University of Lampung | LPPM-UNILA Institutional Repository (LPPM-UNILA-IR)

Group by: Item Type | No Grouping

Number of items: 94.

Article

Sugiyanto, Sugiyanto and Badaruddin, Mohammad and Sugiyanto, Sugiyanto (2023) Perilaku fatik baja kekuatan tinggi AISI 4140 pada kondisi austempering. ARMATUR.

Badaruddin, Mohammad (2023) Increased toughness and low cycle fatigue in ASSAB 709 m steel through normalizing process. AIP Conference Proceedings 2689, 070044 (2023).

Badaruddin, Mohammad (2023) Effect of single and double quenching-tempering heat treatments on microstructures and tensile strength of AISI 4140 in annealing condition. AIP Conference Proceedings.

Badaruddin, Mohammad and Bakti, Bima and Prasetya, Budi and Sugiyanto, Sugiyanto (2021) Effect of austempering temperatures on surface hardness of AISI 4140 steel. IOP Conf. Series: Materials Science and Engineering, 1173 (1). pp. 1-7. ISSN 1757-899X

Asmi, Dwi and Zulfia, Anne and Badaruddin, Mohammad (2021) Improvement High Purity Biogenic Amorphous SiO2 Derived from Rice Husk Ash: Synthesis and its Characterizat. Materials Science Forum, 1029 (1). pp. 175-180. ISSN 1662-9752

Mardiana, Dian and Asmi, Dwi and Badaruddin, Mohammad and Zulfia, Anne (2021) Preparation of Synthetic β-Wollastonite Produced from Amorphous SiO2 Bamboo Leaf Ash and Meretix Meretix Shell. Materials Science Forum, 1029. pp. 167-179. ISSN 1662-9752

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Asmi, Dwi (2020) High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. Bulletin of Materials Science volume, 43. p. 11. ISSN 0973-7669

Sugiyanto, Sugiyanto and Badaruddin, Mohammad (2020) DEGRADATION OF MILD STEEL IN ETHANOL BURNING ENVIRONMENT: OXIDATION KINETICS AND MICROSTRUCTURAL ASPECT. International Journal of GEOMATE, 19 (73). pp. 82-90. ISSN 2186-2982 (P), 2186-2990 (O)

Badaruddin, Mohammad and Kurniawan, Rio Dicki and Sugiyanto, Sugiyanto and Pambudi, Ambar (2020) IOP Conference Series: Materials Science and EngineeringPAPER • OPEN ACCESSLow Cycle Fatigue Properties of Aluminizing Coating on Cold-DrawnAISI 1018 Steel. Materials Science and Engineering,, 807. 012019. ISSN 1757-899X

Badaruddin, Mohammad and Sugiyanto, Sugiyanto (2020) Low Cycle Fatigue Properties of Aluminizing Coating on Cold- Drawn AISI 1018 Steel. IOP Conference Series: Materials Science and Engineering.

Badaruddin, Mohammad and Wardono, Herry and Zulhanif, zulhanif and Supriadi, Harnowo and Salimor, Mario (2020) Experimental investigation of mechanical properties of cold-drawn AISI 1018 steel at high-temperature steady-state conditions. Journal of Materials Research and Technology, 9 (2). pp. 1893-1904. ISSN 2238-7854

Badaruddin, Mohammad (2020) Similarity check result for An_experimental_investigation_of_the_mechanical_st. Construction and Building Materials, 232 (3). p. 117193. ISSN 0950-0618 (Unpublished)

Badaruddin, Mohammad and Sugiri, Agus and Wang, Chaur Chaur (2020) An experimental investigation of the mechanical strength of cold-drawn AISI 1018 steel under high-temperature steady- and transient-state conditions. Construction and Bulding Materials, 232. p. 117193. ISSN 0950-0618

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Asmi, Dwi (2019) High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. Bulletin of Materials Science, 43 (1). 0-11. ISSN 0973-7669

