Panuju, Yahya and Akbar, Gustian Ilham and Hamni, Arinal and Ibrahim, Gusri (2023) Analisis kebutuhan konsumen pada desain sterilizer receiver box dengan metode Quality Function Deployment (QFD). Mechanical Jurnal Ilmiah Teknik Mesin, 14 (2). ISSN 2087-1880

Ibrahim, Gusri and Hamni, Arinal and Burhanuddin, Yanuar and Panuju, Yahya and Ar Rafi, Sahid and Ramadhan, Rizki (2022) Failure Analysis of The Flour Press Machine and Alternative Solutions at PT Aneka Usaha Laba Jaya Utama Pesawaran. Indonesian Journal of Engineering and Science, 3 (3). pp. 39-47. ISSN 2774-373X

Panuju, Yahya and Martinus, Martinus and Hamni, Arinal and Tarkono, Tarkono (2022) Aplikasi Strategi Desain Ramah Lingkungan pada Produk Rumah Tangga: Modifikasi Produk Mesin Cuci 2 Tabung. Mechanical Jurnal Ilmiah Teknik Mesin, 13 (2). pp. 1-7. ISSN 2087-1880

Hamni, Arinal and Panuju, Yahya and Ambarwati, Dwi Asri Siti (2021) Understanding consumers’ behaviour for reducing environmental and social impact through sustainable product - A Study case of vehicles usage in Indonesia design – A Study case of vehicles usage in Indonesia. IOP Conference Series: Earth and Environmental Science, 739 (012052). pp. 1-10. ISSN 1755-1315

Ibrahim, Gusri and Hamni, Arinal (2020) Analisis Keausan Pahat pada Pemesinan Bor Magnesium AZ31 Menggunakan Metode Taguchi. JURNAL TEKNIK MESIN – ITI, 4 (1). pp. 6-11. ISSN 2548-3854

Ibrahim, Gusri and Hamni, Arinal and Afriani, Lusmeilia (2020) Pembuatan Mesin Cetak Pelet Pakan Ternak Berbahan Baku Onggok Untuk Kelompok Peternak Sapi di Terbanggi Subing Lampung Tengah. Dharma Raflesia Jurnal Ilmiah Pengembangan dan Penerapan IPTEKS.

Ibrahim, Gusri and Hamni, Arinal (2019) ANALISIS KEKASARAN PERMUKAAN DAN KEBULATAN PADA PEMESINAN DRILL PADUAN MAGNESIUM MENGGUNAKAN METODE TAGUCHI. Machine; Jurnal Teknik Mesin Vol. 5 No. 1, April 2019.

Ibrahim, Gusri and Hamni, Arinal (2019) Pembuatan dan Pengujian Mesin Pemotong Lidi Tusuk Sate. JURNAL PENGABDIAN PADA MASYARAKAT, 4 (4). pp. 421-430. ISSN 2540-8747

Despa, Dikpride and Nama, Gigih Forda and Martin, Yul and Hamni, Arinal and Muhammad, Meizano Ardhi and Surinanto, Agus (2018) Monitoring dan Manajemen Energi Listrik Gedung Laboratorium Berbasis Internet of Things (IoT). In: Fortei 2018, 11-13 Oktober 2018, Malang Jawa Timur.

Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria (2017) Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. In: icstar, Bandar Lampung.

Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria (2017) Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. In: icstar, 5 Oktober 2017, Bandar Lampung.

Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria (2017) Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. In: ICSTAR, 5 Oktober 2017, Bandar Lampung.

Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria (2017) Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. In: ICSTAR.

Ibrahim, Gusri Akhyar and Hamni, Arinal and Jamiatul, Akmal (2016) Keausan Mata Pahat Karbida pada Pemesinan Inconel 718 Menggunakan Pelumas Berkwantitas Minimum. In: SNTTM Bandung, 2016, Bandung.

Ibrahim, Gusri Akhyar and Hamni, Arinal and Akmal, Jamiatul (2016) Application of Taguchi Method L9 for Tool Life and Surface Roughness in Turning of Inconel 718 under Dry Cutting. In: ESTIC.

Burhanuddin, Yanuar and Hamni, Arinal and Harun, Suryadiwansa and Ismanto, Nur and Arifin, Zaenal (2012) Penentuan Kondisi Kelonggaran Cetakan Optimum Pada Pemotongan Logam Plat Menggunakan Deform2D dan Pendekatan Analisis Ragam (ANOVA). In: Seminar Nasional Tahunan Teknik Mesin (SNTTM) XI, 16-17 Oktober 2012, Universitas Gadjah Mada, Yogyakarta.

harun, suryadiwansa and Panuju, Yahya and Hamni, Arinal (2012) Studi Awal Interaksi Man-Machine pada Mesin Cetak Genteng Sistem Banting. Jurnal Mechanical, 3 (1). pp. 40-44. ISSN 2087-1880

Hamni, Arinal and Gandidi, Indra Mamad and Burhanuddin, Harmen (2010) Pengelolaan sampah terpadu Kota Bandarlampung dengan model R4P (reuse, recycle, reduce, replace, and participation). In: Seminar Nasional Sains & Teknologi – III, 18-19 Oktober 2010, Lembaga Penelitian – Universitas Lampung, Bandarlampung.

Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method.

Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method.

Ibrahim, Gusri and Hamni, Arinal and Puji, Sri Maria Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method. Analysis of surface roughness value when drilling magnesium AZ31 using Taghuci Method.

Ibrahim, Gusri Akhyar and Hamni, Arinal and Bagus, Purnomo and Suryadiwansa, Harun and Yanuar, Burhanuddin The Machined Surface of Magnesium AZ31 After Rotary Turning at Air Cooling Condition. The Machined Surface of Magnesium AZ31 After Rotary Turning at Air Cooling Condition.

Akhyar Ibrahim, Gusri and Hamni, Arinal and Purnomo, Bagus and harun, suryadiwansa and Burhanuddin, Yanuar The machined surface of magnesium AZ31 after rotary turning at air cooling condition. Materials Science and Engineering, 344. ISSN 1757-899X