Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 17.

Article

Panuju, Yahya and Martinus, Martinus and Burhanuddin, Yanuar and Tarkono, Tarkono (2018) Peningkatan Sensitivitas Kewirausahaan dan Pemahaman Manajemen Produksi Unit Usaha Komunitas Pembersih Pantai di Lampung Selatan. PENINGKATAN SENSITIVITAS KEWIRAUSAHAAN DAN PEMAHAMAN MANAJEMEN PRODUKSI UNIT USAHA KOMUNITAS PEMBERSIH PANTAI DI LAMPUNG SELATAN, 1 (1). pp. 1086-1098. ISSN 978-602-53553-0-1

Burhanuddin, Yanuar and Wakhid, Nur and Sukmana, Irza and Tarkono, Tarkono and Yudi Eka Rosano, Ahmad (2018) Planning and Heating Analysis of Squeeze Casting Die Devices for Preparation of Basic Materials for Magnesium AZ31 Bone Bolts. Prosiding Seminar Nasional Tahunan Teknik Mesin (SNTTM) ke 17. pp. 124-130. ISSN 2623-0313

Burhanuddin, Yanuar (2018) Studi Sifat Mekanik Magnesium AZ31 Hasil Proses Pengecoran Tekan (Squeeze Casting). Jurnal Energi dan Manufaktur, 11 (1). pp. 1-5. ISSN 2541-5328

Prabowo, Ardian and Sukmana, Irza and Burhanuddin, Yanuar (2017) Las Gesek (Friction Welding) Logam Tidak Sejenis (Dissimilar Metals) Magnesium AZ-31 Terhadap Aluminum AL-13. Industrial Research Workshop and National Seminar Politeknik Negeri Bandung, 8. pp. 248-251. ISSN 978 – 979 – 3541 – 55 - 6

Perwira, Cholyan and Burhanuddin, Yanuar and Panuju, Yahya (2014) Perencanaan Proses Tungku Pengering Kotoran Hewan Ternak. Jurnal Fresh Mechanical (FEMA), 2 (1). pp. 66-77. ISSN 2337 - 4780

Muhriyana, Ryan and Burhanuddin, Yanuar and Panuju, Yahya (2013) Aplikasi Rencana Pemotongan Plat Menggunakan Sistem Pakar. Jurnal Fresh Mechanical (FEMA), 1 (2). pp. 25-36. ISSN 2337 - 4780

Sukmana, Irza and Burhanuddin, Yanuar (2007) THE EFFECT OF SENSITIZATION TEMPERATURE ON STRESS CORROSION CRACKING OF STAINLESS STEEL AISI 304 IN SULPHATE ACID ENVIRONMENT. JURNAL TEKNIK, 14 (2). pp. 115-122. ISSN 0854-2139

Sulistiyanti, Sri Ratna and Burhanuddin, Yanuar and Harun, Suryadiwansa Characterization of Cutting Temperature and Ignition Phenomena of Magnesium Chip using Infrared Imaging. Advanced Materials Research, 588. pp. 1744-1747. ISSN 1662-8985

Akhyar Ibrahim, Gusri and Hamni, Arinal and Purnomo, Bagus and harun, suryadiwansa and Burhanuddin, Yanuar The machined surface of magnesium AZ31 after rotary turning at air cooling condition. Materials Science and Engineering, 344. ISSN 1757-899X

Conference or Workshop Item

Sinaga, Jorfri Boike and Burhanuddin, Yanuar and Sulsitiyo, Bambang (2018) Rancang Bangun Turbin Crossflow Untuk Pembangkit Listrik Tenaga Air Dengan Memanfaatan Energi Aliran Sungai Penyungkayan Di Dusun Penyungkayan Kecamatan Balik Bukit Kabupaten Lampung Barat Provinsi Lampung. In: Seminar Nasional Hasil Penelitian Sains, Teknik, dan Aplikasi Industri 2018, 19 October 2018, Bandar Lampung. (In Press)

Sukmana, Irza and Savetlana, Shirley and Hermanto, Asep and Burhanuddin, Yanuar and Jasmawati, Noor (2016) A Review on Magnesium-based Materials for Bone Applications. In: The 2nd Composite Materials and Manufacturing Symposium (CMMS 2016), November 13-14, 2016, Kuala Lumpur, Malaysia.

Burhanuddin, Yanuar and Setiawan, Feni and Harun, Suryadiwansa and Fitriawan, Helmy (2015) Pemodelan Penyalaan Pada Proses Bubut Kering Magnesium AZ31 Menggunakan Jaringan Syaraf Tiruan. In: Seminar Nasional Tahunan Teknik Mesin XIV (SNTTM XIV), 7-8 Oktober 2015, Banjarmasin.

Burhanuddin, Yanuar and Hamni, Arinal and Harun, Suryadiwansa and Ismanto, Nur and Arifin, Zaenal (2012) Penentuan Kondisi Kelonggaran Cetakan Optimum Pada Pemotongan Logam Plat Menggunakan Deform2D dan Pendekatan Analisis Ragam (ANOVA). In: Seminar Nasional Tahunan Teknik Mesin (SNTTM) XI, 16-17 Oktober 2012, Universitas Gadjah Mada, Yogyakarta.

Burhanuddin, Yanuar (2012) Manufaktur Ramah Lingkungan: Suatu Tinjauan Pemesinan Paduan Magnesium Menggunakan Termografi. In: Seminar Nasional Energi Terbarukan & Produksi Bersih 2012.

Burhanuddin, Yanuar and Che Haron, Che Hassan and Ghani, Jaharah A. and Ihsan, A.K.A.M. and Ibrahim, G.A and Yasir, Ahmad and El-Maghriby, Nagib (2008) Tool Life Assessment using Fractional Factorial Method in Turning of Titanium Alloy with CBN cutting tool. In: Seminar on Engineering Mathematics, Malaysia.

Burhanuddin, Yanuar and Purnomo, Muhammad Ridwan. A. and Che Haron, Che Hassan and Rochim, Taufiq (2005) Expert System Using For Group Technology Based on NC Programming Capability. In: Conference on Computer Integrated Systems 2005 (ConCIS 2005), 6 - 8 December, 2005, Putrajaya, Malaysia.

Che Haron, Che Hassan and Ghani, Jaharah A. and Ibrahim, Gusri A. and Burhanuddin, Yanuar Effects of cutting Parameters on surface Roughness of AISI D2 in Turning Using Coated and Uncoated Carbide Tools. In: Quality in Research (QIR 2006), 6-7 September 2006, University of Indonesia, Depok.

This list was generated on Sun Jan 26 04:08:05 2020 WIB.