Badaruddin, Mohammad and Akbari, Rizki and Harnowo, Supriadi (2019) Increasing of mild steel ST 41 grade hardness by carburizing treatment using an active carbon from coconut shell and CaCO3 catalyst from chicken eggshell. Prosiding SNTTM XVIII, 1 (1). pp. 1-6. ISSN 2623-0313

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Herry, Wardono and Andoko, Andoko and Chaur, Jeng Wang and Rivai, Abu Khalid (2019) Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. International Journal of Fatigue, 125. pp. 406-417. ISSN 0142-1123

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Wardono, Herry and Andoko, Andoko and Wang, Chaur Chaur and Rivai, Abu Khalid (2019) Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. International Journal of Fatigue, 125. pp. 406-417. ISSN 0142-1123

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Herry, Wardono and Andoko, Andoko and Chaur, Jeng Wang and Abu, Khalid Rivai (2019) Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. andoko.ft@um.ac.id, 125. pp. 406-417. ISSN 0142-1123

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Asmi, Dwi (2019) The resistance of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850°C. Materials Research Express, 6 (8). pp. 1-8. ISSN 2053-1591

Badaruddin, Mohammad and zulhanif, Zulhanif and Supriadi, Harnowo (2019) Low Cycle Fatigue Properties of Extruded 6061-T6 Aluminum Alloy. Journal of Physics: Conference Series, 1198 (3). pp. 1-6. ISSN 1742-6596 (In Press)

Akmal, Jamiatul and Badaruddin, Mohammad and Ismoyo, Muh Kresna and Yuwono, Suripto D. (2019) Optimization of matrix compositions of Al2O3, SiO2, Caolin, and CaO on the mechanical properties of a geopolymer composite with short carbon fiber. IOP Conf. Series: Materials Science and Engineering, 602 (01207). pp. 1-7. ISSN 17578981

Badaruddin, Mohammad and Kuncoro, Purnadi Sri and Suudi, Ahmad and Sugiyanto, Sugiyanto (2018) Low Cycle Fatigue Analysis of an Annealed AISI 4140 Steel. Seminar Nasional Tahunan Teknik Mesin 2018, 18. pp. 56-61. ISSN 2623-0313

Badaruddin, Mohammad and Chaur, Jeng Wang and Herry, Wardono and Dwi, Asmi (2018) High temperature oxidation of low carbon steel with and without an Al coating in an atmosphere containing burning ethanol. AIP Conference Proceedings, 1983 (1063). 050002-1-050002-7. ISSN 978-0-7354-1699-4

Badaruddin, Mohammad and Tomi, Riza and Zulhanif, zulhanif (2018) The effect of diffusion treatment on the mechanical properties of hot-dip aluminum coating on AISI P20 steel. AIP Conference Proceedings, 1983. 050004-1. ISSN 978-0-7354-1699-4

Badaruddin, Mohammad and Yudi Eka Rosano, Ahmad and Suudi, Ahmad (2017) Peningkatan Efisiensi Termal Tungku Biomasa Untuk Proses Pengeringan Biji Kakao di Desa Wiyono Kabupaten Pesawaran Propinsi Lampung. Jurnal Sakai Sambayan, 11 (1). pp. 1-10. ISSN 2550-1089

Badaruddin, Mohammad and Risano, A.Yudi Eka and Wardono, Herry and Asmi, Dwi (2017) Hot-Corrosion of AISI 1020 Steel in a Molten NaCl/Na2SO4 Eutectic at 700°C. AIP Conference Proceedings, 1788. pp. 1-9. ISSN 978-0-7354-1452-5

Badaruddin, Mohammad and Chaur, Jeng Wang and Tarkono, Tarkono and Wardono, Herry and Asmi, Dwi (2016) High-temperature oxidation behavior of aluminized AISI 4130 steel. AIP Conference Proceedings, 1711 (040002). pp. 1-6. ISSN 0094-243X

