.

., Martinus and Djausal, Gita Paramita and Sulistiyanti, Sri Ratna and Muhammad, Meizano Ardhi and Telaumbanua, Mareli (2021) Tebakak Leaves Plates as an Eco-friendly Disposable Plates: Cultural Roots, Technology and People Transformations. In: 2nd International Indonesia Conference on Interdisciplinary Studies (IICIS 2021), 26-27 October 2021.

., Martinus and Telaumbanua, Mareli and Andrianto, Rifqi Rahma and Muhammad, Meizano Ardhi and Ferbangkara, Sony (2021) Design and Construction of Duku Sorting System Based on Size Using Microcontroller on Conveyor Work. International Journal of Electronics and Communications System, 1 (2). ISSN ISSN: 2798-2610

A

Abdul Hakim Md, Yusop and Ahmed, Alsakkaf and Mohammed Rafiq Abdul, Kadir and Irza, Sukmana and Hadi, Nur (2021) Corrosion of porous Mg and Fe scaffolds: a review of mechanical and biocompatibility responses of Local Lampung Province. Taylor & Francis, Corrosion Engineering, Science and Technology.

Ahmad, Yonanda and Amrizal, Amrizal (2021) Karakteristik Kolektor Surya Pelat Datar Aliran Spiral Menggunakan Metode Simulasi CFD. Open Science and Technology, 1 (1). ISSN 2776-1681

Akmal, Jamiatul and Lubis, Asnawi and Tanti, Novri and Nuryanto, Nuryanto and Murti, Adam Wisnu (2021) The TLP 2-DOF as an alternative model for extreme wave application. Kapal: Jurnal Ilmu Pengetahuan dan Teknologi Kelautan, 18 (2). pp. 80-87. ISSN 2301-9069

B

Badaruddin, Mohammad and Bakti, Bima and Prasetya, Budi and Sugiyanto, Sugiyanto (2021) Effect of austempering temperatures on surface hardness of AISI 4140 steel. IOP Conf. Series: Materials Science and Engineering, 1173 (1). pp. 1-7. ISSN 1757-899X

Bonar, Asybel and Pasek, Ari Darmawan and harmen, harmen (2021) Design and performance analysis of 1KW ORC turboexpander with R245fa as working fluid. IOP Conference Series: Materials Science and Engineering, 1109 (012049). pp. 1-10.

E

E, Surojo and J, Anindito and F, Paundra: and A. R, Prabowo and E. P, Budiana and N, Muhayat and Mohammad, Badaruddin and Triyono, Triyono (2021) Effect of water flow and depth on fatigue crack growth rate of underwater wet welded low carbon steel SS400. Open Engineering, 11 (1). pp. 329-338. ISSN 2391-5439

F

Fauzi, Ibrahim and Irza, Sukmana (2021) Application of magnesium alloys in orthopedic implant. Department Of Mechanical Engineering, Lhokseumawe State Polytecnic, Jurnal Polimesin.

H

Hadi, Hadi and Rio, Ariestia Pradipta and Anisa, Ulya Darajat and Rahayu, Lestari (2021) PENDAMPINGAN MANAJEMEN ENERGI SKALA RUMAH TANGGA KEPADA ANGGOTA KOPERASI MELATI JAYA SEBAGAI PARTISIPASI PEREMPUAN DALAM PENCAPAIAN AKSI PERUBAHAN IKLIM KOTA BANDAR LAMPUNG. LPPM Unila, LPPM Unila. (Unpublished)

Hadi, Prayitno and Angga, Darma Prabowo and Angelia, Eka Salsabillah and Rizal, Khairudin (2021) Peer Review, Jurnal Initial Investigation of Heat Transfer Characteristics of Rotary Dryer with Finned Vacuum Chamber System. Open Science and Technology. (Submitted)

Hadi, Prayitno and Angga, Darma Prabowo and Angelia, Eka Salsabillah and Rizal, Khairudin (2021) Peer Review, Jurnal Initial Investigation of Heat Transfer Characteristics of Rotary Dryer with Finned Vacuum Chamber System. Open Science and Technology. (Submitted)

Hadi, Prayitno and Sugiri, Agus (2021) PENDAMPINGAN MANAJEMEN ENERGI SKALA RUMAH TANGGA KEPADA ANGGOTA KOPERASI KUNTUM BUNGA SEBAGAI PARTISIPASI PEREMPUAN DALAM PENCAPAIAN AKSI PERUBAHAN IKLIM KOTA BANDAR LAMPUNG. LPPM Unila, LPPM Unila. (Unpublished)

