![]() | Up a level |
Amrizal, Amrizal and Yandi, P and Muhammad, Irsyad Performance comparison of single and double pass PV/T solar collectors integrated with rectangular plate fin absorber. IOP Conference Series: Materials Science and Engineering.
Amrul, Amrul and Amrizal, Amrizal Studi Eksperimental Sudut Nosel Dan Sudut Sudu Terhadap Kinerja Turbin Cross-flow. Mechanical Jurnal Ilmiah Teknik Mesin. ISSN 2087-1880
Amrul, Amrul and Muhammad, Fariz and Indra Mamad, Gandidi SIMULASI TERMAL REAKTOR TOREFAKSI KONTINU TIPE TUBULAR UNTUK PRODUKSI BAHAN BAKAR PADAT DARI SAMPAH KOTA. Prosiding Seminar Nasional Tahunan Teknik Mesin XVI tahun 2017. (In Press)
Angga, Darma P and Amrizal, Amrizal and Gusri, Akhyar Geometry Optimization of PV/T-TEG Collector under Different Operating Conditions Using CFD Simulation and Taguchi Method. ENGINEERING JOURNAL.
Arinal, Hamni and Gusri, Akhyar and ridho, ulya MENINGKATKAN KUALITAS DAN KUANTITAS KERAJINAN ASESORIS BERBAHAN BATOK KELAPA SEBAGAI PRODUK UNGGULAN DESA PALEMBAPANG KECAMATAN KALIANDA LAMPUNG SELATAN. Jurnal Pengabdian Kepada Masyarakat Ungu (, 4 (1). ISSN 2715-9558
Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Asmi, Dwi High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. https://www.ias.ac.in/article/fulltext/boms/043/0011, https://www.ias.ac.in/article/fulltext/boms/043/0011.
Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Asmi, Dwi High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. https://www.ias.ac.in/article/fulltext/boms/043/0011, https://www.ias.ac.in/article/fulltext/boms/043/0011.
Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Herry, Wardono Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. International Journal of Fatigue, 125. ISSN 406–417
Badaruddin, Mohammad and Wang, Chaur Chaur and Saputra, Yudhistyra and Khalil, Abdul Rouf Amarulloh High Temperature Corrosion of Aluminized AISI 4130 Steel with the Different Composition of NaCl/Na2SO4 Deposits. Makara Journal of Technology, 19 (2). pp. 45-50. ISSN 2355-2786
Badaruddin, Mohammad and kurniawan, RD and Sugiyanto, Sugiyanto and Pambudi, A Low Cycle Fatigue Properties of Aluminizing Coating on Cold-Drawn AISI 1018 Steel. IOP Publishing.
Bahfie, F. and Savet Lana, Shirley and Prawijaya, KMS Imam and Nurjaman, Fajar and Astuti, W. and Susanti, D Heat Treatment Technology for Stainless Steel 316(L). Progress in Physics of Metals.
Burhanuddin, Yanuar and Prayitno, Hadi Laporan Akhir Penelitian Dasar BLU UNILA - MODEL PREDIKTIF KONSUMSI ENERGI MESIN PERKAKAS ELECTRICAL DISCHARGE MACHINING (EDM). Universitas Lampung. (Unpublished)
Che Haron, Che Hassan and Ghani, Jaharah A. and Ibrahim, Gusri A. and Burhanuddin, Yanuar Effects of cutting Parameters on surface Roughness of AISI D2 in Turning Using Coated and Uncoated Carbide Tools. In: Quality in Research (QIR 2006), 6-7 September 2006, University of Indonesia, Depok.
Christwardana, Marcelinus and Handayani, Aniek Sri and Savetlana, Shirley and Lumingkewas, Riana Herlina and chalid, Mochamad Micro-Fibrillated Cellulose Fabrication from Empty Fruit Bunches of Oil Palm. Material Science Forum.
Christwardana, Marcelinus and Handayani, Aniek Sri and Savetlana, Shirley and Lumingkewas, Riana Herlina and chalid, Mochamad Micro-Fibrillated Cellulose Fabrication from Empty Fruit Bunches of Oil Palm. Material Science Forum.
DW, Hidayati and Akhmad, Riszal Bahan Ajar Geometri Analitik Berbasis Geogebra dan Kreativitas Belajar: Dapatkah Meningkatkan Kemampuan Pemecahan Masalah? NPM (Jurnal Nasional Pendidikan Matematika), 2 (3). pp. 191-206. ISSN 2549-4937
Dw, Hidayati and akhmad, riszal APAKAH ADA HUBUNGAN ANTARA KREATIVITAS BELAJAR TERHADAP KEMAMPUAN PEMECAHAN MASALAH? In: Seminar Nasional Edusainstek, Universitas Muhammadiyah Semarang (UNIMUS).