Badaruddin, Mohammad and Suharno, Suharno and Wijaya, Hanif Ari (2014) Isothermal Oxidation Behavior of Aluminized AISI 1020 Steel at the Temperature of 700 oC. Jurnal Teknik Mesin-Universitas Kristen Petra, 15 (1). pp. 15-19. ISSN 1410-9867

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Suudi, Ahmad (2013) Hot Corrosion of Aluminized 1020 Steel with NaCl Deposit. Advanced Materials Research, 789. pp. 463-466. ISSN 1662-8985

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Suudi, Ahmad (2012) Influence of water-vapor on the isothermal oxidation behavior of aluminized AISI 1020 steel at elevated temperatures. Procedia Engineering, 50. pp. 649-657. ISSN 1877-7058

Badaruddin, Mohammad and Suudi, Ahmad (2011) Effect of Prestrain on Delayed Fracture of Stainless Steel 304. Jurnal Teknik Mesin ITS, 11 (3). pp. 173-179. ISSN 1411-9471

Badaruddin, Mohammad and Sugiyanto, Sugiyanto (2005) Efek Shot Peening Terhadap Korosi Retak Tegang (SCC) Baja Karbon Rendah dalam Lingkungan Air Laut. Jurnal Teknik Mesin, 7 (1). pp. 11-14. ISSN 1410-9867

Badaruddin, Mohammad and Wang, Chaur Chaur and Saputra, Yudhistyra and Khalil, Abdul Rouf Amarulloh High Temperature Corrosion of Aluminized AISI 4130 Steel with the Different Composition of NaCl/Na2SO4 Deposits. Makara Journal of Technology, 19 (2). pp. 45-50. ISSN 2355-2786

Badaruddin, Mohammad and Risano, A.Yudi Eka and Wardono, Herry and Asmi, Dwi Hot-corrosion of AISI 1020 steel in a molten NaCl/Na2SO4 eutectic at 700°C. Hot-corrosion of AISI 1020 steel in a molten NaCl/Na2SO4 eutectic at 700°C, 1788 (1). 030066-1-030066-9. ISSN AIP Conference Proceedings 1788, 030066 (2017)

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Herry, Wardono Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. International Journal of Fatigue, 125. ISSN 406–417

Monograph

Badaruddin, Mohammad (2023) Fatik siklus rendah dan perambatan retak fatik. Discussion Paper. Deepublish.

Conference or Workshop Item

Wardono, Herry and Badaruddin, Mohammad and Ginting, Simparmin (2018) PENINGKATAN PRODUKSI GULA MERAH UKM DESA PURWOREJO PESAWARAN LAMPUNG MELALUI RANCANG BANGUN TUNGKU SK32. In: Seminar Nasional Pengabdian Masyarakat Universitas Terbuka, SENMASTER 2018, 30 Oktober 2018, Universitas Terbuka Convention Center. (In Press)

Badaruddin, Mohammad and Kurniawan, R and Sugiyanto, Sugiyanto and Pambudi, A Low Cycle Fatigue Properties of Aluminizing Coating on Cold-Drawn AISI 1018 Steel. In: IOP Conference Series: Materials Science and Engineering.

Wardono, Herry and Badaruddin, Mohammad and Ginting, Simparmin Modifikasi Tungku Penggorengan Kerupuk Lempit Melalui Rancang Bangun Tungku dan Arah Semburan Api. In: Seminar Nasional Darmajaya, 25 Oktober 2017, Hotel Emersia Bandar Lampung.

Patent

P00202215064 (2022) PROSES AUSTEMPERING BAJA AISI 4140 UNTUK MENINGKATKAN KEKUATAN TARIK DAN KETAHANAN PERAMBATAN RETAK FATIK. P00202215064.

Mohammad Badaruddin, S.T., M.T., Ph.D (2018) PROSES PELAPISAN ALUMINIUM CELUP PANAS (HOT DIP ALUMINIZING COATING) PADA BAJA AISI P20. P00201810556.

LPPM UNILA (2018) PROSES PELAPISAN ALUMINIUM CELUP PANAS (HOT DIP ALUMINIZING COATING) PADA BAJA AISI P20. 0.

