Gusri, Akhyar and Arinal, Hamni (2019) Analisa statistik nilai kekasaran permukaan dan profil permukaan Ti-6AL-4V ELI pada pemesinan micro-milling. In: SEMINAR NASIONAL ILMU TEKNIK DAN APLIKASI INDUSTRI, 25 September 2019, Bandar Lampung.
|
Text
PROSIDING_SINTA_2019-2020.pdf Download (19MB) | Preview |
Abstract
Ti 6AL-4V ELI is applied in industries equipments mainly in biomedic implant. Ti 6AL-4V ELI has well stiffness ratio over weight, corrosion resistance, and biocompatibility. Due to low thermal conductivity, it is necessary to choose the appropriate machining parameters to produce a good surface roughness value. Point of this study was to analyze the value of surface roughness, to determine the effect of parameter and configure mathematic model for surface roughness value. This study used full factorial method with 4 factors, 2 levels and 16 times attempt. Analysis shows the lowest surface roughness value is 0.26 μm and the highest surface roughness value is 0.90 μm. Based on the results of the analysis using Analyze Factorial Design, it’s found that a significant parameter is the tool diameter of 0,000. Mathematic model for surface roughness value was Ra = 0.723 – 0.3050 D + 0.000014 n – 0.18.1 f + 0.001650 t.
| Item Type: | Conference or Workshop Item (Paper) |
|---|---|
| Subjects: | T Technology > TJ Mechanical engineering and machinery |
| Depositing User: | Dr Gusri Ibrahim |
| Date Deposited: | 19 May 2020 06:42 |
| Last Modified: | 19 May 2020 06:42 |
| URI: | http://repository.lppm.unila.ac.id/id/eprint/20087 |
Actions (login required)
 |
View Item |