Gandidi, Indra Mamad and Susila, M Dyan and Mustofa, Ali and Pambudi, Nugroho Agung Thermal - Catalytic Cracking of Real MSW into Bio Crude Oil. Journal of the Energy Institute. ISSN 1743-9671
Gandidi, Indra Mamad and Susila, M Dyan and Pambudi, Nugroho Agung Co-cracking of real MSW into bio-oil over natural kaolin. IOP Conference Series: Earth and Environmental Science.
Gandidi, Indra Mamad and Susila, M Dyan and Pambudi, Nugroho Agung Production of valuable pyrolytic oils from mixed Municipal Solid Waste (MSW) in Indonesia using non-isothermal and isothermal experimental. Journal of Case Studies in Thermal Engineering. pp. 357-361. ISSN 2214-157X
Herpratiwi, Herpratiwi and Sugiyanto, Sugiyanto and Budiyanto, Budiyanto and abdul, halim Work Readiness For Vocational Education Graduation In Lampung Province. http://www.iosrjournals.org, http://www.iosrjournals.org.
Herpratiwi, Herpratiwi and Sugiyanto, Sugiyanto and Budiyanto, Budiyanto and abdul, halim Work Readiness For Vocational Education Graduation In Lampung Province. http://www.iosrjournals.org, http://www.iosrjournals.org.
Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method.
Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method.
Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method.
Ibrahim, Gusri and Yahya, Achmad EFEK PELUMASAN METODE MQL TERHADAP KWALITAS PERMUKAAN BENDA KERJA MAGNESIUM. Jurnal Turbo, Universitas Muhammadiyah Metro. (Submitted)
Ibrahim, Gusri Akhyar and Dhika, Arifian and Arinal, Hamni and Suryadiwansa, Harun and Yanuar, Burhanuddin ANALISA KEAUSAN PAHAT PUTAR PADA PEMBUBUTAN MAGNESIUM AZ31 MENGGUNAKAN UDARA DINGIN BERTEKANAN. Prosiding Seminar Nasional Teknik Mesin Indonesia di ITS.
Ibrahim, Gusri Akhyar and Hamni, Arinal and Bagus, Purnomo and Suryadiwansa, Harun and Yanuar, Burhanuddin The Machined Surface of Magnesium AZ31 After Rotary Turning at Air Cooling Condition. The Machined Surface of Magnesium AZ31 After Rotary Turning at Air Cooling Condition.
Indra Mamad, Gandidi A Comparison of Activated Natural Zeolite and Kaolin as a Catalyst in the Isothermal-Catalytic Cracking of Real MSW to Produce Bio-Oil. Journal of IOP Conferences Series: Earth and Environmental Science, - (-). pp. 1-8. ISSN 1755-1307 (In Press)
Indra Mamad, Gandidi Effect of natural zeolite and kaolin as a catalyst in the isothermal-catalytic cracking of real municipal solid waste (MSW) for bio-oil production. Journal of IOP Conferences Series: Earth and Environmental Science. ISSN 1755-1307 (In Press)
Irsyad, Muhammad and Amrizal, Amrizal and Yulian, Aji Muhammad and Susila, M Dyan KARAKTERISTIK PERPINDAHAN PANAS ALAT PENUKAR KALOR TIPE STAGGERED FINS BERISI MATERIAL FASA BERUBAH DARI MINYAK KELAPA PADA PROSES PEMBEKUAN. Rekayasa Mesin, 11 (2). pp. 159-164. ISSN eISSN 2477-6041
Irza, Sukmana The Improvement of Paclitaxel Cytotoxicity using Nanocellulose based Nature Resources. Journal of Engineering and Scientific Research (JESR), 1 (1). pp. 7-11. ISSN pISSN: 2685-0338; eISSN: 2685-1695
Mohammad, Badaruddin and Chaur, Jeng Wang and Herry, Wardono and Dwi, Asmi High Temperature Oxidation of Low Carbon Steel with and without an Al Coating in an Atmosphere Containing Burning Ethanol. In: ICOME 2017. (In Press)
Mohammad, Badaruddin and Tomi, Riza and Zulhanif, zulhanif The Effect of Diffusion Treatment on the Mechanical Properties of HotDip Aluminum Coating on AISI P20 Steel. In: ICOME 2018, 7-8 Oktober 2017, Surabaya. (In Press)
Mohammad, Badaruddin and zulhanif, Zulhanif and Harnowo, Supriadi Low Cycle Fatigue Properties of Extruded 6061-T6 Aluminum Alloy. In: SENTEN 2018, 4-5 Juli 2018, Palembang. (Submitted)
Panuju, Yahya and Tanti, Novri and Kristiawan, Yohanes Pendeteksian Fitur Lubang Tembus pada Model 3D untuk Pembuatan Alur Pahat Pengeboran. Jurnal Mechanical, 3 (2). pp. 1-7. ISSN 2087-1880
Savetlana, Shirley and Homma, Hiroomi and Gunawan, Fergyanto Approach to Dynamic Fracture Toughness of GFRP from Aspect of Viscoelastic and Debonding Behaviors. Regional Conference on Mechanical and Aerospace Technology Bali, ITB.
