Helmi, Masdar and Hall, Matthew R and Rigby, Sean P (2018) Effect of Pressure and Heat Treatments on the Compressive Strength of Reactive Powder Concrete. MATEC, 147 (01006). ISSN 2261-236X

Preview	Text matecconf_sibe2018_01006.pdf Download (795kB) | Preview
	Text matecconf_sibe2018_01006.html - Published Version Download (40kB)

Abstract

This paper presents the corresponding compressive strength of RPC with variable pressure combined with heating rate, heating duration, and starting time of heating. The treatments applied were 8 MPa static pressure on fresh RPC prims and heat curing at 240 °C in an oven. The compressive strength test was conducted at 7-d and 28-d. The images of RPC morphology were captured on the surface of a fractured specimen using Scanning Electron Microscopy in Secondary Electron detector mode to describe pore filing mechanism after treatments. The results show that a heating rate at 50 °C/hr resulted in the highest compressive strength about 40 % more than those at 10 or 100 °C/hr. A heating duration of 48 hours led to the maximum compressive strength. Heat curing applied 2 days after casting resulted in the maximum compressive. Heat curing had a signicant effect on the compresssive strength due to the acceleration of both reactions (hydration and pozzolanic) and the degree of transformation from tobermorite to xonotlite. It is concluded that the optimum condition of treatments is both pressure and heat curing at 2-day after casting with a rate of 50 °C/hr for 48 hours.

Item Type:	Article
Subjects:	T Technology > TA Engineering (General). Civil engineering (General)
Divisions:	Fakultas Teknik (FT) > Prodi Teknik Sipil
Depositing User:	MASDAR HELMI, Ph.D.
Date Deposited:	26 Apr 2018 04:00
Last Modified:	26 Apr 2018 04:00
URI:	http://repository.lppm.unila.ac.id/id/eprint/6418

Actions (login required)

View Item