31B dengan Finite Element Method (FEM). Pusat Penelitian dan Pengabdian Masyarakat (P3M) Politeknik Negeri Cilacap, Infotekmesin.

Muhammad, Irsyad The Addition of Phase Change Materials in the Wall to Reduce the Overall Thermal Transfer Value (OTTV). Universitas Nusa Cendana (UNDANA).

Muhammad, Irsyad Heat Transfer Characteristics of Paraffin in Staggered Fins Heat Exchanger for the Cooling Process to Room Cooling Applications. IOP Publishing Ltd..

Muhammad, Irsyad Karakteristik Perpindahan Panas Alat Penukar Kalor Berisi Material Fasa Berubah Pada Proses Pembekuan. FT Unila.

Muhammad, Irsyad and Amrizal, Amrizal HEAT TRANSFER CHARACTERISTICS OF COCONUT OIL AS PHASE CHANGE MATERIALS IN FREEZING PROCESS. International Organization of IOTPE.

Muhammad, Irsyad and Amrizal, Amrizal KARAKTERISTIK PERPINDAHAN PANAS ALAT PENUKAR KALOR TIPE STAGGERED FINS BERISI MATERIAL FASA BERUBAH DARI MINYAK KELAPA PADA PROSES PEMBEKUAN. Teknik Mesin Universitas Brawijaya.

Risano, A.Yudi Eka (2013) PENGARUH JUMLAH SEL PADA HYDROGEN GENERATOR TERHADAP PENGHEMATAN BAHAN BAKAR. Jurnal Mechanical Jurnal Ilmiah Teknik Mesin, Jurnal Mechanical.

Risano, A.Yudi Eka and Gandidi, Indra Mamad (2014) Water Hammer Press Untuk Pengurangan Kadar Air Komoditas Onggok. Jurnal Mechanical Jurnal Ilmiah Teknik Mesin, Jurnal Mechanical.

Risano, A.Yudi Eka and Prabowo, A.D (2020) nergetic and exergetic performance computation of coal�fired steam power plant using IAPWS IF-97 formulation for target variable datasets generation in machine learning based performance prediction. IOP Conference Series: Materials Science and Engineering, IC-STAR 2019 IOP Publishing.

Risano, A.Yudi Eka and Suudi, Ahmad (2012) Pengaruh Jarak Pemasangan Secondary Cabin Roof (SCR) Terhadap Temperatur Kabin Mobil. Jurnal Mechanical Jurnal Ilmiah Teknik Mesin, Jurnal Mechanical.

Risano, A.Yudi Eka and Suudi, Ahmad and AP, Rendy Dwi (2015) Perancangan Heat Exchanger pada Binary Power Plant Kapasitas 100 KW yang Memanfaatkan Uap Sisa PLTP Ulu Belu. Jurnal Mechanical Jurnal Ilmiah Teknik Mesin, Jurnal Mechanical.

Risano, A.Yudi Eka and Tanti, Novri and Efendi, Maulana (2017) PERANCANGAN ULANG ALAT PENGERING BIJI KAKAO TIPE ROTARI SEDERHANA PADA USAHA MANDIRI DI DESA WIYONO KABUPATEN PESAWARAN. TURBO jurnal program studi teknik mesin SINTA 3, TURBO.

Savetlana, Shirley and Akhyar, Gusri (2015) The Effect of Graphite and NBR on the Hardness of Fly-ash/Phenolic Composite for Brake Lining Application. Trans Tech Publications.

Savetlana, Shirley and Andryanto, Andreas (2012) Sifat-sifat Mekanik Komposit Serat TKKS-Poliester. Jurusan Teknik Mesin FT– Universitas Lampung..

Savetlana, Shirley and Chandra, Berthony (2012) Mechanical Properties of Coconut Shell ParticlesReinforced Polyester Composite. Universiitas Lampung.

Savetlana, Shirley and Homma, Hiroomi and Gunawan, Fergyanto Approach to Dynamic Fracture Toughness of GFRP from Aspect of Viscoelastic and Debonding Behaviors. Regional Conference on Mechanical and Aerospace Technology Bali, ITB.