Savetlana, Shirley and Sugiyanto, Sugiyanto and nurpratama, nurpratama The loading effect of sugarcane powder on the tensile property of glass fibre/sugarcane powder/polymer hybrid composite. IOP Publishing, Journal of Physics: Conference Series.
Sena, Mahendra and Fahmi, Fatra and Akhmad, Riszal PENGHEMAT BAHAN BAKAR DENGAN MENGGUNAKAN PIPA KATALIS METODE HYDROCARBON CRACK SYSTEM GANDA PADA SEPEDA MOTOR 4 TAK 160 CC. Gorontalo Journal of Infrastructure and Science Engineering, 2 (2). pp. 1-7. ISSN 2614-4638
Sinaga, Jorfri Boike and Suudi, Ahmad and Khonaifi, M. Aang and Rahman, Milia and Sugiman, - Perancangan Alat Pengujian Model Turbin Air Ultra Low Head untuk Sistem Pembangkit Listrik Tenaga Mikro Hidro (PLTMH). Prosiding Seminar nasional Siger 2017. (Submitted)
Sinaga, Jorfri Boike and Tanti, Novri and Erwiyantoro, Sutran Perancangan Model Sistem Pembangkit Listrik Menggunakan Turbin Aliran Silang. Prosiding Seminar Nasional Hasil Penelitian Sains, Teknik, dan Aplikasi Industri 2019. (In Press)
Sinaga, Jorfri Boike and Tanti, Novri and Suudi, Ahmad Development of a Model of Hydro Electric Power Generation Suitable for Low Head. Proceeding of SEMIRATA International Conference on Science and Technology (SEMIRATA ICST) 2018. (Submitted)
Sugiyanto, Sugiyanto and Badaruddin, Mohammad DEGRADATION OF MILD STEEL IN ETHANOL BURNING ENVIRONMENT: OXIDATION KINETICS AND MICROSTRUCTURAL ASPECT. https://www.geomatejournal.com/.
Sugiyanto, Sugiyanto and Badaruddin, Mohammad and Herpratiwi, Herpratiwi and Slamet, Untung and Sabarudin, Sabarudin The Influence of Learning Motivation on the Learning Outcomes of Vocational Students at Lampung University. SERSC Australia, http://sersc.org/journals/index.php/IJAST/article/view/8649.
Sugiyanto, Sugiyanto and Badaruddin, Mohammad and Herpratiwi, Herpratiwi and untung, slamet and Sabarudin, Sabarudin The Influence of Learning Motivation on the Learning Outcomes of Vocational Students at Lampung University. SERSC Australia, http://sersc.org/journals/index.php/IJAST/article/view/8649.
Sugiyanto, Sugiyanto and Nafrizal, Nafrizal and shirley, savetlana and Irza, Sukmana PELATIHAN PENGEMBANGAN KOMPETENSI PROFESIONAL TEKNISI LABORATORIUM FAKULTAS TEKNIK UNIVERSITAS LAMPUNG. fakultas teknik. (Unpublished)
Sukmana, Irza Bioactive Polymer Scaffold For Fabrication of Vascularized Engineering Tissue. Laporan Reviewer Publikasi.
Sukmana, Irza Corresponding auhtor artikel Polimesin. Poltek Negeri Lhoksumawe.
Sukmana, Irza Corresponding author @ polimesin. Poltek Negeri Lhoksumawe.
Sukmana, Irza Corresponding author JESR irza. JESR Unila.
Sukmana, Irza Corresponding author JMachine. J Machine.
Sukmana, Irza Corresponding author artikel jmpm. UMY.
Sukmana, Irza Corresponding author artikel judul Pengaruh kedalaman las pada pengelasan gesek puntir dua mukalogam Magnesium. Univ Udayana.
