Sinaga, Jorfri Boike and Yonanda, Ahmad and Sinaga, DAVID and Topan, Tri and Bahtera, Gomes (2024) Pengaruh Bentuk Sudu terhadap Efisiensi Turbin Air Gravitasi Aliran Vortex. TURBO, 13 (2). pp. 574-582. ISSN p-ISSN: 2301-6663, e-ISSN: 2477-250X
![]() |
Text
Pengaruh Bentuk Sudu terhadap Efisiensi Turbin Air Gravitasi.pdf Download (485kB) |
Abstract
TURBO Vol. 13 No. 02. 2024 p-ISSN: 2301-6663, e-ISSN: 2477-250X Jurnal Program Studi Teknik Mesin UM Metro URL: http://ojs.ummetro.ac.id/index.php/turbo DOI: http://dx.doi.org/10.24127/trb.v13i2.3689 Received September 24, 2024; Received in revised form December 21, 2024; Accepted December 28, 2024 Available online December 31, 2024 574 Pengaruh Bentuk Sudu terhadap Efisiensi Turbin Air Gravitasi Aliran Vortex Jorfri Boike Sinaga1, David Sinaga2, Ahmad Yonanda3, Tri Topan4, Gomes Bahtera5 1Jurusan Teknik Mesin, Fakultas Teknik, Universitas Lampung Jl. Prof. Dr. Sumantri Brojonegoro No. 1, Gedung H Lt.2, Bandar Lampung, Lampung, Indonesia 2Prodi Teknik Mesin, Fakultas Teknik, Universitas Lampung Jl. Prof. Dr. Sumantri Brojonegoro No. 1, Gedung H Lt.2, Bandar Lampung, Lampung, Indonesia *Corresponding author: jorfri6@yahoo.com Abstract This paper presents the results of a study on the effect of blade shape on the efficiency of a free-vortex water turbine. Laboratory experiments were conducted to measure the shaft power output and overall turbine efficiency. Water turbines with six blades and three different blade shapes (flat blade, twisted blade, and curved blade) were designed and tested to determine the most optimal blade profile. The turbines were tested in a conical basin with an inlet diameter of 600 mm, an outlet diameter of 100 mm, and a height of 800 mm, at flow rates of 0.0088 m³/s, 0.0105 m³/s, and 0.0108 m³/s. The results showed that the turbine with a curved blade profile achieved the highest efficiency, reaching 30,46% at a flow rate of 0.0108 m³/s. Keywords: Turbine, Vortex, and Efficiency
Item Type: | Article |
---|---|
Subjects: | T Technology > TJ Mechanical engineering and machinery |
Divisions: | Fakultas Teknik (FT) > Prodi Teknik Mesin |
Depositing User: | JORFRI BOI |
Date Deposited: | 20 Mar 2025 01:29 |
Last Modified: | 20 Mar 2025 01:29 |
URI: | http://repository.lppm.unila.ac.id/id/eprint/54464 |
Actions (login required)
![]() |
View Item |