![]() | Up a level |
Akhmad, Riszal (2019) Analysis Effect Ratio of Rotation Rotors and Tip Speed Ratio (TSR) On The Variations of Distance Rotors Counter Rotating Wind Turbine (CRWT). Journal of Physics: Conference Series, 1273 (012060). pp. 1-6. ISSN Print : 1742-6588 Online : 1742-6596
Akhmad, Riszal (2019) PENGHEMAT BAHAN BAKAR DENGAN MENGGUNAKAN PIPA KATALIS METODE HYDROCARBON CRACK SYSTEM GANDA PADA SEPEDA MOTOR 4 TAK MEGAPRO. In: SNATIF 2018, Univeritas Muria Kudus.
Akmal, Jamiatul and Badaruddin, Mohammad and Ismoyo, Muh Kresna and Yuwono, Suripto D. (2019) Optimization of matrix compositions of Al2O3, SiO2, Caolin, and CaO on the mechanical properties of a geopolymer composite with short carbon fiber. IOP Conf. Series: Materials Science and Engineering, 602 (01207). pp. 1-7. ISSN 17578981
Badaruddin, Mohammad (2019) Similarity check result: High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. Indian Academy of Sciences-Springer, Bulletin of Materials Science volume. (Unpublished)
Badaruddin, Mohammad (2019) Similarity check result: Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. Elsevier, International Journal of Fatigue. (Unpublished)
Badaruddin, Mohammad (2019) Similarity check result: Low cycle fatigue properties of extruded 6061-T6 aluminum alloy. IOP, Journal of Physics: Conference Series-SENTEN 2018. (Unpublished)
Badaruddin, Mohammad (2019) Similarity check result: The resistence of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850 C. IOP Publishing Ltd., Material Research Express. (Unpublished)
Badaruddin, Mohammad (2019) Similarity check results; Experimental investigation of mechanical properties of cold-drawn AISI 1018 steel at high-temperature steady-state conditions. Elsevier, Journal of Materials Research and Technology. (Unpublished)
Badaruddin, Mohammad and Akbari, Rizki and Harnowo, Supriadi (2019) Increasing of mild steel ST 41 grade hardness by carburizing treatment using an active carbon from coconut shell and CaCO3 catalyst from chicken eggshell. Prosiding SNTTM XVIII, 1 (1). pp. 1-6. ISSN 2623-0313
Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Asmi, Dwi (2019) High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. Bulletin of Materials Science, 43 (1). 0-11. ISSN 0973-7669
Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Asmi, Dwi (2019) The resistance of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850°C. Materials Research Express, 6 (8). pp. 1-8. ISSN 2053-1591
Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Herry, Wardono and Andoko, Andoko and Chaur, Jeng Wang and Abu, Khalid Rivai (2019) Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. andoko.ft@um.ac.id, 125. pp. 406-417. ISSN 0142-1123
Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Herry, Wardono and Andoko, Andoko and Chaur, Jeng Wang and Rivai, Abu Khalid (2019) Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. International Journal of Fatigue, 125. pp. 406-417. ISSN 0142-1123
Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Wardono, Herry and Andoko, Andoko and Wang, Chaur Chaur and Rivai, Abu Khalid (2019) Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. International Journal of Fatigue, 125. pp. 406-417. ISSN 0142-1123
Badaruddin, Mohammad and Zulhanif, zulhanif and Supriadi, Harnowo and Ruwanto, Ruwanto (2019) MENINGKATKAN KEMAMPUAN PENGELASAN SISWA SMK BLK BANDAR LAMPUNG DENGAN PELATIHAN PENGELASAN HORISONTAL PADA PELAT BAJA. LPPM UNILA. (Unpublished)
Badaruddin, Mohammad and zulhanif, Zulhanif and Supriadi, Harnowo (2019) Low Cycle Fatigue Properties of Extruded 6061-T6 Aluminum Alloy. Journal of Physics: Conference Series, 1198 (3). pp. 1-6. ISSN 1742-6596 (In Press)
Budiyanto, Prasetyo and Zulhendri, Zulhendri and Akmal, Jamiatul and Tanti, Novri and Suudi, Ahmad (2019) Perancangan mesin penghancur sekam padi dengan poros penggerak horisontal. Jurnal Teknik Mesin Indonesia, 14 (2). p. 37. ISSN 1907-350X
Burhanuddin, Yanuar and Nugraha, Ade Salfa and Maulana, Masagus Imran and Harun, Suryadiwansa and Suudi, Ahmad (2019) The design of a roasted coffee sorter system in order to control the quality of roasted coffee automatically based on the analysis of the thermographic image and color of roasted coffee. In: Seminar Nasional Tahunan Teknik Mesin (SNTTM) XVIII, 9-10 Oktober 2019, Kampus Univ. Trisakti, Jakarta.
