Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | G | H | I | M | P | S | W | Y | Z
Number of items: 64.

A

Amrul, Amrul and Muhammad, Fariz and Indra Mamad, Gandidi SIMULASI TERMAL REAKTOR TOREFAKSI KONTINU TIPE TUBULAR UNTUK PRODUKSI BAHAN BAKAR PADAT DARI SAMPAH KOTA. Prosiding Seminar Nasional Tahunan Teknik Mesin XVI tahun 2017. (In Press)

B

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Asmi, Dwi High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. https://www.ias.ac.in/article/fulltext/boms/043/0011, https://www.ias.ac.in/article/fulltext/boms/043/0011.

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Asmi, Dwi High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. https://www.ias.ac.in/article/fulltext/boms/043/0011, https://www.ias.ac.in/article/fulltext/boms/043/0011.

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Herry, Wardono Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. International Journal of Fatigue, 125. ISSN 406–417

Badaruddin, Mohammad and Wang, Chaur Chaur and Saputra, Yudhistyra and Khalil, Abdul Rouf Amarulloh High Temperature Corrosion of Aluminized AISI 4130 Steel with the Different Composition of NaCl/Na2SO4 Deposits. Makara Journal of Technology, 19 (2). pp. 45-50. ISSN 2355-2786

Badaruddin, Mohammad and kurniawan, RD and Sugiyanto, Sugiyanto and Pambudi, A Low Cycle Fatigue Properties of Aluminizing Coating on Cold-Drawn AISI 1018 Steel. IOP Publishing.

C

Che Haron, Che Hassan and Ghani, Jaharah A. and Ibrahim, Gusri A. and Burhanuddin, Yanuar Effects of cutting Parameters on surface Roughness of AISI D2 in Turning Using Coated and Uncoated Carbide Tools. In: Quality in Research (QIR 2006), 6-7 September 2006, University of Indonesia, Depok.

D

DW, Hidayati and Akhmad, Riszal Bahan Ajar Geometri Analitik Berbasis Geogebra dan Kreativitas Belajar: Dapatkah Meningkatkan Kemampuan Pemecahan Masalah? NPM (Jurnal Nasional Pendidikan Matematika), 2 (3). pp. 191-206. ISSN 2549-4937

Dw, Hidayati and akhmad, riszal APAKAH ADA HUBUNGAN ANTARA KREATIVITAS BELAJAR TERHADAP KEMAMPUAN PEMECAHAN MASALAH? In: Seminar Nasional Edusainstek, Universitas Muhammadiyah Semarang (UNIMUS).

G

Gandidi, Indra Mamad and Susila, M Dyan and Mustofa, Ali and Pambudi, Nugroho Agung Thermal - Catalytic Cracking of Real MSW into Bio Crude Oil. Journal of the Energy Institute. ISSN 1743-9671

Gandidi, Indra Mamad and Susila, M Dyan and Pambudi, Nugroho Agung Co-cracking of real MSW into bio-oil over natural kaolin. IOP Conference Series: Earth and Environmental Science.

Gandidi, Indra Mamad and Susila, M Dyan and Pambudi, Nugroho Agung Production of valuable pyrolytic oils from mixed Municipal Solid Waste (MSW) in Indonesia using non-isothermal and isothermal experimental. Journal of Case Studies in Thermal Engineering. pp. 357-361. ISSN 2214-157X

H

Herpratiwi, Herpratiwi and Sugiyanto, Sugiyanto and Budiyanto, Budiyanto and abdul, halim Work Readiness For Vocational Education Graduation In Lampung Province. http://www.iosrjournals.org, http://www.iosrjournals.org.

Herpratiwi, Herpratiwi and Sugiyanto, Sugiyanto and Budiyanto, Budiyanto and abdul, halim Work Readiness For Vocational Education Graduation In Lampung Province. http://www.iosrjournals.org, http://www.iosrjournals.org.

I

Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method.

Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method.

Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method.