Hadi, Prayitno and Tety Rachmawati, Tety (2021) KAJIAN KARAKTERISTIK PENGERING HIBRID V-SHAPE SOLAR COLLECTOR – INDIRECT GAS BURNER PADA PENGERINGAN CABAI. LPPM Unila, LPPM Unila. (Unpublished)

Hamni, Arinal and Panuju, Yahya and Ambarwati, Dwi Asri Siti (2021) Understanding consumers’ behaviour for reducing environmental and social impact through sustainable product - A Study case of vehicles usage in Indonesia design – A Study case of vehicles usage in Indonesia. IOP Conference Series: Earth and Environmental Science, 739 (012052). pp. 1-10. ISSN 1755-1315

Harmen, Harmen and Zulhanif, Zulhanif and Yonanda, Ahmad (2021) Kajian Numerik Karakteristik Perpindahan Panas Konveksi Fluida Organik Pada Kondisi Tekanan Superkritis. LPPM Universitas Lampung. (Unpublished)

Hendronursito, Yusup and Sukmana, Irza and Risano, A.Yudi Eka (2021) Study of the potential utilization of local Lampung Province resources in development of dental implant bioceramics. IOP Conf. Series: Materials Science and Engineering, 1173 (012026). ISSN 1757-899X

I

Irsyad, Muhammad and Anam, Khoiril and Risano, A.Yudi Eka and Amrul, Amrul (2021) PENGGUNAAN MATERIAL FASA BERUBAH UNTUK MENJAGA KESEGARAN IKAN. Teknologi, 13 (2). pp. 153-159. ISSN 2460-0288

Irza, Sukmana (2021) Corrosion of porous Mg and Fe scaffolds: a review of mechanical and biocompatibility responses. The International Journal of Corrosion Processes and Corrosion Control, 56 (4). pp. 310-326. ISSN 1478422X

Irza, Sukmana (2021) Simulation of Heat Transfer Characteristics on Palm Oil as Electrical Insulating Material Using Finite Difference Method. In: ELTICOM 2021, Medan.

Irza, Sukmana (2021) Simulation of Heat Transfer Characteristics on Palm Oil as Electrical Insulating Material Using Finite Difference Method. In: ELTICOM 2021, Medan, USU.

Irza, Sukmana and Fauzi, Ibrahim and Ahmad Yudi Eka, Risano (2021) The influence of friction stir welding tool shape on quality of AZ31 Magnesium welding product. Program Studi Teknik Mesin Universitas Muhamadiyah Metro, Turbo: Jurnal Program Studi Teknik Mesin.

Irza, Sukmana and Hafiz Favian, Gustin and Tarkono, Tarkono (2021) Pengaruh kedalaman las pada pengelasan gesek puntir dua muka logam Magnesium AZ31. Department of Mechanical Engineering, University of Udayana, Jurnal Energi dan Manufaktur.

L

Lubis, Asnawi and Akmal, Jamiatul and Putra, Muhammad Rahardian and Tanti, Novri and Suudi, Ahmad (2021) Stress Assessment on Layered Bonding Tube under Hydrostatic External Pressure. In: Seminar Nasional Tahunan Teknik Mesin (SNTTM) ke-19, 13-14 Oktober 2021, Universitas Muhammadiyah Yogyakarta, Yogyakarta. (In Press)

Lubis, Asnawi and Suudi, Ahmad (2021) STRESS ASSESSMENT PADA LAYERED BONDING TUBE DENGAN BEBAN TEKANAN EKSTERNAL. Fakultas Teknik Unila. (Unpublished)

M

Martinus, Martinus and Telaumbanua, Mareli and Andrianto, Rifqi Rahma and Muhammad, Meizano Ardhi and Ferbangkara, Sony (2021) Design and Construction of Duku Sorting System Based on Size Using Microcontroller on Conveyor Work. International Journal of Electronics and Communications System, 1 (2). pp. 77-84.

N

Nugraha, Nurcahya and Akmal, Jamiatul and Lubis, Asnawi (2021) Analisis Dinamik Tabung Kontinu dengan Metode Beda Hingga. Jurnal Mechanical, 12 (2). pp. 57-64. ISSN 2087-1880

P

Panuju, Yahya and Martinus, Martinus and Riszal, Akhmad and Kobayashi, Hideki (2021) The Effect of Sustainable Design Strategies on Resource Consumption – Home Laundry Activities in Indonesia. In: EcoDesign International Symposium 2021, 1 -3 Desember 2021, Japan.

