Che Haron, Che Hassan and Ghani, Jaharah A. and Ibrahim, Gusri A. and Burhanuddin, Yanuar Effects of cutting Parameters on surface Roughness of AISI D2 in Turning Using Coated and Uncoated Carbide Tools. In: Quality in Research (QIR 2006), 6-7 September 2006, University of Indonesia, Depok.

QIR UI 2006_yanuar-co.pdf

Download (8MB) | Preview


Surface roughness of tool steel AISI D2 is studied to investigate the effect of cutting parameters (cutting speed, feed rate and coating) on surface roughness at various machining parameters. Coated cerbide tools (KC 9125) and uncoated carbide tools (K 313) were used in turning tool steel AISI D2 bar with hardness of 267 HV. Machining tests were performed in dry cutting condition at various cutting speeds and feed rates while the depth of cut was kept constant, Taguchi's design of experiment with standard orthogonal array L12 was cmployed to accommodate the machining prrameters of various cutting speeds and feed rates. Coating cutting speed and feed rate inlluenced the surface roughness values but the main factor thst grve a significant effect on the surface roughness is the feed rate, for both types of cutting tools. The high cutting speed and low feed rate produced a low surface roughness value. The lowest surface roughness value for uncoated and coated carbide tools were recorded at a combination of the cutting speed of 250 m/min and the feed rate of 0.05 rpm/put Generally, coated carbide toots with low feed rate performed better than uncoated carbide tools.

Item Type: Conference or Workshop Item (Paper)
Subjects: T Technology > TJ Mechanical engineering and machinery
T Technology > TS Manufactures
Divisions: Fakultas Teknik (FT) > Prodi Teknik Mesin
Depositing User: DR. Yanuar BURHANUDDIN
Date Deposited: 14 May 2019 08:32
Last Modified: 14 May 2019 08:32

Actions (login required)

View Item View Item