Burhanuddin, Yanuar and Nugraha, Ade Salfa and Maulana, Masagus Imran and Harun, Suryadiwansa and Suudi, Ahmad (2019) The design of a roasted coffee sorter system in order to control the quality of roasted coffee automatically based on the analysis of the thermographic image and color of roasted coffee. In: Seminar Nasional Tahunan Teknik Mesin (SNTTM) XVIII, 9-10 Oktober 2019, Kampus Univ. Trisakti, Jakarta.
Gusri, Akhyar and Arinal, Hamni (2019) Pengaruh Parameter Pemotongan Pada Proses Bubut Ulir (Threading) Terhadap Kepresisian Geometri Ulir Magnesium Paduan AZ31. Jurnal Energi dan Manufaktur Vol. 12 No. 1, April 2019, 12 (1). pp. 1-6. ISSN ISSN: 2302-5255 (p) ISSN: 2541-5328 (e)
Gusri, Akhyar and Suryadiwansa, Harun (2019) Kekasaran permukaan pada pemesinan frais mikro Ti 6Al- 4V ELI (extra low intertitial). TURBO, 8 (2). pp. 201-207. ISSN p-ISSN: 2301-6663, e-ISSN: 2477-250X
Ibrahim, Gusri and Arinal, Hamni (2019) IMPLEMENTASI MESIN SANGRAI UNTUK MENINGKATKAN PRODUKTIFITAS TEPUNG KACANG POLONG. In: Seminar Nasional Universitas Lampung, 24 April 2019, Bandar Lampung.
Ibrahim, Gusri and Arinal, Hamni and Margaretta, Welly and Budi, Harjo (2019) PEMBUATAN DAN PENGUJIAN MESIN PENYERUT TUSUK SATE MEKANIK. SAKAI SAMBAYAN — Jurnal Pengabdian kepada Masyarakat, 3 (1). pp. 27-33.
Ibrahim, Gusri Akhyar and Yanuar, Burhanuddin (2019) ANALISIS KEPRESISISAN LOBANG BOR PADA PEMESINAN MAGNESIUM AZ31 MENGGUNAKAN METODE TAGUCHI. FLYWHEEL: JURNAL TEKNIK MESIN UNTIRTA, 5 (1). pp. 29-33.
Irza, Sukmana (2019) PENGARUH KECEPATAN TOOL PADA DISSIMILAR METAL ALUMINIUM 1100 DAN 5052 TERHADAP KUALITAS HASIL PENGELASAN DENGAN METODE LAS GESEK PUNTIR (FRICTION STIR WELDING). Machine; Jurnal Teknik Mesin Vol. 5 No. 1, Agustus 2019, 5 (1). pp. 1-7. ISSN 2581-0138
Irza, Sukmana and Shirley, Savetlana and Yanuar, Burhanudin and Mahruri Arif, Wicaksono and Hadi, Nur (2019) Fabricating and Testing of Porous Magnesium Through Powder Metallurgy Technique using TWSH (Titanium Wire Space Holder) for Biodegradable Bone Scaffold Material. Faculty of Engineering, Universitas Lampung, Journal of Engineering and Scientific Research (JESR).
Irza, Sukmana and Sugiyanto, Sugiyanto and Yudi Eka Rosano, Ahmad (2019) PENINGKATAN PENGETAHUAN DAN KEMAMPUAN DASAR PENGELASAN MAJU (ADVANCED WELDING) SISWA SEKOLAH MENENGAH KEJURUAN NEGERI (SMKN) 1 SEPUTIH AGUNG, KABUPATEN LAMPUNG TENGAH. PROSIDING SEMNAS PENGABDIAN FT SENAPATI 2019, 2019 (1). pp. 1-5. (In Press)
K, Pudyastuti and Harmen, Harmen and M, Djumantara and S, Fadhlurrahman (2019) Thermal characteristics of the X geothermal resources, and a recommendation on utilization possibility. Journal of Physics: Conference Series, 1402 (022057).
