Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | H | I | L | S
Number of items: 15.

A

Akmal, Jamiatul (2012) Kaji Eksperimen untuk Distribusi Tegangan Geser Lapisan Adesif pada Sambungan Pipa Komposit. Proceeding Seminar Nasional Energi Terbarukan & Produksi Bersih 2012, - (-). pp. 299-303. ISSN 0016087403

B

Badaruddin, Mohammad and Sugiyanto, Sugiyanto and Suudi, Ahmad (2012) Influence of water-vapor on the isothermal oxidation behavior of aluminized AISI 1020 steel at elevated temperatures. Procedia Engineering, 50. pp. 649-657. ISSN 1877-7058

Burhanuddin, Yanuar (2012) Manufaktur Ramah Lingkungan: Suatu Tinjauan Pemesinan Paduan Magnesium Menggunakan Termografi. In: Seminar Nasional Energi Terbarukan & Produksi Bersih 2012.

Burhanuddin, Yanuar and Hamni, Arinal and Harun, Suryadiwansa and Ismanto, Nur and Arifin, Zaenal (2012) Penentuan Kondisi Kelonggaran Cetakan Optimum Pada Pemotongan Logam Plat Menggunakan Deform2D dan Pendekatan Analisis Ragam (ANOVA). In: Seminar Nasional Tahunan Teknik Mesin (SNTTM) XI, 16-17 Oktober 2012, Universitas Gadjah Mada, Yogyakarta.

H

harun, suryadiwansa (2012) Advanced Materials Research, ISSN. 1662-8985. Vol. 588-589 pp.1744-1747, 2012.Characterization of Cutting Temperature and Ignition Phenomena of Magnesium Chip Using Infrared Imaging. Characterization of Cutting Temperature and Ignition Phenomena of Magnesium Chip using Infrared Imaging, 588-58. pp. 1744-1747. ISSN 1662-8985

harun, suryadiwansa (2012) Studi Awal Interaksi Man-Machine Pada Mesin Cetak Genteng Sistem Banting. Jurnal Mechanical, 3 (1). pp. 40-44. ISSN 2087-1880

harun, suryadiwansa (2012) Studi Eksperimental Pengaruh Kecepatan Putar Pahat Terhadap Surface Roughness pada Pemesinan Bubut Kering Dengan Actively Driven Rotary Tool. In: Seminar Nasional Energi Terbarukan Dan produksi Bersih 2012, 20 Juni 2012, Bandar Lampung.

harun, suryadiwansa and Panuju, Yahya and Hamni, Arinal (2012) Studi Awal Interaksi Man-Machine pada Mesin Cetak Genteng Sistem Banting. Jurnal Mechanical, 3 (1). pp. 40-44. ISSN 2087-1880

I

Ibrahim, Gusri and Tarkono, Tarkono and Panuju, Yahya (2012) Umur Pahat dan Kekasaran Permukaan Sewaktu Pemesinan Ti-6% Al-4% V ELI pada Kecepatan Tinggi. Prosiding Seminar Nasional Energi Terbarukan dan Produksi Bersih 2012. ISSN 978-979-8510-49-6

L

Lubis, Asnawi and Suudi, Ahmad and Tanti, Novri (2012) Nonlinear finite element analysis of pressurized LPG toroidal tank with radial flush nozzle. Proceeding Seminar Nasional Tahunan Teknik Mesin (SNTTM) ke-11 dan Thermofluid IV, 1 (1). pp. 957-961. ISSN 2302-4542

S

Savetlana, Shirley and Rajaguguk, Tumpal Ojahan and Zhohanes, MZ and Nardianto, Nardianto (2012) Mechanical Properties of Pineapple Fiber and Unidirectional Pineapple Fiber Reinforced Polyester Composite. In: Proceeding Seminar Nasional Tahunan Teknik Mesin XI (SNTTM XI) & Thermofluid IV Universitas Gadjah Mada (UGM), 16 Oktober 2012, Jogyakarta.

Sugiyanto, Sugiyanto (2012) Influence of water-vapor on the isothermal oxidation behavior of aluminized AISI 1020 steel at elevated temperatures. Procedia Engineering (50). ISSN 1877-7058

Sugiyanto, Sugiyanto (2012) Influence of water-vapor on the isothermal oxidation behavior of aluminized AISI 1020 steel at elevated temperatures. Procedia Engineering. ISSN 1877-7058

Sukmana, Irza (2012) Microvascular Guidance: A Challenge to Support the Development of Vascularised Tissue Engineering Construct. The Scientific World Journal.

Sukmana, Irza (2012) PLAGIARISM_Bioactive polymer scaffold for fabrication of vascularized engineering tissue. The Japanese Society for Artificial Organs.

This list was generated on Sat May 30 07:30:13 2020 WIB.