Ibrahim, Gusri and Yahya, Achmad EFEK PELUMASAN METODE MQL TERHADAP KWALITAS PERMUKAAN BENDA KERJA MAGNESIUM. Jurnal Turbo, Universitas Muhammadiyah Metro. (Submitted)

Ibrahim, Gusri Akhyar and Dhika, Arifian and Arinal, Hamni and Suryadiwansa, Harun and Yanuar, Burhanuddin ANALISA KEAUSAN PAHAT PUTAR PADA PEMBUBUTAN MAGNESIUM AZ31 MENGGUNAKAN UDARA DINGIN BERTEKANAN. Prosiding Seminar Nasional Teknik Mesin Indonesia di ITS.

Ibrahim, Gusri Akhyar and Hamni, Arinal and Bagus, Purnomo and Suryadiwansa, Harun and Yanuar, Burhanuddin The Machined Surface of Magnesium AZ31 After Rotary Turning at Air Cooling Condition. The Machined Surface of Magnesium AZ31 After Rotary Turning at Air Cooling Condition.

Indra Mamad, Gandidi A Comparison of Activated Natural Zeolite and Kaolin as a Catalyst in the Isothermal-Catalytic Cracking of Real MSW to Produce Bio-Oil. Journal of IOP Conferences Series: Earth and Environmental Science, - (-). pp. 1-8. ISSN 1755-1307 (In Press)

Indra Mamad, Gandidi Effect of natural zeolite and kaolin as a catalyst in the isothermal-catalytic cracking of real municipal solid waste (MSW) for bio-oil production. Journal of IOP Conferences Series: Earth and Environmental Science. ISSN 1755-1307 (In Press)

irsyad, muhammad and Wardono, Herry and Amrizal, Amrizal Karakteristik Perpindahan Panas Alat Penukar Kalor Berisi Material Fasa Berubah Pada Proses Pembekuan. In: SEMINAR NASIONAL HASIL PENELITIAN SAINS, TEKNIK DAN APLIKASI INDUSTRI, 19 Oktober 2018, Bandar Lampung.

M

Mohammad, Badaruddin and Chaur, Jeng Wang and Herry, Wardono and Dwi, Asmi High Temperature Oxidation of Low Carbon Steel with and without an Al Coating in an Atmosphere Containing Burning Ethanol. In: ICOME 2017. (In Press)

Mohammad, Badaruddin and Tomi, Riza and Zulhanif, zulhanif The Effect of Diffusion Treatment on the Mechanical Properties of HotDip Aluminum Coating on AISI P20 Steel. In: ICOME 2018, 7-8 Oktober 2017, Surabaya. (In Press)

Mohammad, Badaruddin and zulhanif, Zulhanif and Harnowo, Supriadi Low Cycle Fatigue Properties of Extruded 6061-T6 Aluminum Alloy. In: SENTEN 2018, 4-5 Juli 2018, Palembang. (Submitted)

P

Panuju, Yahya and Tanti, Novri and Kristiawan, Yohanes Pendeteksian Fitur Lubang Tembus pada Model 3D untuk Pembuatan Alur Pahat Pengeboran. Jurnal Mechanical, 3 (2). pp. 1-7. ISSN 2087-1880

S

Savetlana, Shirley and Sugiyanto, Sugiyanto and nurpratama, nurpratama The loading effect of sugarcane powder on the tensile property of glass fibre/sugarcane powder/polymer hybrid composite. IOP Publishing, Journal of Physics: Conference Series.

Sena, Mahendra and Fahmi, Fatra and Akhmad, Riszal PENGHEMAT BAHAN BAKAR DENGAN MENGGUNAKAN PIPA KATALIS METODE HYDROCARBON CRACK SYSTEM GANDA PADA SEPEDA MOTOR 4 TAK 160 CC. Gorontalo Journal of Infrastructure and Science Engineering, 2 (2). pp. 1-7. ISSN 2614-4638

Sinaga, Jorfri Boike and Suudi, Ahmad and Khonaifi, M. Aang and Rahman, Milia and Sugiman, - Perancangan Alat Pengujian Model Turbin Air Ultra Low Head untuk Sistem Pembangkit Listrik Tenaga Mikro Hidro (PLTMH). Prosiding Seminar nasional Siger 2017. (Submitted)