Mohammad, Badaruddin and Sugiyanto, Sugiyanto and Dwi, Asmi (2019) The resistance of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850 °C. Materials Research Express, 6.
Nugraha, Nurcahya and Lubis, Asnawi and Su'udi, Ahmad (2019) Pengaruh Beban Thermal dan Mechanical Terhadap Perilaku Nonlinier Pipa Elbow Bertekanan. Jurnal Energi dan Manufaktur, 12 (2). ISSN 2541-5328
Nugraha, Nurcahya and Lubis, Asnawi and Suudi, Ahmad (2019) Perilaku Nonlinier Pipa Elbow Bertekanan dengan Beban Termal dan In-Plane Bending. Jurnal Energi dan Manufaktur, 12 (2). pp. 82-86. ISSN 2302-5255
Paksi, Reza Mahesa and Suudi, Ahmad and Martinus, Martinus (2019) Smart lower limb prosthetic based on accelerometer and gyroscope sensor with arduino microcontroller. Jurnal Teknik Mesin Indonesia, 14 (1). pp. 5-9. ISSN 2597-7563.
Risano, A.Yudi Eka and Sinaga, Jorfri Boike and Susila, M Dyan and Irawan, Dwi (2019) PELATIHAN PEMBUATAN ALAT KOMPRESOR UDARA MINI PADA SEPEDA MOTOR SEBAGAI ALAT BANTU PENAMBAH UDARA PADA BAN BAGI GURU-GURU DAN KARYAWAN PONDOK PESANTREN NURUL IMAN DESA PURWOREJO KECAMATAN NEGERI KATON KABUPATEN PESAWARAN. PROSIDING SENAPATI SEMINAR NASIONAL PENGABDIAN KEPADA MASYARAKAT TEKNOLOGI DAN INOVASI Pengabdian Masyarakat di Era Revolusi Industri 4.0 dan Society 5.0, 1. pp. 135-139. ISSN 2685-0427
Sinaga, Jorfri Boike and Supriadi, Harnowo and Tanti, Novri (2019) PENERAPAN TEKNOLOGI POMPA TANPA MOTOR (HYDRAULIC RAM PUMP) UNTUK MEMBANTU IRIGASI PERSAWAHAN MASYARAKAT DI KELURAHAN SUMBERREJO BANDAR LAMPUNG. kompasiana. (Submitted)
Sinaga, Jorfri Boike and Tanti, Novri and Susila, M Dyan and Simarmata, Raja Aman (2019) Penerapan teknologi pompa tanpa motor (hydraulic ram pump) untuk membantu irigasi pertanian masyarakat di Sumberrejo Kecamatan Kemiling Bandar Lampung. Prosiding Seminar Nasiona lHasil Penelitian Sains, Teknik, danAplikasiIndustri 2019. (In Press)
Sugiyanto, Sugiyanto (2019) Improvement of Low-cycle fatigue resistance in ISI 4140 steel by anneling treatment. International Journal of Fatigue. ISSN 406–417
Model (2019) Panduan Diklat Pengembangan Kompetensi Profesional Berkelanjutan Dosen Vokasi. 000143532.
Sugiyanto, Sugiyanto (2019) Panduan Diklat Pengembangan Kompetensi Profesional berkelanjutan Dosen Vokasi. Hak Cipta. ISSN EC00201809588
Sugiyanto, Sugiyanto (2019) Peer Review Judul 7:Hot Corrosion of Aluminized 2010 Steel With NaCl Deposit. LPPM-Unila.
Sugiyanto, Sugiyanto (2019) The resistence of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850 C. Material Research Express, 6 (0865d6). ISSN 2053-1591
Sukmana, Irza (2019) Corresponding_Autor_Fabricating and Testing ofPorous Magnesium Through Powder Metallurgy Technique using TWSH (Titanium Wire Space Holder) for Biodegradable Bone Scaffold Material. JESR Unila.
Sukmana, Irza (2019) Peer_Review_Development of Fibrin Gel-Microgroove Model For Microvascularization by Endothelial Cells. Fakultas Teknik Unila.