Experiment

Helmi, Masdar and Noorhidana, Vera A. and Badaruddin, Mohammad and Akmal, Jamiatul (2021) SIFAT MEKANIK DAN FATIGUE PANEL FEROSEMEN PRACETAK UNTUK APLIKASI KONSTRUKSI ATAP. [Experiment] (Unpublished)

Other

Sugiyanto, Sugiyanto and Badaruddin, Mohammad (2020) Similarity DEGRADATION OF MILD STEEL IN ETHANOL BURNING ENVIRONMENT: OXIDATION KINETICS AND MICROSTRUCTURAL ASPECT. GEOMATE International Society, International Journal of GEOMATE.

Badaruddin, Mohammad and Wardono, Herry and Zulhanif, zulhanif and Harnowo, Supriadi and Salimor, Mario (2020) Similarity check result for Experimental investigation of mechanical properties of cold-drawn AISI 1018 steel at high-temperature steady-state conditions. Elsevier, Journal of Materials Research and Technology.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_An experimental investigation of the mechanical strength of cold-drawn AISI 1018 steel under high-temperature steady- and transient-state conditions. Elsevier, Construction and Building Materials.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Experimental investigation of mechanical properties of cold-drawn AISI 1018 steel at high-temperature steady-state conditions. Elsevier, Journal of Materials Research and Technology.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_High Temperature Corrosion of Aluminized AISI 4130 Steel with the Different Composition of NaCl-Na2SO4 Deposits. Directorate of Research and Community Services, Universitas Indonesia, Makara Journal of Technology.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. Indian Academy of Sciences-Springer, Bulletin of Materials Science.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_High-temperature oxidation behavior of aluminized AISI 4130 steel. American Institute of Physics Publishing Ltd, AIP Conference Proceeeding: ISFAP 2015.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Hot-corrosion of AISI 1020 steel in a molten NaCl-Na2SO4 eutectic at 700°C. American Institute of Physics Publishing Ltd., AIP Conference Proceeeding: ICESNANO 2016.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. Elsevier, International Journal of Fatigue.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Increasing of mild steel ST 41 grade hardness by carburizing treatment using an active carbon from coconut shell and CaCO3 catalyst from chicken eggshell. Penerbit Jurusan Teknik Mesin, Universitas Trisakti-Jakarta, Prosiding SNTTM 2019.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Isothermal Oxidation Behavior of Aluminized AISI 1020 Steel at the Temperature of 700 oC. The Institute of Research & Community Outreach - Petra Christian University, Jurnal Teknik Mesin- Univ. Kristen Petra.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Low Cycle Fatigue Analysis of an Annealed AISI 4140 Steel. Penerbit Program Studi Teknik Mesin-Universitas Nusa Cendana-Kupang, Prosiding SNTTM 2018.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Low Cycle Fatigue Properties of Extruded 6061-T6 Aluminum Alloy. IOP Publishing Ltd., Journal of Physics: Conference Series-SENTEN 2018.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_The effect of diffusion treatment on the mechanical properties of hot-dip aluminum coating on AISI P20 steel. American Institute of Physics Publishing Ltd, AIP Conference Proceeeding: ICOME 2017.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_The resistance of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850°C. IOP Publishing Ltd., Material Research Express. (Unpublished)

Badaruddin, Mohammad (2020) The resistance of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850°C. IOP Publishing Ltd., Material Research Express. (Unpublished)

Sugiyanto, Sugiyanto and Badaruddin, Mohammad and Herpratiwi, Herpratiwi and Slamet, Untung (2020) The Influence of Learning Motivation on the Learning Outcomes of Vocational Students at Lampung University. International Journal of Advanced Science and Technology.