Savetlana, Shirley and Nafrizal, Nafrizal and Reza, Adhan (2013) Charpy Impact Property of Sugar Palm Fibre Reinforced Epoxy Composite. Badan Kerjasama Teknik Mesin (BKSTM).

Savetlana, Shirley and Parulian, Yan (2013) Kekuatan Tarik Komposit Poliester Berpenguat Partikel Kayu Jati, Merawan dan Meranti Merah. Universitas Lampung.

Savetlana, Shirley and Zulhendri, Zulhendri and Irza, Sukmana and Saputra, Fajar Andi (2017) The effect of carbon black loading and structure on tensile property of natural rubber composite. IOP Publishing ltd.

Sugiyanto, Sugiyanto (2020) Menjadi KoPromotor Gugus Kriswahyudi. LPPM-Unila.

Sugiyanto, Sugiyanto (2019) Peer Review 2P: Influence of Water-Vapor on the isothermal oxidation behavior of aluminized AISI 1020 steel at elevated temperatures. LPPM-Unila.

Sugiyanto, Sugiyanto (2019) Peer Review Judul 7:Hot Corrosion of Aluminized 2010 Steel With NaCl Deposit. LPPM-Unila.

Sugiyanto, Sugiyanto (2020) Penilaian Peer Review Untuk: High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. The Indian Academy of Science.

Sugiyanto, Sugiyanto (2020) Penilaian Peer Review untuk Low Cycle Fatigue Properties of Aluminizing Coating on Cold-Drawn AISI 1018 Steel. IOP Materials Science and Engineering.

Sugiyanto, Sugiyanto (2019) Penilaian Peer Review untuk: Work Readiness For Vocational Education Graduation In Lampung Province. IOSR Journal of Research & Method in Education.

Sugiyanto, Sugiyanto (2020) Penilaian Peer Review untuk:The Influence of Learning Motivation on the Learning Outcomes of Vocational Students at Lampung University. International Journal of Advanced Science and Technology.

Sugiyanto, Sugiyanto (2019) Penilaian Peer: The loading effect of sugarcane powder on the tensile property of glass fibre/sugarcane powder/polymer hybrid composite. Journal of Physics.

Sugiyanto, Sugiyanto (2020) Penilaian-Peer Review untuk 4 bh Jurnal dan 2 bh conference oleh Dekan. GEOMATE International Society. (Submitted)

Sugiyanto, Sugiyanto (2020) Penilaian: DEGRADATION OF MILD STEEL IN ETHANOL BURNING ENVIRONMENT: OXIDATION KINETICS AND MICROSTRUCTURAL ASPECT. LPPM Unila.

Sugiyanto, Sugiyanto (2013) Penilaian: Media-Literacy Rate of Certified Elementary School Teachers In Bandar Lampung City. UBL.

Sugiyanto, Sugiyanto (2013) Penilaian: Media-Literacy Rate of Certified Elementary School Teachers in Bandar Lampung City. UBL. (Submitted)

Sugiyanto, Sugiyanto (2009) Penilaian: Surface Quality of AISI 1020 Steel Turning Process With Tool Auxiliary Cutting Edge Angle (Kr') Variation. LPPM Unila. (Submitted)

Sugiyanto, Sugiyanto (2020) SK KOPROMOTOR MAHASISWA S3 PPS UIN RADEN INTAN LAMPUNG NAMA: SRI LESTARI. LPPM-Unila.

Sugiyanto, Sugiyanto (2020) SK Sebagai Penguji Disertasi PPS UNY No. 909 Tahun 2020. PPS UNY Yogyakarta.

Sugiyanto, Sugiyanto (2020) SK Sebagai Penguji Program Doktor dalam Ujian Terbuka Mahasiswa S3 PPS UNY. LPPM-Unila.

Sugiyanto, Sugiyanto (2020) Similarity Check Judul 5: High-temperature corrosion of aluminized AISI 1020 steel with Na C1 and Na2SO4 deposits. LPPM-Unila.