Sinaga, Jorfri Boike and Tanti, Novri and Erwiyantoro, Sutran Perancangan Model Sistem Pembangkit Listrik Menggunakan Turbin Aliran Silang. Prosiding Seminar Nasional Hasil Penelitian Sains, Teknik, dan Aplikasi Industri 2019. (In Press)

Sinaga, Jorfri Boike and Tanti, Novri and Suudi, Ahmad Development of a Model of Hydro Electric Power Generation Suitable for Low Head. Proceeding of SEMIRATA International Conference on Science and Technology (SEMIRATA ICST) 2018. (Submitted)

Sugiyanto, Sugiyanto and Badaruddin, Mohammad DEGRADATION OF MILD STEEL IN ETHANOL BURNING ENVIRONMENT: OXIDATION KINETICS AND MICROSTRUCTURAL ASPECT. https://www.geomatejournal.com/.

Sugiyanto, Sugiyanto and Badaruddin, Mohammad and Herpratiwi, Herpratiwi and Slamet, Untung and Sabarudin, Sabarudin The Influence of Learning Motivation on the Learning Outcomes of Vocational Students at Lampung University. SERSC Australia, http://sersc.org/journals/index.php/IJAST/article/view/8649.

Sugiyanto, Sugiyanto and Badaruddin, Mohammad and Herpratiwi, Herpratiwi and untung, slamet and Sabarudin, Sabarudin The Influence of Learning Motivation on the Learning Outcomes of Vocational Students at Lampung University. SERSC Australia, http://sersc.org/journals/index.php/IJAST/article/view/8649.

Sugiyanto, Sugiyanto and Nafrizal, Nafrizal and shirley, savetlana and Irza, Sukmana PELATIHAN PENGEMBANGAN KOMPETENSI PROFESIONAL TEKNISI LABORATORIUM FAKULTAS TEKNIK UNIVERSITAS LAMPUNG. fakultas teknik. (Unpublished)

Sukmana, Irza Bioactive Polymer Scaffold For Fabrication of Vascularized Engineering Tissue. Laporan Reviewer Publikasi.

Sukmana, Irza EFFECT OF MECHANICAL AND BIOPHYSICAL PROPERTIES OF FIBRIN GEL ON MICROVASCUAL DEVELOPMENT IN A THREE-DIMENSONAL ANGIOGENESIS ASSAY. Laporan Reviewer Publikasi.

Sukmana, Irza THE EFFECT OF SENSITIZATION TEMPERATURE ON STRESS CORROSION CRACKING OF STAINLESS STEEL AISI 304 IN SULPHATE ACID ENVIRONMENT. Laporan Reviewer Publikasi.

Sukmana, Irza Las Gesek (Friction Welding) Logam Tidak Sejenis (Dissimilar Metals) Magnesium AZ-31 Terhadap Aluminum AL-13. Laporan Reviewer Publikasi.

Sukmana, Irza Microvascular Guidance: A Challenge to Support the Development of Vascularised Tissue Engineering Construct. Laporan Reviewer Publikasi.

Sukmana, Irza Modulation of Fibrin Gel Extracellular Matrix Properties by Fibrinogen and Thrombin Concentrations for Angiogenesis Assay. Laporan Reviewer Publikasi.

Sukmana, Irza PENINGKATAN PENGETAHUAN DAN KEMAMPUAN DASAR PENGELASAN MAJU (ADVANCED WELDING) SISWA SEKOLAH MENENGAH KEJURUAN NEGERI (SMKN)1 SEPUTIH AGUNG, KABUPATEN LAMPUNG TENGAH. PROSIDING SENAPATI SEMINAR NASIONAL PENGABDIAN KEPADA MASYARAKAT TEKNOLOGI DAN INOVASI Pengabdian Masyarakat di Era Revolusi Industri 4.0 dan Society 5.0. ISSN 2685-0427

Sukmana, Irza Peer_Review ELECTROSPUN-BASED FIBROUS SCAFFOLD FOR CARDIOVASCULAR ENGINEERING APPLICATIONS: A REVIEW. Laporan Reviewer Publikasi.