Badaruddin, Mohammad (2020) Similarity check result: An experimental investigation of the mechanical strength of cold-drawn AISI 1018 steel under high-temperature steady- and transient-state conditions. Elsevier, Construction and Building Materials. (Unpublished)

Badaruddin, Mohammad (2019) Similarity check results; Experimental investigation of mechanical properties of cold-drawn AISI 1018 steel at high-temperature steady-state conditions. Elsevier, Journal of Materials Research and Technology. (Unpublished)

Badaruddin, Mohammad (2019) Similarity check result: High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. Indian Academy of Sciences-Springer, Bulletin of Materials Science volume. (Unpublished)

Badaruddin, Mohammad and Zulhanif, zulhanif and Supriadi, Harnowo and Ruwanto, Ruwanto (2019) MENINGKATKAN KEMAMPUAN PENGELASAN SISWA SMK BLK BANDAR LAMPUNG DENGAN PELATIHAN PENGELASAN HORISONTAL PADA PELAT BAJA. LPPM UNILA. (Unpublished)

Badaruddin, Mohammad (2019) Similarity check result: Increasing of mild steel ST 41 grade hardness by carburizing treatment using an active carbon from coconut shell and CaCO3 catalyst from chicken eggshell. BKSTM, Prosiding SNTTM 2019. (Unpublished)

Badaruddin, Mohammad (2019) Similarity check result: Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. Elsevier, International Journal of Fatigue. (Unpublished)

Badaruddin, Mohammad (2019) Similarity check result: The resistence of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850 C. IOP Publishing Ltd., Material Research Express. (Unpublished)

Badaruddin, Mohammad (2019) Similarity check result: Low cycle fatigue properties of extruded 6061-T6 aluminum alloy. IOP, Journal of Physics: Conference Series-SENTEN 2018. (Unpublished)

Wardono, Herry and Badaruddin, Mohammad and Simparmin, Br Ginting (2018) Peningkatan Produksi Gula Merah UKM Desa Purworejo Kecamatan Negerikaton, Kabupaten Pesawaran Melalui Desain dan Rancang Bangun Tungku Biomassa Hemat Bahan Bakar. LPPM UNILA. (Unpublished)

Zulhanif, zulhanif and Supriadi, Harnowo and Badaruddin, Mohammad and Ruwanto, Ruwanto (2018) PELATIHAN PENGUJIAN KETANGGUHAN BAHAN DAN KEKERASAN BAHAN LOGAM PADA SISWA SMK 2 MEI BANDAR LAMPUNG DI LABORATORIUM MATERIAL TEKNIK MESIN UNILA. LPPM UNILA. (Unpublished)

Badaruddin, Mohammad (2018) Similarity check results: Low cycle fatigue analysis of an annealed AISI 4140 steel. Penerbit Program Studi Teknik Mesin-Universitas Nusa Cendana-Kupang, SNTTM 2018. (Unpublished)

Badaruddin, Mohammad (2018) Similarity check result: The effect of diffusion treatment on the mechanical properties of hot-dip aluminumc oating on AISI P20 steel. American Institute of Physics Publishing Ltd, AIP Conference Proceeeding: ICOME 2017. (Unpublished)

Wardono, Herry and Badaruddin, Mohammad and Simparmin, Br Ginting (2017) IbM Peningkatan Produksi Kerupuk Lempit di Kelurahan Pringsewu Utara Kabupaten Pringsewu: Modifikasi Tungku Double Burner dan Pemanfaatan Gas Sisa Pembakaran Untuk Pengeringan Bahan Dasar Kerupuk. LPPM UNILA. (Unpublished)

Badaruddin, Mohammad (2017) Similarity check result: Hot-corrosion of AISI 1020 steel in a molten NaCl/Na2SO4 eutectic at 700°C. American Institute of Physics, ICESNANO 2016. (Unpublished)

Badaruddin, Mohammad and Eka Risano, A. Yudi and Suudi, Ahmad (2016) IbM Peningkatan Produktifitas Kakao Melalui Rancang Bangun Tungku Biomassa Hemat Bahan Bakar. LPPM UNILA. (Unpublished)

Badaruddin, Mohammad and Chaur Jeng Wang, CJW and Wardono, Herry and Tarkono, Tarkono and Asmi, Dwi (2016) Similarity : High-Temperature Oxidation Behavior of Aluminized AISI 4130 Steel. AIP Publishing, 1305 Walt Whitman Rd Suite 110 Melville, NY 11747, US.