Sugiyanto, Sugiyanto (2020) Similarity Check Judul 6:The Influence of Learning Motivation on the Learning Outcomes of Vocation Students at Lampung University. LPPM-Unila.

Sugiyanto, Sugiyanto (2019) Similarity Check Judul 8: Work Readiness for Vocational Education Graduation in Lampung Province. LPPM-Unila.

Sugiyanto, Sugiyanto (2020) Similarity Check Judul 9P: Low Cycle Fatigue Analysis of an Annealed AISI 4140 Steel. LPPM-Unila.

Sugiyanto, Sugiyanto (2012) Similarity Check Prosiding Judul 2: Influence of water-vapor on the isothermal oxidation behavior of aluminized AISI 1020 steel at elevated temperatures. LPPM-Unila.

Sugiyanto, Sugiyanto Similarity Ckeck 4P: MEDIA-LITERACY RATE OF CERTIFIED ELEMENTARY SCHOOL TEACHERS IN BANDAR LAMPUNG CITY. LPPM-Unila.

Sugiyanto, Sugiyanto (2020) Similarity DEGRADATION OF MILD STEEL IN ETHANOL BURNING ENVIRONMENT: OXIDATION KINETICS AND MICROSTRUCTURAL ASPECT. GEOMATE International Society. (Unpublished)

Sugiyanto, Sugiyanto Similarity Judul 2P:Influence of Water-Vapor on the isothermal oxidation behavior of aluminized AISI 1020 steel at elevated temperatures. LPPM-Unila.

Sugiyanto, Sugiyanto and Badaruddin, Mohammad (2020) Similarity DEGRADATION OF MILD STEEL IN ETHANOL BURNING ENVIRONMENT: OXIDATION KINETICS AND MICROSTRUCTURAL ASPECT. GEOMATE International Society, International Journal of GEOMATE.

Sukmana, Irza Corresponding auhtor artikel Polimesin. Poltek Negeri Lhoksumawe.

Sukmana, Irza Corresponding author @ polimesin. Poltek Negeri Lhoksumawe.

Sukmana, Irza Corresponding author JESR irza. JESR Unila.

Sukmana, Irza Corresponding author JMachine. J Machine.

Sukmana, Irza Corresponding author artikel jmpm. UMY.

Sukmana, Irza Corresponding author artikel judul Pengaruh kedalaman las pada pengelasan gesek puntir dua mukalogam Magnesium. Univ Udayana.

Sukmana, Irza Corresponding author file J. ASET. INSTEP Publishing.

Sukmana, Irza Corresponding author irza @infotekmesin. Infotekmesin.

Sukmana, Irza Corresponding author irza jurnal TURBO. um mETRO.

Sukmana, Irza Corresponding author jttm. JTTM.

Sukmana, Irza Corresponding author title Initial Design of Forging Measuring Instrument for Application of Friction Weld. BKS PTN.

Sukmana, Irza Corresponding author title Study of the potential utilization of local Lampung Province resources in development of dental implant bioceramics. IOP MSE.

Sukmana, Irza (2019) Corresponding_Autor_Fabricating and Testing ofPorous Magnesium Through Powder Metallurgy Technique using TWSH (Titanium Wire Space Holder) for Biodegradable Bone Scaffold Material. JESR Unila.

Sukmana, Irza (2019) Peer_Review_Development of Fibrin Gel-Microgroove Model For Microvascularization by Endothelial Cells. Fakultas Teknik Unila.

Sukmana, Irza (2019) Peer_Review_In Vitro Angiogenesis Assay for the Guidance of Microvessel Containing Multi-Cellular Lumen Formation. Fakultas Teknik Unila.

Sukmana, Irza and Hendronursito, Yusup and Savetlana, Shirley and Isnugroho, Kusno and Amin, Muhammad and Birawidha, David Chandra Characterization and Potential Production of Glass-Ceramics Biomaterial from Basalt Rock of Local Lampung Province. International Journal of Technology (Ijitech).

