Hartono, Rudi and Wahyudi, Imam and Febrianto, Fauzi and Dwianto, Wahyu and Hidayat, Wahyu and Jang, Jaehyuk and Lee, Seunghwan and Park, Sehwi and Kim, Namhun (2016) Quality Improvement of Oil Palm Trunk Properties by Close System Compression Method. Journal of the Korean Wood Science and Technology, 44 (2). pp. 172-183. ISSN 1017-0715

[img]
Preview
Text
Wahyu Hidayat-Quality Improvement of Oil Palm Trunk Properties by Close System Compression Method.pdf

Download (2MB) | Preview
Official URL: http://kswst.or.kr/english/journal.asp

Abstract

Densification of the inner part of oil palm trunk (OPT) by the close system compression (CSC) method was performed in this study. The effects of the compression temperature and time on the anatomical, physical and mechanical properties of OPT were evaluated. The inner part of OPT with an initial average density of 0.3 g/cm³ was used as samples. Oven-dried samples were immersed in water and vacuumed until fully saturated and then compressed by CSC at 120, 140, 160 or 180 °C for 10, 20, 30 or 40 min. The anatomical characteristics of transverse and radial sections before and after compression were compared by optical microscopy. The physical and mechanical properties, including the density, recovery of set (RS), modulus of elasticity (MOE), modulus of rupture (MOR), and compression parallel to grain were examined. It was observed that the anatomical characteristic of the inner part of OPT (i.e., vascular bundles, vessels, and parenchyma tissue) became flattened, fractured, and collapsed after compression by CSC. The RS decreased with increasing compression temperature and time. The lower RS indicated high dimensional stability. The physical and mechanical properties (i.e., density, MOR, MOE, and compressive strength) of the inner part of OPT increased with increasing compression temperature and time. Compression by the CSC method at 160 °C for 40 min was the optimum treatment.

Item Type: Article
Uncontrolled Keywords: close system compression, compressed wood, oil palm trunk, physical and mechanical properties, recovery of set.
Subjects: S Agriculture > SD Forestry
Divisions: Fakultas Pertanian (FP) > Prodi Kehutanan
Depositing User: Wahyu Hidayat
Date Deposited: 27 Oct 2016 02:33
Last Modified: 27 Oct 2016 02:33
URI: http://repository.lppm.unila.ac.id/id/eprint/943

Actions (login required)

View Item View Item