Sukmana, Irza Peer_Review Integrated Sci-Tech : Interdisciplinary Research Approach 2016. Laporan Reviewer Publikasi.

Sukmana, Irza Peer_Review Integrated Sci-Tech : The Interdisciplinary Research Approach 2015. Laporan Reviewer Publikasi.

Sukmana, Irza Peer_Review Porous Magnesium scaffold for bone implant application: A review. Laporan Reviewer Publikasi.

Sukmana, Irza Peer_Review Radiodensity Study of Hydroxyapatite Coated Porous Tantalum Implant Material of Rat Animal Model. Laporan Reviewer Publikasi.

Sukmana, Irza Peer_Review advanced bioreactor system for the implantable biomaterials testing and tissue engineering applications. Laporan Reviewer Publikasi.

Sukmana, Irza Peer_Review three-dimensional dynamic bioreactor culture system support the angiogenesis directional of human umbilical vein endothelial cells. Laporan Reviewer publikasi.

Sukmana, Irza Peer_Review_Development of Fibrin Gel-Microgroove Model For Microvascularization by Endothelial Cells. Laporan Reviewer Publikasi.

Sukmana, Irza Peer_Review_In vitro angiogenesis assay for the guidance of microvessel containing multi-cellular lumen formation. Laporan Reviewer Publikasi.

Sukmana, Irza Penelitian Koefisien Gaya Dan Energi Spesifik Proses Penggerindaan Rata Selubung Pada Baja Perkakas Vcn 150. Laporan Reviewer Publikasi.

Sukmana, Irza Pengaruh Kecepatan Putar Indentor Las Gesek Puntir (Friction Stir Welding) Terhadap Kualitas Hasil Pengelasan Alumunium 1100-H18. Laporan Reviewer Publikasi.

Sukmana, Irza Pengaruh waktu kontak terhadap kualitas sambungan hasil las gesek (Friction Welding) Magnesium AZ-31. Laporan Reviewer Publikasi.

Sukmana, Irza Radiodensity Study of Hydroxyapatite Coated Porous Tantalum Implant Material of Rat Animal Model. Advanced Materials Research., 1112. pp. 470-473. ISSN 1662-8985

Sukmana, Irza Sandwiched polymer fibre in fibrin matrices for the dictation of endothelial cells undergoing angiogenesis. Laporan Reviewer Publikasi.

Sukmana, Irza Studi Sifat Mekanik Magnesium AZ31 Hasil Proses Pengecoran Tekan (Squeeze Casting. Laporan Reviewer Publikasi.

Sukmana, Irza The effect of carbon black loading and structure on tensile property of natural rubber composite. Laporan Reviewer Publikasi.

Sukmana, Irza the effect of sintering temperature on the properties of hydroxyapatite from local limestone for bone implant application ural rubber composite. Laporan Reviewer publikasi.

Sukrnana, lrza Porous Magnesium scaffold for bone implant application: A review. Advanced Materials Research.. ISSN 1662-8985

W

Wardono, Herry and Badaruddin, Mohammad and Ginting, Simparmin Modifikasi Tungku Penggorengan Kerupuk Lempit Melalui Rancang Bangun Tungku dan Arah Semburan Api. In: Seminar Nasional Darmajaya, 25 Oktober 2017, Hotel Emersia Bandar Lampung.

Y

Yudamson, Afri and Risano, A.Yudi Eka Pengolahan Citra untuk Membedakan Wajah Asli dengan Foto Menggunakan Metode Mean Substraksi Titik. In: Seminar Nasional Inovasi, Teknologi dan Aplikasi (SeNITiA) 2018, 27 September 2018, Bengkulu.

Z

Zulhendri, Zulhendri Studi Parameter Sistem Peredam Getaran Dinamik Tipe Dual-beam. In: Seminar Nasional Tahunan Teknik Mesin XIV (SNTTM XIV).

This list was generated on Sat May 30 07:27:15 2020 WIB.