Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 67.

Article

., Martinus and Susilo, Adi and Telaumbanua, Mareli and Muhammad, Meizano Ardhi (2020) RANCANG BANGUN SISTEM PENGHITUNG JUMLAH DAN MASSA BIJI KOPI BERBASIS MIKROKONTROLER PADA KONVEYOR SABUK. BAROMETER, 5 (2). pp. 267-271. ISSN 1979-889X

Adi Sembiring, Janwira and Wardono, Herry and Eka Risano, A. Yudi (2020) Pemanfaatan Campuran Zeolit dan Arang Sekam Teraktifasi Fisik Sebagai Filter Udara Untuk Meningkatkan Akselerasi Mesin Sepeda Motor Bensin 4-Langkah. Jurnal Ilmiah Teknik Mesin, 8 (2). pp. 29-33. ISSN 2337 4780

Badaruddin, Mohammad (2020) Similarity check result for An_experimental_investigation_of_the_mechanical_st. Construction and Building Materials, 232 (3). p. 117193. ISSN 0950-0618 (Unpublished)

Badaruddin, Mohammad and Kurniawan, Rio Dicki and Sugiyanto, Sugiyanto and Pambudi, Ambar (2020) IOP Conference Series: Materials Science and EngineeringPAPER • OPEN ACCESSLow Cycle Fatigue Properties of Aluminizing Coating on Cold-DrawnAISI 1018 Steel. Materials Science and Engineering,, 807. 012019. ISSN 1757-899X

Badaruddin, Mohammad and Sugiri, Agus and Wang, Chaur Chaur (2020) An experimental investigation of the mechanical strength of cold-drawn AISI 1018 steel under high-temperature steady- and transient-state conditions. Construction and Bulding Materials, 232. p. 117193. ISSN 0950-0618

Badaruddin, Mohammad and Sugiri, Agus and Wang, Chaur Chaur (2020) An experimental investigation of the mechanical strength of cold-drawn AISI 1018 steel under high-temperature steady- and transient-state conditions. Construction and Building Materials, 232. p. 117193. ISSN 0950-0618

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Asmi, Dwi (2020) High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. Bulletin of Materials Science, 43 (1). pp. 1-8. ISSN 0973-7669

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Asmi, Dwi (2020) High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. Bulletin of Materials Science volume, 43. p. 11. ISSN 0973-7669

Badaruddin, Mohammad and Wardono, Herry and Zulhanif, zulhanif and Supriadi, Harnowo and Salimor, Mario (2020) Experimental investigation of mechanical properties of cold-drawn AISI 1018 steel at high-temperature steady-state conditions. Journal of Materials Research and Technology, 9 (1). pp. 1-12. ISSN 2238-7854

Badaruddin, Mohammad and Wardono, Herry and Zulhanif, zulhanif and Supriadi, Harnowo and Salimor, Mario (2020) Experimental investigation of mechanical properties of cold-drawn AISI 1018 steel at high-temperature steady-state conditions. Journal of Materials Research and Technology, 9 (2). pp. 1-12. ISSN 2238-7854

Badaruddin, Mohammad and Wardono, Herry and Zulhanif, zulhanif and Supriadi, Harnowo and Salimor, Mario (2020) Experimental investigation of mechanical properties of cold-drawn AISI 1018 steel at high-temperature steady-state conditions. Journal of Materials Research and Technology, 9 (2). pp. 1893-1904. ISSN 2238-7854

Dwiastanto, L. Patria Giri and Burhanuddin, Yanuar and Ibrahim, Gusri (2020) Optimasi nilai keausan pahat dan kekasaran permukaan benda kerja terhadap parameter pemesinan milling dengan benda kerja magnesium menggunakan kombinasi metode taguchi dan grey relational analysis. JURNAL TURBO, 9 (1). pp. 6-17. ISSN 2477-250X

Gusri, Akhyar and Arinal, Hamni and Puji, Sri Maria (2020) Correlation of spindle speed on the outer thread precision of magnesium AZ31. Jurnal Teknik Mesin Indonesia, 15 (1). pp. 11-17. ISSN 2597-7563

Ibrahim, Gusri and Arinal, Hamni and lusmelia, afriani (2020) Pembuatan Mesin Cetak Pelet Pakan Ternak Berbahan Baku Onggok Untuk Kelompok Peternak Sapi di Terbanggi Subing Lampung Tengah. Dharma Raflesia Jurnal Ilmiah Pengembangan dan Penerapan IPTEKS, 18 (2). pp. 269-279. ISSN 2615-4544