Sukmana, Irza Corresponding author file J. ASET. INSTEP Publishing.
Sukmana, Irza Corresponding author irza @infotekmesin. Infotekmesin.
Sukmana, Irza Corresponding author irza jurnal TURBO. um mETRO.
Sukmana, Irza Corresponding author jttm. JTTM.
Sukmana, Irza Corresponding author title Initial Design of Forging Measuring Instrument for Application of Friction Weld. BKS PTN.
Sukmana, Irza EFFECT OF MECHANICAL AND BIOPHYSICAL PROPERTIES OF FIBRIN GEL ON MICROVASCUAL DEVELOPMENT IN A THREE-DIMENSONAL ANGIOGENESIS ASSAY. Laporan Reviewer Publikasi.
Sukmana, Irza THE EFFECT OF SENSITIZATION TEMPERATURE ON STRESS CORROSION CRACKING OF STAINLESS STEEL AISI 304 IN SULPHATE ACID ENVIRONMENT. Laporan Reviewer Publikasi.
Sukmana, Irza Las Gesek (Friction Welding) Logam Tidak Sejenis (Dissimilar Metals) Magnesium AZ-31 Terhadap Aluminum AL-13. Laporan Reviewer Publikasi.
Sukmana, Irza Microvascular Guidance: A Challenge to Support the Development of Vascularised Tissue Engineering Construct. Laporan Reviewer Publikasi.
Sukmana, Irza Modulation of Fibrin Gel Extracellular Matrix Properties by Fibrinogen and Thrombin Concentrations for Angiogenesis Assay. Laporan Reviewer Publikasi.
Sukmana, Irza PENINGKATAN PENGETAHUAN DAN KEMAMPUAN DASAR PENGELASAN MAJU (ADVANCED WELDING) SISWA SEKOLAH MENENGAH KEJURUAN NEGERI (SMKN)1 SEPUTIH AGUNG, KABUPATEN LAMPUNG TENGAH. PROSIDING SENAPATI SEMINAR NASIONAL PENGABDIAN KEPADA MASYARAKAT TEKNOLOGI DAN INOVASI Pengabdian Masyarakat di Era Revolusi Industri 4.0 dan Society 5.0. ISSN 2685-0427
Sukmana, Irza Peer_Review ELECTROSPUN-BASED FIBROUS SCAFFOLD FOR CARDIOVASCULAR ENGINEERING APPLICATIONS: A REVIEW. Laporan Reviewer Publikasi.
Sukmana, Irza Peer_Review Integrated Sci-Tech : Interdisciplinary Research Approach 2016. Laporan Reviewer Publikasi.
Sukmana, Irza Peer_Review Integrated Sci-Tech : The Interdisciplinary Research Approach 2015. Laporan Reviewer Publikasi.
Sukmana, Irza Peer_Review Porous Magnesium scaffold for bone implant application: A review. Laporan Reviewer Publikasi.
Sukmana, Irza Peer_Review Radiodensity Study of Hydroxyapatite Coated Porous Tantalum Implant Material of Rat Animal Model. Laporan Reviewer Publikasi.
Sukmana, Irza Peer_Review advanced bioreactor system for the implantable biomaterials testing and tissue engineering applications. Laporan Reviewer Publikasi.
Sukmana, Irza Peer_Review three-dimensional dynamic bioreactor culture system support the angiogenesis directional of human umbilical vein endothelial cells. Laporan Reviewer publikasi.
Sukmana, Irza Peer_Review_Development of Fibrin Gel-Microgroove Model For Microvascularization by Endothelial Cells. Laporan Reviewer Publikasi.
Sukmana, Irza Peer_Review_In vitro angiogenesis assay for the guidance of microvessel containing multi-cellular lumen formation. Laporan Reviewer Publikasi.
Sukmana, Irza Penelitian Koefisien Gaya Dan Energi Spesifik Proses Penggerindaan Rata Selubung Pada Baja Perkakas Vcn 150. Laporan Reviewer Publikasi.
Sukmana, Irza Pengaruh Kecepatan Putar Indentor Las Gesek Puntir (Friction Stir Welding) Terhadap Kualitas Hasil Pengelasan Alumunium 1100-H18. Laporan Reviewer Publikasi.
Sukmana, Irza Pengaruh waktu kontak terhadap kualitas sambungan hasil las gesek (Friction Welding) Magnesium AZ-31. Laporan Reviewer Publikasi.