Sukmana, Irza (2019) Peer_Review_In Vitro Angiogenesis Assay for the Guidance of Microvessel Containing Multi-Cellular Lumen Formation. Fakultas Teknik Unila.
Sukmana, Irza and Savetlana, Shirley and Burhanuddin, Yanuar and Wicaksono, Mahruri A. and Nur, Hadi (2019) Fabricating and Testing of Porous Magnesium Through Powder Metallurgy Technique using TWSH (Titanium Wire Space Holder) for Biodegradable Bone Scaffold Material. Journal of Engineering and Scientific Research (JESR), 1 (2). pp. 78-83. ISSN pISSN268-0338 ; eISSN 268-1695
Suudi, Ahmad and Tanti, Novri and Akmal, Jamiatul and Hasymi, Zulhendri and Budiyanto, Prasetio (2019) Perancangan mesin penghancur sekam padi dengan poros penggerak horizontal. Jurnal Teknik Mesin Indonesia, 14 (2). pp. 37-41. ISSN ISSN (Print): 1907-350X; e-ISSN:2597-7563
Tarkono, Tarkono and Nandang, Nandang (2019) Buku : Manufaktur Bahan Non Logam. CV Anugrah Utama Raharja, Bandar Lampung. ISBN 978-623-211-176-9 (In Press)
Wardono, Herry and Naiborhu, Theofillius Gustavo and Risano, A.Yudi Eka and Susila E.S., M. Dyan and Amrizal, Amrizal (2019) Comparison of Utilization of Physical Activated Coconut Shell and Rice Husk Charcoal to Save Fuel Consumption of a 4-Stroke Gasoline Motorcycle. In: Seminar Nasional Tahunan Teknik Mesin XVIII, 9-10 Oktober 2019, Hotel Aston Kartika Grogol. (In Press)
Wardono, Herry and Naiborhu, Theofillius Gustavo and Risano, A.Yudi Eka and Susila E.S., M. Dyan and Amrizal, Amrizal (2019) Comparison of Utilization of Physical Activated Coconut Shell and Rice Husk Charcoal to Save Fuel Consumption of a 4-Stroke Gasoline Motorcycle. In: SNTTM XVIII 2019 Universitas Trisakti, 9-10 Oktober 2019, Aston Kartika Grogol Hotel Jakarta.
Wibowo, Agung and Lubis, Asnawi and Akmal, Jamiatul (2019) Analisis kekuatan lifting lug pada bejana tekan silinder horizontal. In: SEMINAR NASIONAL TAHUNAN TEKNIK MESIN XVIII (SNTTM 2019 -XVII), 9-10 Oktober 2019, Universitas Trisakti, Jakarta.
shirley, savetlana and Eko, Pratama and Riski, Pratama and Nafrizal, Nafrizal and Aniek, Handayani and Mochammad, Chalid and Adi, Cifriadi (2019) The tensile strength of natural rubber coagulated with mengkudu fruit (Morinda Citrifolia) and tawas (Al2(SO4)3).nH2O). Prosiding SNTTM XVIII. ISSN 2623-0313
shirley, savetlana and Eko, Pratama and Riski, Pratama and Nafrizal, Nafrizal and Aniek, Handayani and Mochammad, Chalid and Adi, Cifriadi (2019) The tensile strength of natural rubber coagulated with mengkudu fruit (Morinda Citrifolia) and tawas (Al2(SO4)3).nH2O). BKSTM.
shirley, savetlana and irza, sukmana and nafrizal, nafrizal (2019) PELATIHAN PEMBUATAN KOMPOSIT KARET/KARBON HITAM KEPADA PETANI KARET DI DESA KOTAWAI, KECAMATAN KASUI, KABUPATEN WAY KANAN, LAMPUNG. sakai sambayang, 3 (3).
shirley, savetlana and sugiyanto, sugiyanto and angga, Nurpratama (2019) The loading effect of sugarcane powder on the tensile property of glass fibre/sugarcane powder/polymer hybrid composite. Journal of Physics: Conference Series, 1376 (1). ISSN Print : 1742-6588 Online : 1742-6596
shirley, savetlana and sugiyanto, sugiyanto and angga, Nurpratama (2019) The loading effect of sugarcane powder on the tensile property of glass fibre/sugarcane powder/polymer hybrid composite. IOP Publishing.