Supriadi, Harnowo and Zulhanif, zulhanif and Badaruddin, Muhammad and Savetlana, Shirley SOSIALISASI TENTANG PENGUJIAN SAMBUNGAN LAS KEPADA PEKERJA LAS SKALA HOME INDUSTRY DI KELURAHAN GUNUNG TERANG BANDAR LAMPUNG. FAKULTASTEKNIK.

Suripto Dwi, Yuwono and Ridho, Nahrowi and Andi, Setiawan and Ni Luh Gede Ratna, Juliasih and Irza, Sukmana and Wasinton, Simajuntak and Sutopo, Hadi (2022) Synthesis of Cellulose–Polylactic Acid Microcapsule as a Delivery Agent of Rifampicin of Local Lampung Province. FMIPA Universitas Sriwijaya, Science and Technology Indonesia.

Susila E.S., M. Dyan and Risano, A.Yudi Eka and Hartanto, Mei (2015) Kaji Eksperimental Pengaruh Pemasangan Photovoltaic Pada Dinding Bangunan Terhadap Temperatur Ruangan. Jurnal Mechanical Jurnal Ilmiah Teknik Mesin, Jurnal Mechanical.

Suudi, Ahmad and Lubis, Asnawi and Tanti, Novri and Akmal, Jamiatul (2021) PEMANFAATAN ILMU MEKFLUD DALAM KONSTRUKSI SISTEM PERPIPAAN DISTRIBUSI AIR RUMAH TANGGA UNTUK WARGA MUDA DAN PEKERJA BANGUNAN DI DUSUN WONOKARTO KELURAHAN WONODADI KECAMATAN GADINGREJO KABUPATEN PRINGSEWU LAMPUNG. Fakultas Teknik Unila. (Unpublished)

Suudi, Ahmad and Risano, A.Yudi Eka and zamnur, mahasin (2014) Perancangan dan Pengujian Radiator Tester Skala Laboratorium yang Terintegrasi Pengatur Putaran Mesin dan Hembusan Angin (Regulator Wind Blower ). Jurnal Mechanical Jurnal Ilmiah Teknik Mesin, Jurnal Mechanical.

Tarkono, Tarkono and Hadi Ali, HA (2016) Similarity : PEMANFAATAN LIMBAH PABRIK KELAPA SAWIT SEBAGAI MATERIAL TEKNIK. Jurnal Rotor, Universitas Jember.

Tarkono, Tarkono and Hadi Ali, HA Similarity : PENAMBAHAN SERAT TANDAN KOSONG KELAPA SAWIT (TKKS) DALAM RANGKA MEREDUKSI BERAT KOMPOSIT PAPAN SEMEN. Jurnal Rotor, Universitas Jember.

Tarkono, Tarkono and Hadi Ali, HA (2015) Similarity : PENGARUH PENAMBAHAN SERAT TANDAN KOSONG KELAPA SAWIT (TKKS) TERHADAP SIFAT MEKANIK ETERNIT YANG RAMAH LINGKUNGAN. Jurnal Teknologi, AKPRIND Yogyakarta.

Tarkono, Tarkono and Hadi Ali, HA (2015) Similiarity :PEMANFAATAN SERAT TANDAN KOSONG KELAPA SAWIT (TKKS) DALAM PRODUKSI ETERNIT YANG RAMAH LINGKUNGAN. Jurnal Sains Teknologi & Lingkungan, Universitas Mataram.

Tarkono, Tarkono and Nandang, Nandang (2018) Similarity : PEMBUATAN GENTENG BERSERAT TANDAN KOSONG KELAPA SAWIT. Jurnal Rotor, Universitas Jember.

Tri C Wahyudi, TCW and Tarkono, Tarkono and Irza, Sukmana and Fauzi Ibrahim, FI and Yanuar, Burhanuddin and Fethma M Nor, FMN Similarity : Effect of Squeeze Casting on Mechanical and Microstructure Properties of Magnesium Alloy AZ31. AVIA International Journal of Aviation Science and Engineering, Institut Teknologi Bandung.