Ibrahim, Gusri and Hamni, Arinal (2020) Analisis Keausan Pahat pada Pemesinan Bor Magnesium AZ31 Menggunakan Metode Taguchi. JURNAL TEKNIK MESIN – ITI, 4 (1). pp. 6-11. ISSN 2548-3854

Ibrahim, Gusri and Suryadiwansa, Harun (2020) MEKANISME PEMBENTUKAN BURR PADA PEMESINAN FRAIS MIKRO Ti 6Al- 4V ELI DALAM KEADAAN KERING. Rekayasa Mesin, 11 (3). pp. 307-312. ISSN eISSN 2477-6041

Ibrahim, Gusri and Yanuar, Burhanuddin (2020) BURR FORMATION ANALYSIS WHEN MICRO MILLING Ti-6Al-4V ELI USING END MILL CARBIDE INSERT. Palarch’s Journal Of Archaeology Of Egypt/Egyptology, 17 (9). pp. 4061-4067. ISSN 567-214x

Ibrahim, Gusri and Yanuar, Burhanuddin (2020) Kajian Simulasi Fem 3D : Keausan Pahat Twist Drill Pada Pemesinan Bor Mikro Material Ti-6Al-4V. Manutech : Jurnal Teknologi Manufaktur, 12 (2). pp. 93-101. ISSN 2621-3397

Ignatius, Gian Roni and Sugiri, Agus and Suudi, Ahmad (2020) Perancangan dan Perhitungan Sudu Turbin Angin Horisontal NACA 4412 Variasi Sudut Serang Menggunakan Simulasi BEM. Jurnal Ilmiah Teknik Mesin, 8 (2). pp. 34-37. ISSN 2337 4780

Indra Mamad, Gandidi and Purnawan, Purnawan and Amrul, Amrul (2020) PYROLYTIC LIQUID FUEL FROM RMSW USING LONG CATALYZER DOWNSTREAM IN STAGE PYROLYSIS. International Journal of Advanced Science and Technology, 29 (6s). pp. 77-82. ISSN 2005-4238 IJAST

Irsyad, Muhammad and Susila, M Dyan and Amrizal, Amrizal and Amrul, Amrul and Akmal, Mardho (2020) Heat Transfer Characteristics of Paraffin in Staggered Fins Heat Exchanger for the Cooling Process to Room Cooling Applications. IOP Conference Series: Earth and Environmental Science, 520 (1). pp. 1-6. ISSN 1755-1315

Irsyad, Muhammad and Tobing, N.A.H.L and Susila, M Dyan (2020) Pemanfaatan material fasa berubah untuk mempertahankan kesegaran sayuran. TURBO, 9 (2). ISSN p-ISSN: 2301-6663, e-ISSN: 2477-250X

Irza, Sukmana (2020) PENGARUH KECEPATAN TOOL PADA DISSIMILAR METAL ALUMINIUM 1100 DAN 5052 TERHADAP KUALITAS HASIL PENGELASAN DENGAN METODE LAS GESEK PUNTIR (FRICTION STIR WELDING). Machine; Jurnal Teknik Mesin Vol. 6 No. 2,Oktober 2020, 6 (2). pp. 1-7. ISSN 2581-0138

Kurniawan, Tata and Wardono, Herry and Susila, M Dyan (2020) PENGARUH PEMANFAATAN FILTER UDARA BERBAHAN ZEOLIT TERAKTIVASI FISIK MENGGUNAKAN Microwave TERHADAP AKSELERASI SEPEDA MOTOR BENSIN 4-LANGKAH. FEMA Jurnal Ilmiah Teknik Mesin, 8 (2). pp. 1-5. ISSN 2337-4780

Martinus, Martinus and Haryanto, Agus and Triyono, Sugeng and Telaumbanua, Mareli (2020) Development of Teak Leaf Plate Molding Machine for Producing Plastic Alternative Products. Development of Teak Leaf Plate Molding Machine for Producing Plastic Alternative Products. (Submitted)

Pasmadi, Dewa Anom and Lubis, Asnawi and Tanti, Novri and Hasymi, Zulhendri (2020) Kaji Eksperimental Peredam Dinamik dan Energy Harvesting pada Sistem Pegas Massa dengan DVA Tipe Dual Strip. Jurnal Mechanical, 11 (1). pp. 13-18. ISSN 2087-1880

Renardy, B. Niko and Wardono, Herry and Susila, M Dyan (2020) Aktifasi Campuran Zeolit Alam Dan Flyash Batubara Menggunakan Microwave Sebagai Filter Udara Untuk Meningkatkan Akselerasi Mesin Sepeda Motor Bensin 4-Langkah. FEMA Jurnal Ilmiah Teknik Mesin, 8 (2). pp. 25-28. ISSN 2337-4780