Panuju, Yahya and Suudi, Ahmad and Ibrahim, Gusri (2021) Identifying Constraints Of Sustainable Product Development In Indonesia. International Journal of scientific and technology research, 10 (4). pp. 343-349. ISSN 2277-8616

Prayitno, Hadi and Lestari, Rahayu and Hardilla, Dini and Hesti, Hesti (2021) Assistance for waste management of the Jasmine Jaya Cooperative in supporting sustainable city. Yumary : Jurnal Pengebdian Kepada Masyarakat, 01 (03). pp. 151-162. ISSN 2746-0576

Prayitno, Hadi and Prabowo, Angga D and Salsabillah, Angelia E and Khairudin, Rizal (2021) Initial Investigation of Heat Transfer Characteristics of Rotary Dryer with Finned Vacuum Chamber System. Open Science and Technology, 01 (01). pp. 121-129. ISSN 2776-1681

R

Riszal, Akhmad and Martinus, Martinus (2021) Analisis Drag Force dan Aliran Fluida pada Desain Mobil Listrik Green Campus UNILA Berdasarkan Kecepatan. Open Science and Technology, 1 (2). pp. 181-189. ISSN P-ISSN 2776-169X dan E-ISSN 2776-1681

S

Samosir, Ahmad Saudi and Akhmad Riszal, Riszal (2021) The effect analysis of wind speed variation to the horizontal axis wind turbine design with Q-blade. In: ICSTAR 2020, Bandar Lampung, Indonesia.

Sinaga, Jorfri Boike and Susila, M Dyan and Prayitno, Hadi (2021) PELATIHAN PEMBUATAN POMPA TANPA MOTOR (HYDRAULIC RAMPUMP) UNTUK IRIGASI PERTANIAN MASYARAKAT PEKON TIGA JAYA KECAMATAN SEKINCAU LAMPUNG BARAT. Jurnal Pengabdian kepada Masyarakat Sakai Sembayan, 5 (3). pp. 170-175. ISSN e-ISSN 2550-1089

Sinaga, Jorfri Boike and Tanti, Novri and Admiral, Randa and Yessy, Christina (2021) Development of Testing Equipment of Gravitational Water Vortex Turbine to Support Implementation the Laboratory Work. Proceedings of the International Conference on Science, Technology and Interdisciplinary Research (IC-STAR) 2021. ISSN 2352-5401 (Submitted)

Sukmana, Irza (2021) Application of magnesium alloys in orthopedic implant. Jurnal Polimesin, 19 (2). pp. 182-187. ISSN 16935462

Sukmana, Irza and Risano, A.Yudi Eka (2021) Study of the potential utilization of local Lampung Province resources in development of dental implant bioceramics. IOP Conference Series: Materials Science and Engineering, 2021 (1173). pp. 1-7. ISSN 1757-899X

Suryadiwansa, Harun and Arinal, Hamni and Gusri, Akhyar and Yanuar, Burhanuddin (2021) Sistem Produksi Bersih dan Terintegrasi Untuk Pengolahan Kopi Lampung untuk Meningkatkan Daya Saing dan Mutu Produk. Jurnal Teknologi dan Inovasi Industri, 2 (1). ISSN ISSN 2722-0184, e-ISSN 2722-0192

Suudi, Ahmad and Lubis, Asnawi and Tanti, Novri and Akmal, Jamiatul (2021) PEMANFAATAN ILMU MEKFLUD DALAM KONSTRUKSI SISTEM PERPIPAAN DISTRIBUSI AIR RUMAH TANGGA UNTUK WARGA MUDA DAN PEKERJA BANGUNAN DI DUSUN WONOKARTO KELURAHAN WONODADI KECAMATAN GADINGREJO KABUPATEN PRINGSEWU LAMPUNG. Fakultas Teknik Unila. (Unpublished)

U

Ulin, Herlina and Muhammad, Yusuf and Ika, Kartika and Yanuar Zulardiansyah, Arif and Irza, Sukmana (2021) Pengaruh Variasi Temperatur Sinter Terhadap Kualitas Produksi Magnesium AZ31 Dengan Tube Furnace. Department of Mechanical of Engineering, Faculty of Engineering, Universitas Muhammadiyah Yogyakarta, JMPM (Jurnal Material dan Proses Manufaktur).

Y

Yanuar Z., Arief and Mohd. Shuffy, Suhaidi and Naemah, Mubarakah and May, Raksmey and Irza, Sukmana and Rosyid Ridlo Al, Hakim (2021) Simulation of Heat Transfer Characteristics on Palm Oil as Electrical Insulating Material Using Finite Difference Method. IEEE, 5th International Conference on Electrical, Telecommunication and Computer Engineering (ELTICOM) 2021.

Yusuf, Hendronursito and Irza, Sukmana and Ahmad Yudi Eka, Risano (2021) Study of the potential utilization of local Lampung Province resources in development of dental implant bioceramics. IOP Publishing Ltd, IOP Conf. Series: Materials Science and Engineering International Conference on Science, Technology, and Interdisciplinary Research (IC-STAR 2020).