Ulin, Herlina and Muhammad, Yusuf and Ika, Kartika and Yanuar Zulardiansyah, Arif and Irza, Sukmana (2021) Pengaruh Variasi Temperatur Sinter Terhadap Kualitas Produksi Magnesium AZ31 Dengan Tube Furnace. Department of Mechanical of Engineering, Faculty of Engineering, Universitas Muhammadiyah Yogyakarta, JMPM (Jurnal Material dan Proses Manufaktur).

Wardono, Herry and Badaruddin, Mohammad and Simparmin, Br Ginting (2015) IbM PENGEMBANGAN TUNGKU HEMAT BAHAN BAKAR DAN KOKOH UNTUK INDUSTRI GULA MERAH DESA TEGALSARI KECAMATAN GADINGREJO, KABUPATEN PRINGSEWU,PROPINSI LAMPUNG. LPPM UNILA. (Unpublished)

Wardono, Herry and Badaruddin, Mohammad and Simparmin, Br Ginting (2017) IbM Peningkatan Produksi Kerupuk Lempit di Kelurahan Pringsewu Utara Kabupaten Pringsewu: Modifikasi Tungku Double Burner dan Pemanfaatan Gas Sisa Pembakaran Untuk Pengeringan Bahan Dasar Kerupuk. LPPM UNILA. (Unpublished)

Wardono, Herry and Badaruddin, Mohammad and Simparmin, Br Ginting (2018) Peningkatan Produksi Gula Merah UKM Desa Purworejo Kecamatan Negerikaton, Kabupaten Pesawaran Melalui Desain dan Rancang Bangun Tungku Biomassa Hemat Bahan Bakar. LPPM UNILA. (Unpublished)

Wardono, Herry and Risano, A.Yudi Eka and Ernadi, Adi (2018) PEMANFAATAN CAMPURAN ZEOLIT DAN FLY ASH BATUBARAYANG TELAH DIAKTIVASI FISIK TERHADAP AKSELERASI MESIN SEPEDA MOTOR 4-LANGKAH. TURBO jurnal program studi teknik mesin SINTA 3, TURBO.

Wardono, Herry and Risano, A.Yudi Eka and pane, ari andre (2014) Pengaruh Variasi Normalitas NaOH pada Aktivasi Basa-Fisik Zeolit Pelet Perekat terhadap Prestasi Sepeda Motor Bensin 4-Langkah. Jurnal Mechanical Jurnal Ilmiah Teknik Mesin, Jurnal Mechanical.

Yanuar Z., Arief and Mohd. Shuffy, Suhaidi and Naemah, Mubarakah and May, Raksmey and Irza, Sukmana and Rosyid Ridlo Al, Hakim (2021) Simulation of Heat Transfer Characteristics on Palm Oil as Electrical Insulating Material Using Finite Difference Method. IEEE, 5th International Conference on Electrical, Telecommunication and Computer Engineering (ELTICOM) 2021.

Yusuf, Hendronursito and Irza, Sukmana and Ahmad Yudi Eka, Risano (2021) Study of the potential utilization of local Lampung Province resources in development of dental implant bioceramics. IOP Publishing Ltd, IOP Conf. Series: Materials Science and Engineering International Conference on Science, Technology, and Interdisciplinary Research (IC-STAR 2020).

Zulhanif, Hanif and Harnowo Supriadi, Nowo and Sugiyanto, Sugiyanto and Nafrizal, Nafrizal PERLAKUAN PANAS PRECIPITATION HARDENING DENGAN VARIASI TEMPERATUR ARTFICIAL AGING TERHADAP SIFAT MEKANIS MATERIAL Al-2024. Proceeding Seminar Sinta UNILA, seminar sinta UNILA.

Zulhanif, zulhanif and Supriadi, Harnowo and Badaruddin, Mohammad and Ruwanto, Ruwanto (2018) PELATIHAN PENGUJIAN KETANGGUHAN BAHAN DAN KEKERASAN BAHAN LOGAM PADA SISWA SMK 2 MEI BANDAR LAMPUNG DI LABORATORIUM MATERIAL TEKNIK MESIN UNILA. LPPM UNILA. (Unpublished)

This list was generated on Fri Apr 19 21:21:08 2024 WIB.

Export as	Atom RSS 1.0 RSS 2.0