Savetlana, Shirley and Lubis, Asnawi and Lingga, Aditya and Muhammad, Irfan and Dedi, Siadari and Gunawan, Efendi and Muhammad, Yusuf and Hel, Jefri (2020) Fly ash/phenolic resin composite for brake pad application: Fabrication, materials and thermal properties. COMPOSITES THEORY AND PRACTICE, 3-4. pp. 95-101. ISSN 2299-128X

Sinaga, Jorfri Boike and Azhar, - and Suudi, Ahmad and sugman, sugman (2020) PELATIHAN PEMBUATAN POMPA TANPA MOTOR (HYDRAULIC RAM PUMP) UNTUK IRIGASI PERSAWAHAN MASYARAKAT KELURAHAN SUMBERREJO KECAMATAN KEMILING BANDAR LAMPUNG. PROSIDING SENAPATI SEMINAR NASIONAL PENGABDIAN KEPADA MASYARAKAT TEKNOLOGI DAN INOVASI Pengabdian Masyarakat di Era Revolusi Industri 4.0 dan Society 5.0. pp. 159-165. ISSN 2685-0427

Sinaga, Jorfri Boike and Su'udi, Ahmad and Susila, M Dyan and Sugiman, Sugiman (2020) Kajian Eksperimental Unjuk Kerja Turbin Helik dengan Bentuk Sudu NACA 0033 untuk Model Sistem Pembangkit Listrik. Seminar Nasional Hasil Penelitian & Pengabdian Kepada Masyarakat 2020 (SENANTIAS 2020), 1 (1). ISSN 2774-4833

Sinaga, Jorfri Boike and Suudi, Ahmad and Susila, M Dyan (2020) EXPERIMENTAL STUDY ON PERFORMANCE OF HELICAL TURBINE WITH BLADE PROFILE OF NACA 0033 FOR ELECTRIC GENERATION SYSTEM MODEL. Prosiding SENANTIAS 2020. ISSN 978-623-90150-0-8 (In Press)

Sinaga, Jorfri Boike and Suudi, Ahmad and Susila, M Dyan and Sugiman, Sugiman (2020) Kajian eksperimental unjuk kerja model sistem pembangkit listrik menggunakan turbin helik bentuk sudu NACA 0033. Prosiding SINTA 2020. (In Press)

Sinaga, Jorfri Boike and Tanti, Novri and Susila, M Dyan (2020) Development of Testing Equipment of Hydrokinetic Turbine Model to Support Implementation of the Laboratory Work. IOP Conference Series: Materials Science and Engineering, 852.

Sinaga, Jorfri Boike and Tarkono, Tarkono and Susila, M Dyan and Sugiman, Sugiman (2020) PELATIHAN PEMBUATAN POMPA TANPA MOTOR (HYDRAULIC RAM PUMP) UNTUK MEMBANTU MENGAIRI AREAL PERTANIAN MASYARAKAT DESA HARAPAN JAYA KECAMATAN WAY RATAI KABUPATEN PESAWARAN. SAKAI SAMBAYAN — Jurnal Pengabdian kepada Masyarakat, 4 (1). pp. 60-65. ISSN ISSN 2550-1089

Sinaga, Jorfri Boike and Tarkono, Tarkono and Susila, M Dyan and Sugiman, Sugiman (2020) PELATIHAN PEMBUATAN POMPA TANPA MOTOR (HYDRAULIC RAM PUMP) UNTUK MEMBANTU MENGAIRI AREAL PERTANIAN MASYARAKAT DESA HARAPAN JAYA KECAMATAN WAY RATAI KABUPATEN PESAWARAN. Sakai Sembayan, 4 (1). pp. 60-65. ISSN 2550-1089

Sugiyanto, Sugiyanto and Badaruddin, Mohammad (2020) DEGRADATION OF MILD STEEL IN ETHANOL BURNING ENVIRONMENT: OXIDATION KINETICS AND MICROSTRUCTURAL ASPECT. International Journal of GEOMATE, 19 (73). pp. 82-90. ISSN 2186-2982 (P), 2186-2990 (O)

Sugiyanto, Sugiyanto and Mohammad, Badaruddin and Herpratiwi, Herpratiwi (2020) The Influence of Learning Motivation on the Learning Outcomes of Vocational Students at Lampung University. International Journal of Advanced Science and Technology, 29 (05). pp. 133-140. ISSN 2005-4238 IJAST