Badaruddin, Mohammad (2016) Similarity check result: High-temperature oxidation behavior of aluminized AISI 4130 steel. American Institute of Physics Publishing Ltd., AIP Conference Proceeeding: ISFAP 2015. (Unpublished)

Badaruddin, Mohammad and Risano, A.Yudi Eka and Wardono, Herry and Asmi, Dwi (2016) Hot-corrosion of AISI 1020 steel in a molten NaCl/Na2SO4 eutectic at 700°C. American Institute of Physics, International Conference on Engineering, Science and Nanotechnology 2016 (ICESNANO 2016), AIP Conference Proceedings.

Wardono, Herry and Badaruddin, Mohammad and Simparmin, Br Ginting (2015) IbM PENGEMBANGAN TUNGKU HEMAT BAHAN BAKAR DAN KOKOH UNTUK INDUSTRI GULA MERAH DESA TEGALSARI KECAMATAN GADINGREJO, KABUPATEN PRINGSEWU,PROPINSI LAMPUNG. LPPM UNILA. (Unpublished)

Badaruddin, Mohammad (2015) Similarity check result: High Temperature Corrosion of Aluminized AISI 4130 Steel with the Different Composition of NaCl/Na2SO4 Deposits. Directorate of Research and Community Services, Universitas Indonesia, Makara Journal of Technology. (Unpublished)

Badaruddin, Mohammad (2014) Similarity check result: Isothermal Oxidation Behavior of Aluminized AISI 1020 Steel at the Temperature of 700 C. Institute of Research and Community Outreach Petra Christian University, Jurnal Teknik Mesin- Univ. Kristen Petra. (Unpublished)

Sugiyanto, Sugiyanto and Badaruddin, Mohammad DEGRADATION OF MILD STEEL IN ETHANOL BURNING ENVIRONMENT: OXIDATION KINETICS AND MICROSTRUCTURAL ASPECT. https://www.geomatejournal.com/.

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Asmi, Dwi High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. https://www.ias.ac.in/article/fulltext/boms/043/0011, https://www.ias.ac.in/article/fulltext/boms/043/0011.

Sugiyanto, Sugiyanto and Badaruddin, Mohammad and Herpratiwi, Herpratiwi and untung, slamet and Sabarudin, Sabarudin The Influence of Learning Motivation on the Learning Outcomes of Vocational Students at Lampung University. SERSC Australia, http://sersc.org/journals/index.php/IJAST/article/view/8649.

Sugiyanto, Sugiyanto and Badaruddin, Mohammad and Herpratiwi, Herpratiwi and Slamet, Untung and Sabarudin, Sabarudin The Influence of Learning Motivation on the Learning Outcomes of Vocational Students at Lampung University. SERSC Australia, http://sersc.org/journals/index.php/IJAST/article/view/8649.

Sugiyanto, Sugiyanto and Badaruddin, Mohammad and Herpratiwi, Herpratiwi and Slamet, Untung and Sabarudin, Sabarudin The Influence of Learning Motivation on the Learning Outcomes of Vocational Students at Lampung University. International Journal of Advanced Science and Technology.

Badaruddin, Mohammad and kurniawan, RD and Sugiyanto, Sugiyanto and Pambudi, A Low Cycle Fatigue Properties of Aluminizing Coating on Cold-Drawn AISI 1018 Steel. IOP Publishing.

Badaruddin, Mohammad and kurniawan, R D and Sugiyanto, Sugiyanto and Pambudi, A Low Cycle Fatigue Properties of Aluminizing Coating on Cold-Drawn AISI 1018 Steel. IOP Publishing.

This list was generated on Thu Nov 21 22:58:45 2024 WIB.

Export as	Atom RSS 1.0 RSS 2.0