Ibrahim, Gusri and Yahya, achmat and Arinal, Hamni and Yanuar, Burhanuddin (2023) Analisis Gaya Potong pada Pemesinan Bubut Magnesium AZ31 Dalam Keadaan Kering. A R M A T U R, 4 (2). pp. 146-154. ISSN : 2722-0796
|
Text
3805-Article Text-9010-1-10-20230824, Published.pdf Download (459kB) | Preview |
Abstract
The cutting of magnesium alloy by using a single cutting method as known by turning process. In the machining process, the cutting tool used in long time will experience wear and damage. The tool wear on the cutting edge was caused by cutting force that took place during cutting process. The cutting force depend one tool geometry, workpiece material, tool material and cutting condition. The objective of this research is to analyze the cutting force during turning process using the cutting force measurement. In this experiment, the cutting tool used of High Speed Steel, workpiece material of magnesium alloy and strain gauge sensor to measure cutting force. The results show that the spindle speed and cutting speed influenced on cutting force, in which increasing in spindle speed and cutting speed produced low cutting force. Whereas, increasing in feed rate and depth of cut significant effect on increasing the cutting.force.
| Item Type: | Article |
|---|---|
| Subjects: | T Technology > TS Manufactures |
| Depositing User: | Dr Gusri Ibrahim |
| Date Deposited: | 21 Sep 2023 04:14 |
| Last Modified: | 21 Sep 2023 04:14 |
| URI: | http://repository.lppm.unila.ac.id/id/eprint/52480 |
Actions (login required)
 |
View Item |