Febrianto, Fauzi and Sahroni, Sahroni and Hidayat, Wahyu and Bakar, Edi S. and Kwon, Gujoong and Kwon, Jinheon and Hong, Soonil and Kim, Namhun (2012) Properties of Oriented Strand Board made from Betung Bamboo (Dendrocalamus asper (Schultes. f) Backer ex Heyne). Wood Science and Technology, 46 (1). pp. 53-62. ISSN 0043-7719

Wahyu Hidayat-Properties of Oriented Strand Board made from Betung Bamboo (Dendrocalamus asper (Schultes.f) Backer ex Heyne).pdf

Download (209kB) | Preview
Official URL: http://link.springer.com/journal/226


Bamboo has gained increasing attention as an alternative raw material for use in the manufacture of composite boards. Three-layer OSBs were made using Betung bamboo (Dendrocalamus asper (Schultes.f) Backer ex Heyne) strands to evaluate the effects of strand length and pre-treatment techniques on the physical, mechanical, and durability properties. Three different strand lengths, namely 50, 60, and 70 mm, were prepared. Prior to the manufacture into OSB, the strands were immersed in cold water for 24 h and in 6% acetic anhydrides solution for 48 h. The OSBs were fabricated using 5% MDI resin based on the strand dry weight. The results indicated that MOR and MOE values in perpendicular to the grain direction were much influenced by strand length. The dimensional stability of OSB was slightly improved by immersing the strands in acetic anhydride solution. Immersing strands in cold water and acetic anhydride solution improved the resistance of OSB against subterranean termite (Macrotermes gylvus) attack under the adopted experimental condition. All OSB parameters manufactured in this experiment were better than the minimum requirement of CSA 0437.0 (Grade O–2) standard.

Item Type: Article
Subjects: S Agriculture > SD Forestry
Divisions: Fakultas Pertanian (FP) > Prodi Kehutanan
Depositing User: Wahyu Hidayat
Date Deposited: 27 Oct 2016 02:32
Last Modified: 27 Oct 2016 02:32
URI: http://repository.lppm.unila.ac.id/id/eprint/942

Actions (login required)

View Item View Item