Sukmana, Irza and Tarkono, Tarkono and Yudi Eka Rosano, Ahmad and Sugiyanto, Sugiyanto (2020) PENINGKATAN NILAI TAMBAH DAN SISTEM PENGOLAHAN PANGAN PASKA PANEN JAMUR TIRAM PUTIH DI SENTRA JAMUR PONDOK PESANTREN DARUSSALAM, NATAR. PROSIDING SEMINAR NASIONAL PENELITIAN DAN PENGABDIAN KEPADA MASYARAKAT UNIVERSITAS SABURAI 2020, 2020 (1). pp. 323-332. ISSN 2746 9751

irsyad, muhammad and Amrizal, Amrizal and Yulian, Aji Muhammad and Susila, M Dyan (2020) KARAKTERISTIK PERPINDAHAN PANAS ALAT PENUKAR KALOR TIPE STAGGERED FINS BERISI MATERIAL FASA BERUBAH DARI MINYAK KELAPA PADA PROSES PEMBEKUAN. Rekayasa Mesin, 11 (2). pp. 159-164. ISSN 2477-6041

Book Section

shirley, savetlana and Martinus, Martinus and Sugiyanto, Sugiyanto and Rico, Pramana (2020) BOOK CHAPTER: ILMU-ILMU TEKNIK: Kebencanaan 2019 CHAPTER: PENGARUH STRUKTUR KARBON TERHADAP KAPASITANSI KAPASITOR BERBAHAN KARBON AKTIF UNTUK APLIKASI SEBAGAI KOMPONEN SENSOR. In: ILMU-ILMU TEKNIK: Kebencanaan 2019. Kebencanaan, I (I). Universitas Lampung, pp. 1-333. ISBN 978-602-73260-3-3

Conference or Workshop Item

Eka Risano, A. Yudi and AD Prabowo, Prabowo (2020) Energetic and exergetic performance computation of coalfired steam power plant using IAPWS IF-97 formulation for target variable datasets generation in machine learning based performance prediction. In: IC-STAR 2019, 23-25 September 2019, Bandar Lampung Indonesia.

Gusri, Akhyar and Arinal, Hamni and lusmelia, afriani and Zulmiftahul, Huda (2020) PEMBUATAN PAKAN SAPI BERBENTUK PELET DARI BAHAN ONGGOK UNTUK KELOMPOK PETERNAK DI LAMPUNG SELATAN. In: Senapati, September 2020, Bandar Lampung. (Submitted)

Sukmana, Irza and Sugiyanto, Sugiyanto and Eka Risano, A. Yudi (2020) PENINGKATAN PENGETAHUAN DAN KEMAMPUAN DASAR PENGELASAN MAJU (ADVANCED WELDING) SISWA SEKOLAH MENENGAH KEJURUAN NEGERI (SMKN) 1 SEPUTIH AGUNG, KABUPATEN LAMPUNG TENGAH. In: Seminar Nasional Pengabdian Masyarakat Teknologi dan Inovasi (SENAPATI), 24 April 2019, Bandar Lampung.

Patent

SERTIFIKAT PATEN SEDERHANA (2020) ALAT PEMBANGKIT LISTRIK TENAGA AIR. IDS000002926.

Other

Agustian, Joni (2020) Similarity Check: Turnitin PROSES PEMBUATAN ENZIM GLUKOAMILASE TERIMOBILISASI PADA PENYANGGA SILIKA BUSA SELULER MESOSTRUKTUR SECARA ADSORPSI. DJKI Kemhukham RI.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_An experimental investigation of the mechanical strength of cold-drawn AISI 1018 steel under high-temperature steady- and transient-state conditions. Elsevier, Construction and Building Materials.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Experimental investigation of mechanical properties of cold-drawn AISI 1018 steel at high-temperature steady-state conditions. Elsevier, Journal of Materials Research and Technology.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_High-temperature corrosion of aluminized-AISI 1020 steel with NaCl and Na2SO4 deposits. Indian Academy of Sciences-Springer, Bulletin of Materials Science.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_High-temperature oxidation behavior of aluminized AISI 4130 steel. American Institute of Physics Publishing Ltd, AIP Conference Proceeeding: ISFAP 2015.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Hot-corrosion of AISI 1020 steel in a molten NaCl-Na2SO4 eutectic at 700°C. American Institute of Physics Publishing Ltd., AIP Conference Proceeeding: ICESNANO 2016.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Improvement of low-cycle fatigue resistance in AISI 4140 steel by annealing treatment. Elsevier, International Journal of Fatigue.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Increasing of mild steel ST 41 grade hardness by carburizing treatment using an active carbon from coconut shell and CaCO3 catalyst from chicken eggshell. Penerbit Jurusan Teknik Mesin, Universitas Trisakti-Jakarta, Prosiding SNTTM 2019.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Isothermal Oxidation Behavior of Aluminized AISI 1020 Steel at the Temperature of 700 oC. The Institute of Research & Community Outreach - Petra Christian University, Jurnal Teknik Mesin- Univ. Kristen Petra.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_Low Cycle Fatigue Analysis of an Annealed AISI 4140 Steel. Penerbit Program Studi Teknik Mesin-Universitas Nusa Cendana-Kupang, Prosiding SNTTM 2018.