Sukmana, Irza Radiodensity Study of Hydroxyapatite Coated Porous Tantalum Implant Material of Rat Animal Model. Advanced Materials Research., 1112. pp. 470-473. ISSN 1662-8985
Sukmana, Irza Sandwiched polymer fibre in fibrin matrices for the dictation of endothelial cells undergoing angiogenesis. Laporan Reviewer Publikasi.
Sukmana, Irza Studi Sifat Mekanik Magnesium AZ31 Hasil Proses Pengecoran Tekan (Squeeze Casting. Laporan Reviewer Publikasi.
Sukmana, Irza The effect of carbon black loading and structure on tensile property of natural rubber composite. Laporan Reviewer Publikasi.
Sukmana, Irza the effect of sintering temperature on the properties of hydroxyapatite from local limestone for bone implant application ural rubber composite. Laporan Reviewer publikasi.
Sukrnana, lrza Porous Magnesium scaffold for bone implant application: A review. Advanced Materials Research.. ISSN 1662-8985
Tarkono, Tarkono and Hadi Ali, HA Similarity : PENAMBAHAN SERAT TANDAN KOSONG KELAPA SAWIT (TKKS) DALAM RANGKA MEREDUKSI BERAT KOMPOSIT PAPAN SEMEN. Jurnal Rotor, Universitas Jember.
Tri C Wahyudi, TCW and Tarkono, Tarkono and Irza, Sukmana and Fauzi Ibrahim, FI and Yanuar, Burhanuddin and Fethma M Nor, FMN Similarity : Effect of Squeeze Casting on Mechanical and Microstructure Properties of Magnesium Alloy AZ31. AVIA International Journal of Aviation Science and Engineering, Institut Teknologi Bandung.
Wardono, Herry and Badaruddin, Mohammad and Ginting, Simparmin Modifikasi Tungku Penggorengan Kerupuk Lempit Melalui Rancang Bangun Tungku dan Arah Semburan Api. In: Seminar Nasional Darmajaya, 25 Oktober 2017, Hotel Emersia Bandar Lampung.
Yudamson, Afri and Risano, A.Yudi Eka Pengolahan Citra untuk Membedakan Wajah Asli dengan Foto Menggunakan Metode Mean Substraksi Titik. In: Seminar Nasional Inovasi, Teknologi dan Aplikasi (SeNITiA) 2018, 27 September 2018, Bengkulu.
Zulhanif, Hanif and Harnowo Supriadi, Nowo and Sugiyanto, Sugiyanto and Nafrizal, Nafrizal PERLAKUAN PANAS PRECIPITATION HARDENING DENGAN VARIASI TEMPERATUR ARTFICIAL AGING TERHADAP SIFAT MEKANIS MATERIAL Al-2024. Proceeding Seminar Sinta UNILA, seminar sinta UNILA.
Zulhendri, Zulhendri Studi Parameter Sistem Peredam Getaran Dinamik Tipe Dual-beam. In: Seminar Nasional Tahunan Teknik Mesin XIV (SNTTM XIV).
irsyad, muhammad Getaran pada pipa percabangan tipe T akibat fluktuasi aliran dua fasa gas - cair. Jurnal Teknik Mesin ITS, 11 (3). pp. 173-181. ISSN 1411-9471
irsyad, muhammad and Susila, M Dyan and Hartanto, Mey Pengaruh Pemasangan Photovoltaic Pada Dinding Bangunan Terhadap Temperatur Ruangan. Prosiding Seminar Nasional - XII Rekayasa dan Aplikasi Teknik Mesin di Industri, XII. TKE 23-TKE 28. ISSN 1693-3168
irsyad, muhammad and Wardono, Herry and Amrizal, Amrizal Karakteristik Perpindahan Panas Alat Penukar Kalor Berisi Material Fasa Berubah Pada Proses Pembekuan. In: SEMINAR NASIONAL HASIL PENELITIAN SAINS, TEKNIK DAN APLIKASI INDUSTRI, 19 Oktober 2018, Bandar Lampung.
irsyad, muhammad and akmal, muhammad and Susila, M Dyan and Amrizal, Amrizal and Amrul, Amrul Heat Transfer Characteristics of Paraffin in Staggered Fins Heat Exchanger for the Cooling Process to Room Cooling Applications. IOP Conference Series: Earth and Environmental Science. ISSN doi:10.1088/1755-1315/520/1/012009
irsyad, muhammad and harmen, harmen Potensi Penggunaan Material Fasa Berubah Untuk Aplikasi Penyejuk Ruangan Di Indonesia. In: Prosiding Seminar Nasional ke 3 Rekayasa Material, Sistem manufaktur dan Energi 2016.