Badaruddin, Mohammad (2020) Hasil peer review gabungan_The resistance of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850°C. IOP Publishing Ltd., Material Research Express. (Unpublished)

Badaruddin, Mohammad (2020) Similarity check result: An experimental investigation of the mechanical strength of cold-drawn AISI 1018 steel under high-temperature steady- and transient-state conditions. Elsevier, Construction and Building Materials. (Unpublished)

Badaruddin, Mohammad (2020) The resistance of an aluminide coating on a high-strength ASTM A29 steel subjected to a temperature of 850°C. IOP Publishing Ltd., Material Research Express. (Unpublished)

Badaruddin, Mohammad and Wardono, Herry and Zulhanif, zulhanif and Harnowo, Supriadi and Salimor, Mario (2020) Similarity check result for Experimental investigation of mechanical properties of cold-drawn AISI 1018 steel at high-temperature steady-state conditions. Elsevier, Journal of Materials Research and Technology.

Bagus Muhammad, Fauzi and Irza, Sukmana and Yanuar, Burhanuddin (2020) Initial Design of Forging Measuring Instrument for Application of Friction Welding. BKS PTN Barat Bidang Ilmu Teknik, JIT Journal of Innovation and Technology.

Deo Renaldo, Scorpion and Irza, Sukmana and A. Yudi Eka, Risano (2020) PENGARUH KECEPATAN PAHAT LAS (TOOL) TERHADAP KUALITAS HASIL PENGELASAN GESEK PUNTIR (FRICTION STIR WELDING) PADA PROSES PENYAMBUNGAN ALUMINIUM TIDAK SEJENIS (DISSIMILAR) AL1100 DAN AL5052. Jurusan Teknik Mesin – Fakultas Teknik Kampus Terpadu Universitas Bangka Belitung, Machine; Jurnal Teknik Mesin.

Panuju, Yahya (2020) Implications of automotive product sustainability on young customers’ purchase intention in developing countries: an experimental approach. iops.

Risano, A.Yudi Eka and Prabowo, A.D (2020) nergetic and exergetic performance computation of coal�fired steam power plant using IAPWS IF-97 formulation for target variable datasets generation in machine learning based performance prediction. IOP Conference Series: Materials Science and Engineering, IC-STAR 2019 IOP Publishing.

Savetlana, Shirley and Lubis, Asnawi and Lingga, Aditya and Muhammad, Irfan and Dedi, Siadari and Gunawan, Efendi and Muhammad, Yusuf and Hel, Jefri (2020) Fly ash/phenolic resin composite for brake pad application: Fabrication, materials and thermal properties. The Polish Society of Composite Materials.

Savetlana, Shirley and Lubis, Asnawi and Lingga, Aditya and Muhammad, Irfan and Dedi, Siadari and Gunawan, Efendi and Muhammad, Yusuf and Hel, Jefri (2020) Fly ash/phenolic resin composite for brake pad application: Fabrication, materials and thermal properties. The Polish Society of Composite Materials.

Sugiyanto, Sugiyanto (2020) Similarity Check Judul 9P: Low Cycle Fatigue Analysis of an Annealed AISI 4140 Steel. LPPM-Unila.

Sugiyanto, Sugiyanto (2020) Similarity DEGRADATION OF MILD STEEL IN ETHANOL BURNING ENVIRONMENT: OXIDATION KINETICS AND MICROSTRUCTURAL ASPECT. GEOMATE International Society. (Unpublished)

Sugiyanto, Sugiyanto and Badaruddin, Mohammad (2020) Similarity DEGRADATION OF MILD STEEL IN ETHANOL BURNING ENVIRONMENT: OXIDATION KINETICS AND MICROSTRUCTURAL ASPECT. GEOMATE International Society, International Journal of GEOMATE.

This list was generated on Fri Mar 29 20:59:16 2024 WIB.